Abstract:In this study, we demonstrate the direct in-situ synthesis of NiTi alloys with tunable chemical composition (Ni/Ti atomic ratio) and corresponding thermomechanical response. This synthesis is achieved by regulating the feeding speed ratio of pure Ni and Ti wires during the additive manufacturing process based on dual-wire-feed electron beam directed energy deposition (EB-DED) technology. Under appropriate process conditions, the resulting NiTi alloys exhibit a controllable evolution around the nearequiatomic composition and display a typical columnar grain morphology characteristic of additively manufactured NiTi alloys. With an increase in Ni content (shifting from Ti-rich to Ni-rich), the second phase particles present in the samples change from Ti-rich phase (Ti2 Ni) to Ni-rich phases (such as Ni4 Ti3 and Ni3 Ti2 ). The phase transformation temperatures gradually decrease with increasing Ni content, and the predominant matrix phase transitions from martensite to austenite. The as-built NiTi alloy exhibits a typical tensile curve with a good tensile elongation of 11 %, fabricated under suitable composition and microstructure conditions. This result surpasses values reported in current in-situ synthesized NiTi alloys through additive manufacturing methods. Moreover, it almost reaches the levels achieved by additively manufactured NiTi alloys using pre-alloyed raw materials. Furthermore, this study reports, for the first time in the field of in-situ synthesized NiTi alloys, a good tensile shape memory effect, achieving an impressive recovery rate of up to 70 % under a tensile strain of 6 %. This investigation provides a meaningful theoretical perspective and technical strategy for the integrated customization of NiTi alloy components in structure, composition, and function. This low-cost and high-efficiency approach is particularly attractive for the preparation of functional graded, large-scale and disposable NiTi components. (c) 2024 Published by Elsevier Ltd on behalf of The editorial office of Journal of Materials Science & Technology.

Nanostructured NiTi Shape Memory Alloy <i>Via</i> Ni/Ti Nanolamination

Recent Electron Microscopy Results on Micro- and Nanostructured Ni-Ti-(X) Shape Memory Alloys

A novel strategy for fabricating phase transforming NiTi shape memory alloy via multiple processes of severe plastic deformation

Solidification characterization and its correlation with the mechanical properties and functional response of NiTi shape memory alloy manufactured by electron beam freeform fabrication

Study on the NiTi Shape Memory Alloys In-Situ Synthesized by Dual-Wire-feed Electron Beam Additive Manufacturing

In-situ Synthesis of NiTi Shape Memory Alloys with Tunable Chemical Composition and Thermomechanical Response by Dual-Wire-feed Electron Beam Directed Energy Deposition

Effect of heat treatment on microstructure and functional properties of additively manufactured NiTi shape memory alloys

MECHANICAL PROPERTIES OF NiTi SHAPE MEMORY THIN FILMS

In-situ alloying of NiTiNb ternary shape memory alloys via laser powder bed fusion using pre-alloyed NiTi and elemental Nb powders: Microstructure, phase transformation behavior and functional properties

Additively manufacturing-enabled hierarchical NiTi-based shape memory alloys with high strength and toughness

Electron beam freeform fabrication of NiTi shape memory alloys: Crystallography, martensitic transformation, and functional response

Microstructure Analysis and Thermal Characteristics of NiTiHf Shape Memory Alloy with Different Composition

Toward additive manufactured crack-free NiTiCu shape memory alloys with low-hysteresis and tailorable phase transition behavior supported by theoretical design

Zur Biogenese des Erythromycins

Effect of solution treatment on the microstructure, phase transformation behaviour and functional properties of NiTiNb ternary shape memory alloys fabricated via laser powder bed fusion in-situ alloying

Microstructure and properties of NiTi shape memory alloy fabricated by double-wire plasma arc additive manufacturing with a nearly equal atomic ratio

Microstructures and mechanical properties of NiTi shape memory alloys fabricated by wire arc additive manufacturing

TiNi-Based Bi-Metallic Shape-Memory Alloy by Laser-Directed Energy Deposition

Endowing Low Fatigue for Elastocaloric Effect by Refined Hierarchical Microcomposite in Additive Manufactured NiTiCuCo Alloy

Tailoring of microstructure and shape memory properties of hot-forged NiTiNb alloy by multi-pass ECAP at high temperatures

Fatigue-Resistant Heterogeneous Gradient Nanocrystalline NiTi Shape Memory Alloy Fabricated by Pre-Strain Laser Shock Peening