Abstract:Synthesis methods of composites. Copper‐based metal–organic frameworks is anticipated to find applications in the field of friction materials owing to its plentiful surface‐active groups and distinctive framework structure. In this study, copper‐based metal–organic frameworks was synthesized through ultrasound‐assisted method and incorporated alone into carbon fiber reinforced epoxy composites or together with SiO2 nanoparticles towards the goal of improving the composites' friction and wear properties. It is revealed that copper‐based metal–organic frameworks alone cannot improve the friction and wear of carbon fiber reinforced epoxy composites simultaneously. The combination of copper‐based metal–organic frameworks and SiO2 nanoparticles was more effective in enhancing both the mechanical and tribological properties of studied composites. The composite material exhibits a friction coefficient of 0.104 under the specified test conditions of 10 MPa and 3.75 m/s. Additionally, the specific wear rate is impressively low, measuring only 5.64 × 10−7 mm3 N/m. Through morphological and chemical analysis on the worn surfaces and transfer films, the functioning mechanism of copper‐based metal–organic frameworks in modifying the mechanical and tribological properties was discussed. It was discovered that a tribological synergy exists between short carbon fibers, copper‐based metal–organic frameworks, and SiO2 fillers, leading to a shift in the wear mechanism of the composite materials from abrasive wear to adhesive wear. Concurrently, a shear‐prone transfer film forms on the surface of the counter steel surfaces. Findings of the present study pave a new route of designing high performance epoxy based tribo‐composites by using metal–organic frameworks. Highlights Cu‐BDC nanosheets were synthesized using ultrasound‐assisted techniques and incorporated as tribological fillers in EP composites. The combined use of Cu‐BDC, SiO2, and SCF fillers synergistically enhances the mechanical and tribological properties of EP composites. The composite material exhibits a friction coefficient of 0.104 under the specified test conditions of 10 MPa and 3.75 m/s, the specific wear rate is impressively low, measuring only 5.64 × 10−7 mm3N/m. During the sliding friction process of the composite materials, Cu‐BDC and SiO2 play a crucial role in reducing SCF pull‐out wear through their anchoring effect. The dynamic coordination bond structure of Cu‐BDC contributes to the formation of uniform and continuous transfer films on counter metal surfaces.

Effects of emulsified asphalt on the mechanical and tribological properties of copper/graphite composites

Application Of Epoxy-Asphalt Composite In Asphalt Paving Industry: A Review With Emphasis On Physicochemical Properties And Pavement Performances

Enhancement of Rheological Performance and Compatibility of Tire Rubber-Modified Asphalt Binder with the Addition of Graphene

Effect of Steel Wool and Graphite on the Electrical Conductivity and Pavement Properties of Asphalt Mixture

Effect of Purity and Proportion of Microcrystalline Graphite Ore on the Electrical, Mechanical and Tribological Performance of Copper-Carbon Composites

Enhanced mechanical and tribological properties of copper matrix composites reinforced by copper-coated graphite and Ti3AlC2

Superior mechanical properties and wear resistance of copper/graphite metallic composites fabricated with fibrous copper powder

Phase-separated Microstructures and Viscosity-Time Behavior of Graphene Nanoplatelet Modified Warm-Mix Epoxy Asphalt Binders

Characterization and Tribological Properties of Graphene/Copper Composites Fabricated by Electroless Plating and Powder Metallurgy

Role of Cr-carbide Coating on Graphite Particles in the Mechanical and Wear Behavior of Graphite/Copper Composites

Tribological properties of copper-graphene (CuG) composite fabricated by accumulative roll bonding

Tribological behaviors of graphite/epoxy two-phase composite coatings

Preparation and Electrical Properties of Conductive Asphalt Concretes Containing Graphene and Carbon Fibers

Epoxy-ended hyperbranched polymer-grafted graphene oxide for cold-mixed epoxy asphalt modification

Viscosity‐curing Time Behavior, Viscoelastic Properties, and Phase Separation of Graphene Oxide/epoxy Asphalt Composites

Effect of adding copper-plated graphite on the organization and wear reduction of copper-nickel alloy composite coatings

Tribological synergy of copper‐based metal–organic frameworks, carbon fibers and SiO2 in modifying the friction and wear properties of epoxy composites

Influence of Polyethyleneimine Functionalized Graphene on Tribological Behavior of Epoxy Composite

Research on compatibility mechanism of biobased cold-mixed epoxy asphalt binder

Effect of lubricant functional groups on tribological properties of epoxy/graphene composites

Road Performance and Emission Reduction Effect of Graphene/Tourmaline-Composite-Modified Asphalt