Abstract:Mg alloy casting parts commonly suffer from drawbacks of low surface properties, high susceptibility to corrosion, unsatisfactory absolute strength, and poor ductility, which seriously limit their wide application. Here, a surface nanocrystallization technique, i.e., ultrasonic surface rolling (USR), was applied on an as-cast AZ91 Mg alloy sheet to improve its corrosion resistance and mechanical properties. The USR produces double smooth surfaces with Ra 0.036 μm and gradient nanostructured surface layers on the sheet. Due to this special microstructure modification, the USR sheet exhibits 55% and 50% improvements in yield strength and ultimate tensile strength without visibly sacrificed ductility comparable to its untreated counterpart, as well as a 24% improvement in surface hardness. The USR sheet also shows good corrosion resistance in 3.5wt% NaCl aqueous solution. The corrosion current density of the USR sheet reduces by 63% after immersion for 1 h, and 25% after immersion for 24 h compared to that of the untreated counterpart. The enhanced strength and hardness are mainly related to the gradient nanostructure. The improved corrosion resistance is mainly ascribed to the decreased surface roughness, nanostructured surface, and residual compressive stress. The present results state that USR is an effective and attractive method to improve the multiple properties of Mg alloy casting parts, and thus can be used as an additional and last working procedure to achieve high-performance Mg alloy casting parts.

Effect of Ultrasonic Surface Rolling Treatment on Corrosion Behavior of Alloy 690

Effects of Ultrasonic Surface Rolling and Plasma Nitriding on Microstructure and Properties of 690TT Alloy

Effects of Ultrasonic Rolling on Surface Performance of 7B85-T6 Alloy

Effect of ultrasonic surface rolling process on the surface properties of CuCr alloy

Corrosion Behaviour of Nanocrystallines Alloy 690 at High-Temperature and High-Pressure in Simulated PWR Secondary Environment

Achieving excellent corrosion resistance properties of 7075 Al alloy via ultrasonic surface rolling treatment

Microstructure and Corrosion Behavior of Ultrasonic Surface Treated 7B85 Al Alloy

Investigations on surface modification of nickel-based superalloy subjected to ultrasonic surface rolling process

Enhanced Corrosion Resistance of a Cu10Ni Alloy in a 3.5 Wt% NaCl Solution by Means of Ultrasonic Surface Rolling Treatment

Effect of ultrasonic surface rolling process on the Fretting tribocorrosion behaviors of Inconel 690 alloy

Effects of Ultrasonic Surface Rolling on the Localized Corrosion Behavior of 7B50-T7751 Aluminum Alloy

Effect of Ultrasonic Rolling Surface Technique on the Surface Microstructure and Properties of CuTi Alloys

Enhanced Corrosion Behavior and Mechanical Properties of Al-Zn-Mg-Cu Sheet Alloy by Ultrasonic Surface Rolling Treatment

Effect of Ultrasonic Surface Rolling Process on Surface Properties and Microstructure of 6061 Aluminum Alloy

Effect of Ultrasonic Surface Rolling on the Microstructure and Corrosion Properties of Gear Steel 20CrNiMo After Carburizing

Simultaneously improving tensile properties and stress corrosion cracking resistance of 7075-T6 aluminum alloy by USRP treatment

Electrochemical corrosion behavior of 7075 aluminum alloy with different ultrasonic surface rolling microstructures

Mechanical and corrosion fatigue behaviors of gradient structured 7B50-T7751 aluminum alloy processed via ultrasonic surface rolling

Simultaneously improving mechanical properties and corrosion resistance of as-cast AZ91 Mg alloy by ultrasonic surface rolling

Experimental investigation on ultrasonic surface rolling of Inconel 690TT

Effect of ultrasonic surface rolling process on the microstructure and corrosion behavior of zirconium alloy in high-temperature water condition