Abstract:In the development of advanced steel, accurate and detailed knowledge about the kinetics of phase transformations and microstructure formation is critical. The critical issue in pearlite-austenite transformation is the consideration of diffusional paths of the alloy element. Simulation has been an available method to study the diffusion of alloy elements and the migration rate of the phase boundary in the complex morphological evolution of austenite growth. The isothermal pearlite-austenite transformations at 720 and 740 degrees C in Fe-0.6%C-2%Mn (mass fraction) alloy were studied by phase-field methods based on MICRESS. At different temperatures, the effects of diffusional paths on the austenite transformation were discussed. To achieve a semiquantitative verification of the simulated results, the migration rates of the austenite/pearlite boundary at 720 and 740 degrees C were estimated from the experimental kinetics curves by fitting the JMA equation. By measuring the Mn profile in austenite, the modes of the austenization at 720 and 740 degrees C can be verified as partitioned local equilibrium (PLE) and non-partitioned local equilibrium (NPLE) modes. The heterogeneous distribution of Mn in austenite at 740 degrees C can be observed with STEM-EDS. However, the homogenous distribution of Mn can be found near the pearlite/austenite boundary in austenite at 720 degrees C. The cases considering the gamma, alpha, and interface-diffusional paths were simulated by phase-field methods to compare with the migration rates of the austenite/pearlite boundary. Because carbon is an interstitial element in steel and has an interstitial diffusional mechanism, it can be speculated reasonably that the diffusion of C mainly proceeded in austenite and ferrite through the considerations of the atom-size of carbon and the experimental results. Phase-field methods were used to study Mn diffusion in the lamellar pearlite-austenite transformation. With the analysis of the experimental estimations, the interface-diffusional path was observed as the dominant path for the Mn diffusion. It is because the Mn atoms have greater diffusivity in interfaces than in gamma or alpha-diffusional paths. Furthermore, the diffusional activation energy is closely related to the diffusivity of Mn at the interface. Moreover, compared with the gamma-diffusional path, the diffusional flux of Mn in ferrite is much larger than that in austenite. Thus, it can be concluded that the contribution of the alpha-diffusional path to the migration rate of the pearlite/austenite boundary is larger than that of the gamma-diffusional path. As a result, considering the alpha-diffusional path in the thermodynamics analysis under NPLE mode makes more sense. However, ignoring the interface- and alpha-diffusional path, which is different from the traditional cognition in PLE mode, will result in a magnitude error for the thermodynamics analysis.

The Expanded Lever Rule on the Phase Transformation Rate Curve for Phase Volume Fraction Calculation in Thermal Simulations

Phase Field Simulation for Non-Isothermal Solidification of Multicomponent Alloys Coupled with Thermodynamics Database

Phase Field Simulation of Liquid-Solid-eutectoid Multiple Phase Transformations of a Fe-C Binary Alloy

A Multi-Phase Model for Transformation Plasticity Using Thermodynamics-Based Metallurgical Algorithm

Phase Field Simulation of Multiple Phase Transformation of Fe-C Alloy During Solidification Process

Application of the Thermodynamic Extremal Principle to Diffusion-Controlled Phase Transformations in Fe-C-X Alloys: Modeling and Applications

Phase Field Study of the Diffusional Paths in Pearlite-Austenite Transformation

Simulation of lamellar pearlite growth morphology with phase-field method

Prediction and experimental verification of phase transformation plasticity

Conversional model of transformation strain to phase fraction in low alloy steels

A Parameterized Leblond-Devaux Equation for Predicting Phase Evolution during Welding E36 and E36Nb Marine Steels

Phase-field investigation on the peritectic transition in Fe-C system

Towards the ab initio based theory of the phase transformations in iron and steel

Progress in Effect of Alloying Element Partition on Thermodynamics and Kinetics of Pearlite Transformation and Its Austenitization

CFD-DEM-VOF-phase diagram modelling of multi-phase flow with phase changes

Thermodynamic Investigation of New High-Strength Low-Alloy Steels with Heusler Phase Strengthening for Welding and Additive Manufacturing: High-Throughput CALPHAD Calculations and Key Experiments for Database Verification

Development of computational framework for titanium alloy phase transformation prediction in laser powder-bed fusion additive manufacturing

Austenite/Ferrite Interface Migration and Alloying Elements Partitioning: an Overview

The Generalized Additivity Rule for Thermal Path-Dependent Diffusion-Controlled Phase Transformation by Simultaneous Nucleation and Growth and Its Mathematical Solutions

Recent research progress on the phase-field model of microstructural evolution during metal solidification

Modification on the Volume Fraction Formulae of A Sort of Phase Transformations