Abstract:Conventional methods for hot extrusion of magnesium (Mg) alloy sheets have limitations for microstructure improvement and mechanical property enhancement. Co-extrusion of Mg alloy with an Al alloy core provides an opportunity for refining the grain size and improving basal texture. This study introduces a novel severe plastic deformation (SPD) method, Direct Extrusion-Continuous Shear (DE-CS), utilizing 6063 Al alloy as the core to fabricate innovative Mg/Al clad composite sheets. Monolithic Mg sheets (non-co-extruded condition) are extruded under identical conditions for comparison. By evaluating the microstructure and mechanical properties of AZ31 Mg alloy under co-extrusion and non-co-extrusion conditions, the positive effect of Mg-Al composite billet co-extrusion on AZ31 Mg alloy is established. The grain refinement effect in co-extruded samples is superior, enhancing plasticity without significant reduction in tensile strength. The microstructure evolution and dynamic recrystallization (DRX) behaviour of AZ31 Mg alloy during co-extrusion were analyzed comprehensively. The results indicate that, in the initial stages of deformation, various variants of {10-12} extension twins (ETs) play a crucial role in refining the original grains, forming initial [10-10]//ED fiber texture components alongside other non-basal components. Upon entering the shear deformation (SD) zone, deformed twins disappear, and small dynamically recrystallized (DRXed) grains emerge along boundaries of coarse deformation grains and within the grains. Strong shear deformations and compressive stress from transverse direction (TD) induce intensified prismatic and pyramidal slip, promoting continuous dynamic recrystallization (CDRX) and discontinuous dynamic recrystallization (DDRX). CDRX predominantly affects elongated deformed grains, forming an [10-10]//ED fiber texture through high-energy grain boundary segmentation. Subsequently, compatible stress increases due to the activity of non-basal slip dislocation and the reduction in grain boundary (GB) size. DDRX emerges as the dominant mechanism, generating randomized [10-10]//ED fiber and non-fiber textures within parent grains and at boundaries.

Influence of an Asymmetric Shear Deformation on Microstructure Evolution and Mechanical Behavior of AZ31 Magnesium Alloy Sheet

Microstructure and Mechanical Behaviour of Asymmetric Extruded Mg–3Al–1Zn Alloy Sheets

A Tilted Weak Texture Processed by an Asymmetric Extrusion for Magnesium Alloy Sheets

Influence of Different Extrusion Processes on Mechanical Properties of Magnesium Alloy

Effect of Extrusion Strain Path on Microstructure and Properties of AZ31 Magnesium Alloy Sheet

Mechanical Behavior and Microstructure Evolution for Extruded AZ31 Sheet under Side Direction Strain

A novel continues multi-shear extrusion process on the microstructure and mechanical property evolution of AZ31 magnesium alloys

Effect of Effective Strain Gradient on Texture and Mechanical Properties of Mg–3Al–1Zn Alloy Sheets Produced by Asymmetric Extrusion

Ameliorating the Mechanical Properties of Magnesium Alloy: Role of Texture

Tailoring the Textures and Mechanical Properties of AZ31 Alloy Sheets Using Asymmetric Composite Extrusion

Microstructure evolution and mechanical response of extruded AZ31B magnesium alloy sheet at large strains followed by annealing treatment

Effect of Extrusion-Sheer on the Microstructure and Mechanical Properties of Magnesium Alloy AZ31

Improving the Microstructure and Mechanical Properties of Magnesium-Alloy Sheets with a New Extrusion Method

Deformation behaviour, microstructure evolution and dynamic recrystallization mechanism of AZ31 magnesium alloy under co-extruded by Mg-Al composite billet

Influences of Shear Angles on Microstructures and Compression Properties of AZ31 Mg Alloy Prepared by Extrusion-Shear Process

Mechanical Properties and Anisotropy of AZ31 Alloy Sheet Processed by Flat Extrusion Container

Influence of Microstructural Evolution on Mechanical Behaviour of Az31 Alloy Sheet Processed by Flat Extrusion Container

Effect of Processing Variables on Microstructure and Mechanical Properties of AZ31B Magnesium Alloy Sheet

Microstructure and Texture Evolution of AZ31 Magnesium Alloy Processed by Extrusion-shear Technique

An Investigation on Microstructure, Texture and Formability of AZ31 Sheet Processed by Asymmetric Porthole Die Extrusion

The Influences of Extrusion-Shear Process on Microstructures Evolution and Mechanical Properties of AZ31 Magnesium Alloy