Abstract:As a particular method for the preparation of metal-nanowire-based transparent conducting films (TCFs), electrospinning has some advantages that common methods don't possess, such as a low requirement for the match of substrate, no coffee rings and the ability of preparing films on curved or rugged substrates. However, at present, complex preparation procedures or high temperature treatment are usually needed to prevent electrospinning polymers from affecting the performance of TCFs. To solve this problem, polymers that are suitable for direct electrospinning with metal nanowires and can be easily eliminated under mild conditions are desirable. However, this type of polymer has been rarely reported. In this study, silver nanowires (AgNWs) were selected as the representative of metal nanowires and different polymers were tried to discover the most suitable material. The results of the experiments indicated that polyethylene oxide (PEO) (M-w = 50 000) was the most suitable polymer. The chain length of this polymer was enough to effectively wrap the AgNWs to obtain good electrospinning films and it could be easily eliminated under mild conditions because of its low melting point and excellent solubility. Then, we determined the most suitable electrospinning solution, which consists of AgNWs (0.3%), PEO (2.5%), AMP (0.2%) and DI water (97%). From this solution, uniform electrospinning films were prepared. Subsequently, this film was heated at 70 degrees C for 15 s to fasten the AgNWs onto the substrate and then soaked in ethanol (70 degrees C) for 10 s to eliminate PEO, in sequence. Finally, a good TCF was obtained. The sheet resistance and transmittance of this film were 94 Omega sq(-1) and 83.4%, respectively.

Fabrication of Ag Nanowire/Polymer Composite Nanocables Via Direct Electrospinning

Direct Electrospinning of Ag/polyvinylpyrrolidone Nanocables.

Fabrication and Characterization of Ag@C Nanocables with High Aspect Ratios by Hydrothermal Process

Preparation of Poly(Vinyl Alcohol) Core/Sheath Micro/Nano Composite Fibers Containing Silver Nanowires

Polyacrylonitrile/silver nanowire nanofiber yarn for personal thermal management

Large-scale fabrication of Ag nanoparticles in PVP nanofibres and net-like silver nanofibre films by electrospinning.

Centrifugal Spinning Enables the Formation of Silver Microfibers with Nanostructures

Silver Nanowires Eelectrodeposited from Reverse Hexagonal Liquid Crystals

High-Strength and Conductive Electrospun Nanofiber Yarns

Electrostatic Forces Induce Poly(vinyl alcohol)-Protected Copper Nanoparticles to Form Copper/Poly(vinyl alcohol) Nanocables via Electrospinning

Large-Scale Spinning of Silver Nanofibers As Flexible and Reliable Conductors

Fabrication of novel Ag nanowires/ applications and mate poly(vinylidene fluoride) nanocomposite film with high dielectric constant

Continuous Draw Spinning of Extra-Long Silver Submicron Fibers with Micrometer Patterning Capability

Fabrication of electrically bistable nanofibers.

Fabrication of Embedded Silver Nanowires on Arbitrary Substrates with Enhanced Stability Via Chemisorbed Alkanethiolate.

Fabrication of highly conductive silver nanowires flexible conductor based on polydopamine-modified goose down network

An efficient polymer for producing electrospun transparent conducting films through simple procedures and a mild post-process

Direct Room Temperature Welding and Chemical Protection of Silver Nanowire Thin Films for High Performance Transparent Conductors

Electrospinning of Ag Nanowires/polyvinyl Alcohol Hybrid Nanofibers for Their Antibacterial Properties

Efficient Welding of Silver Nanowires embedded in a Poly(vinylidene fluoride) Film for Robust Wearable Electronics

Fabrication of Poly(vinylidenefluoride‐co‐hexafluoropropylene) Nanofiber Yarns by Conjugate Electrospinning