Higher Efficiency of Triethanolamine-Grafted Anion Exchange Membranes for Acidic Wastewater Treatment

Muhammad Imran Khan,Jinzhan Su,Eric Lichtfouse,Liejin Guo

DOI: https://doi.org/10.5004/dwt.2020.25966

IF: 1.1

2020-01-01

Desalination and Water Treatment

Abstract:Acidic wastewaters are major industrial effluents that must be cleaned before release in natural waters, yet classical treatment methods are limited. Diffusion dialysis through anion exchange membranes (AEM) appears as a sustainable alternative because those membranes are cheap and highly selective, yet there is a need for improved membranes. Here we synthesized AEMs from brominated poly(2,6-dimethyl-1,4-phenylene oxide) using triethanolamine as an ion-exchange group for acid recovery. The prepared membranes were characterized by Fourier-transform infrared spectroscopy, scanning electron microscopy, and atomic force microscopy. Acid recovery was tested with a mixture of HCl and FeCl2. Results show that increasing triethanolamine content into the membrane polymer matrix led to an increase of water uptake from 12% to 117%, ion exchange capacity from 1.28 to 2.29 mmol/g, and linear swelling ratio from 3.52% to 32.70%. The diffusion dialysis coefficient of acid (U-H(+)) reached 23 x 10(-3) m/h, which is higher than that actual membranes, of 0.37-20 x 10(-3) m/h. U-H(+) increased with membrane triethanolamine content, which is explained by increasing H bonding of aqueous protons with membrane hydroxyl groups. U-H(+) also increased from 23 x 10(-3) m/h at 25 degrees C to 71 x 10(-3) m/h at 55 degrees C due to easier ion flow. Moreover, the separation factor (S) reached 495 at 25 degrees C, which is higher than that of actual membranes, of 73-351. The diffusion dialysis coefficient of metal (U-Fe(2+)) ranged from 0.0025 to 61 10(-3) m/h. Membranes also showed excellent thermal, chemical and mechanical stability.