Abstract:Herein, an effective electrochemical activation strategy is designed to enhance the overall energy storage performance of copper-based (Cu-based) nickel–cobalt hydroxide (NiCo–OH). The long-term cyclic voltammetry (CV) cycling process in an alkaline electrolyte triggered the in situ transformation from Cu-doped NiCo–OH (Cu/NiCo–OH) to electrochemically activated CuO-doped NiCo–OH (EA-CuO/NiCo–OH) on a porous Cu foam (CF) substrate, together with the significantly increased charge storage capacity. Benefiting from fast electron/ion transfer, abundant surface defects, and powerful synergistic effect contributed by the unique self-supported heterostructure, the EA-CuO/NiCo–OH electrode can achieve a high areal capacity of 4.186 C cm–2 under 5 mA cm–2, with excellent rate performance (67.5% of initial capacity under 50 mA cm–2) and long life span (84.8% of initial capacity after 5000 cycles). The as-fabricated EA-CuO/NiCo–OH//AC hybrid supercapacitor device shows a maximum energy density of 0.648 mW h cm–2 and an outstanding cycling stability (93.4% of initial capacity after 8000 cycles). The superior energy storage performance underpins the high potential of the reported electrochemical activation strategy for developing advanced Cu-based and bimetallic hydroxide-derived electrode materials.The Supporting Information is available free of charge at https://pubs.acs.org/doi/10.1021/acsaem.1c01662.Experimental section; contact angle measurements of the CF and Cu(OH)2 electrodes; CV curves of CF, Cu(OH)2, Cu/Ni–OH, and Cu/Co–OH after different cycles; XRD patterns and SEM images of NiCo–OH, Ni–OH, and Co–OH powders; absolute values of charges stored on the Ni–OH, Co–OH, and NiCo–OH electrodes after different cycles; CV curves of NiCo–OH, Ni–OH, and Co–OH after different cycles; SEM images of CF, Cu(OH)2, Cu/NiCo–OH, Cu/Ni–OH, and Cu/Co–OH after different CV cycles; EDX spectra of Cu/NiCo–OH and EA-CuO/NiCo–OH; XPS surface atomic ratio variation of Cu/NiCo–OH after different cycles; XRD patterns of CF, Cu(OH)2, EA-CuO (CF), EA-CuO (Cu(OH)2), NiCo–OH powder, and Cu/NiCo–OH scraped from the CF substrate; survey scan XPS spectra of Cu/NiCo–OH and EA-CuO/NiCo–OH; ex situ Cu 2p3/2 XPS spectra of Cu/NiCo–OH after different CV cycles; Cu LM2 spectra of Cu/NiCo–OH and EA-CuO/NiCo–OH; ex situ Ni 2p and Co 2p XPS spectra of Cu/NiCo–OH after different CV cycles; comparison of CV curves for the EA-CuO (CF), EA-CuO (Cu(OH)2), EA-CuO/Co–OH, EA-CuO/Ni–OH, and EA-CuO/NiCo–OH electrodes; CV and GCD curves of the EA-CuO (CF), EA-CuO (Cu(OH)2), EA-CuO/Ni–OH, and EA-CuO/Co–OH electrodes; survey scan, Cu 2p, Ni 2p, and Co 2p XPS spectra of the EA-CuO/NiCo–OH electrode before and after the cycling test; comparison of CV curves for the EA-CuO/NiCo–OH and AC electrodes; CV curves, GCD curves, and rate performance of the AC electrode; equivalent circuit parameters of the Cu/NiCo–OH electrode after different cycles; comparison of areal capacities for various electrodes in a three-electrode configuration; and comparison of energy density (E) versus power density (P) for different devices (PDF)This article has not yet been cited by other publications.

Understanding the Electrochemical Activation Behavior of Co(Oh)(2) Nanotubes During the Ion-Exchange Process

Activation Mechanism Study of Dandelion-Like Co9s8 Nanotubes in Supercapacitors

Controlled Preparation of CoNi2S4 Nanorods Derived from MOF-74 Nanoarrays Involving an Exchange Reaction for High Energy Density Supercapacitors.

Unveiling the Dynamic Capacitive Storage Mechanism of Co3O4 @nico2o4 Hybrid Nanoelectrodes for Supercapacitor Applications

Hydrothermal Synthesis of Cobalt Sulfide Nanotubes: the Size Control and Its Application in Supercapacitors

Co-Ni Basic Carbonate Nanowire/Carbon Nanotube Network With High Electrochemical Capacitive Performance via Electrochemical Conversion

In Situ Growth of Nico2s4 Nanotube Arrays on Ni Foam for Supercapacitors: Maximizing Utilization Efficiency at High Mass Loading to Achieve Ultrahigh Areal Pseudocapacitance

In situ growth of nickel-cobalt oxyhydroxide/oxide on carbon nanotubes for high performance supercapacitors

Tailoring activation of CoNiO nanoparticles/porous carbon nanofibers by atomic doping for high performance supercapacitors

KOH-activated CoO Mesoporous Nanoarrays for Boosted Supercapacitive Performance

Synthesis and Formation Mechanism of Cobalt Compound Nanotubes

Electroconversion synthesis of Ni/Co layered nanomaterials for high-performance supercapacitors

Synthesis of Co(OH)2/graphene/Ni Foam Nano-Electrodes with Excellent Pseudocapacitive Behavior and High Cycling Stability for Supercapacitors

Sn doping role in structural modifications and electrochemical performance of Co(OH) 2 nanorods for supercapacitors applications

Synthesis of Co3O4@CoMoO4 Core–shell Architectures Nanocomposites As High-Performance Supercapacitor Electrode

An Ingenious Strategy to Integrate Multiple Electrocatalytically Active Components within a Well-Aligned Nitrogen-Doped Carbon Nanotube Array Electrode for Electrocatalysis

Electrochemical conversion of Ni2(OH)2CO3 into Ni(OH)2 hierarchical nanostructures loaded on a carbon nanotube paper with high electrochemical energy storage performance

Hierarchical nanostructures of Co(OH) 2 on electrospun NiMoO 4 nanofibers: Controllable hydrothermal-fabrication and enhanced supercapacitor performance

N-doped Bamboo-Like Carbon Nanotubes Loading Co As Ideal Electrode Material Towards Superior Catalysis Performance

Co₃O₄@CoS Core-Shell Nanosheets on Carbon Cloth for High Performance Supercapacitor Electrodes

In Situ Growth and Electrochemical Activation of Copper-Based Nickel–Cobalt Hydroxide for High-Performance Energy Storage Devices