Abstract:In this paper, a mechanics-based phase-field model at the microscale is introduced for microstructure evolution during solidification. The couple phase-field model consists of Allen–Cahn equation for phase order parameter, Cahn–Hilliard equation for composition, heat conduction and elasticity equations. The introduced elastic energy allows for volumetric inelastic strains due to melting/solidification as well as a thermodynamically consistent solid-melt interface stress and consequently, residual stresses during solidification at the microscale and deformation can be captured. The computational microcell is considered at the melt-solid interface and the temperature as a time dependent function is used for its boundary conditions to solve the coupled phase-field model. Using COMSOL FE code, examples of columnar growth are studied. As result, the suppressive effect of elastic driving forces and the reduction in solidification rate, due to the volumetric inelastic strains, on solidification are revealed. The inelastic surface stress, concentrated inside the interface, can change the morphology of solidified structure but does not show a remarkable effect on the solidification rate. The thermal strain was included which reduced the effect of volumetric transformation strain and consequently, the internal stresses near constrained regions were decreased. The effect of undercooling was studied which showed that increasing the undercooling increased the temperature gradient in the vertical direction and near the interface and solidification rate and significantly changed the morphology of solidified structure, as a homogeneous growth was resolved for larger undercooling while a columnar growth was obtained for smaller undercooling. Solidification was studied under mechanical loading which showed external loading changes the stress distribution and magnitude and the morphology of solidified structure. Effect of an inclusion on solidification was also investigated. The inclusion represented a more homogeneous distribution of stress and temperature with different magnitudes compared to the rest of the sample, creating a directional solidification toward the inclusion.

Mesomechanical Modeling and Numerical Simulation of the Diffraction Elastic Constants for Ti6Al4V Polycrystalline Alloy

In-situ Investigation Via High Energy X-ray Diffraction of Stress-Induced(0002)α→(110)β Transformation in a Ti-5.5Mo-7.2Al-4.5Zr-2.6Sn-2.1Cr Alloy

Micromechanical Modelling on Thermomechanical Coupling of Superelastic NiTi Alloy

Meso-scale simulation on mechanical behavior of single crystal titanium

Electrical-thermal-mechanical coupled modeling and simulation on deformation behaviors of Ti6554 alloy in electrically-assisted micro-tension

Experimental investigation and crystal plasticity simulation for the fatigue crack initiation of the equiaxed Ti-6Al-4V alloy in the very high cycle regime

A multi-scale constitutive model for analyzing the tensile deformation of eutectic high-entropy alloys

Role of interfaces in the deformation behavior of lamellar TiAl-based alloys with CPFEM simulation

A Mechanics-Based Phase-Field Model and Finite Element Simulations for Microstructure Evolution during Solidification of Ti-6Al-4V

A finite strain micromechanical-based constitutive model: Application to porous polycrystal

Machine Learning Moment Tensor Potential for Modelling Dislocation and Fracture in L1$_0$-TiAl and D0$_{19}$-Ti$_3$Al Alloys

Quantification of α phase strengthening in titanium alloys: Crystal plasticity model incorporating α/β heterointerfaces

Crystal plasticity based constitutive model of NiTi shape memory alloy considering different mechanisms of inelastic deformation

Experiments and crystal plasticity simulations for the deformation behavior of nanoindentation: Application to the α2 phase of TiAl alloy

A crystal plasticity model for metal matrix composites considering thermal mismatch stress induced dislocations and twins

Molecular dynamics simulation of mechanical properties of decagonal quasicrystal approximate phase Al2Fe

Combined crystal plasticity simulations and experiments for parameter identification: application to near-β titanium alloy

Crystal plasticity modeling of deformation behavior of Al–Al2Cu eutectics based on high-fidelity representative microstructures

On the evaluation of uniaxial tensile and fracture properties of Ti‐6Al‐4V by spherical indentation tests with different calculation models

Analysis of Mechanical-Thermal Coupled Experiments of Single Crystal TiNi Alloys

A strain rate and temperature-dependent crystal plasticity model for hexagonal close-packed (HCP) materials: Application to α -titanium