Abstract:Wall-modeled large-eddy simulation (WMLES) is widely recognized as a useful method for simulation of turbulent flows at high Reynolds numbers. Nevertheless, a continual issue in different wall models is the shift of the mean velocity profile from the wall-model/RANS (Reynolds-averaged Navier-Stokes) region to the LES region. This phenomenon, referred to as logarithmic layer mismatch (LLM), occurs in both wall shear stress models and hybrid RANS/LES models. Many efforts have been made to explain and resolve this mismatch, including decreasing the high correlation between the wall shear stress and the velocity at the matching layer, modifying the subgrid-scale (SGS) eddy viscosity, and adding a stochastic forcing. It is widely believed that the inclusion of the resolved Reynolds shear stress (or the convection term) is essential to elliminate the LLM, as it prevents the overseimation of the modeled Reynolds shear stress and promotes the generation of the small-scale flow structures in the near-wall region. In this work, by comparing three different SGS eddy viscosity models, we demonstrate that ensuring the total shear stress conservation (TSSC) conservation is key to resolving the LLM. Under the TSSC framework, the effect of the convection term on LLM can be quantitatively assessed. Furthermore, a modified SGS eddy viscosity modfication model that adheres to the TSSC constraint is tested at different Reynolds numbers (Re_τ=1000, 2000, 4200). Our results demonstrate the robust performance of the present model in predicting skin friction and low-order turbulence statistics, even under a relatively low grid resolution (Δ x^+, Δ z^+ ≲ 500, 2≤Δ_x/Δ_y,mat≤ 4, where Δ_y,mat is the wall-normal grid spacing in the wall-model region).

Les-rans modeling of sudden-expansion flows with and without swirl

Large-eddy Structures of Turbulent Swirling Flows and Methane-Air Swirling Diffusion Combustion

Large-eddy Simulation of Gas-Particle Flows and Validation of a Two-Phase Turbulence Model

Large-Eddy Simulation of Underexpanded Supersonic Swirling Jets

Numerical Simulation of Instantaneous Flow Structure of Swirling and Non-Swirling Coaxial-Jet Particle-Laden Turbulence Flows

Studies on a Swirling Heptane Spray Flame by Large-Eddy Simulation

Large-eddy Simulation of Swirling Gas-Particle Flows Using a USM Two-Phase SGS Stress Model

Large-Eddy Simulation of a Swirling Diffusion Flame Using a SOM SGS Combustion Model

Experimental Validation Of Large-Eddy Simulation For Swirling Methane-Air Non-Premixed Combustion

A hybrid immersed boundary/wall-model approach for large-eddy simulation of high-Reynolds-number turbulent flows

Large-eddy simulation of Cambridge-Sandia stratified flames under high swirl

Comparison of LES and RANS simulation on turbulent round jet

LES Investigation of Swirl Intensity Effect on Unconfined Turbulent Swirling Premixed Flame

Analysis of the three-dimensional swirling and non-swirling jet impingement using a turbulence model with cross-diffusion correction

Large eddy simulation of rotating turbulent channel flow with a new dynamic global-coefficient nonlinear subgrid stress model

Effect of wall stress models and subgrid-scale models for flow past a cylinder at Reynolds number 3900

A Total-Shear-stress-conserved Wall Model for Large-Eddy Simulation of High-Reynolds Number Wall Turbulence

Experimental and numerical study on flow field characteristics of a combustion chamber with double-stage counter-rotating swirlers

Large-eddy simulations of compressible Rayleigh–Taylor turbulence with miscible fluids using spatial gradient model

A review for measurements and simulations of swirling gas-particle flows

Simulation of Sudden-Expansion and Swirling Gas-Particle Flows Using A Two-Fluid Particle-Wall Collision Model with Consideration of the Wall Roughness