Abstract:The interfacial compatibility plays an important role in the performance of fiber-reinforced composite laminates. Aramid fiber is an important class of high performances fibers. However, the inertia of fiber surface is not conducive to the improvement of composite properties. In this work, polyarylene ether nitrile terminated with phthalonitrile (PEN-t-Ph) was supplied to modify the aramid fiber (m-AF). By heat treatment and riveting PEN-tPh to the fiber surface, a rough fiber surface can be obtained, and then the composite material with improved performance can be obtained through the entangling compatibility. Through SEM images, it could be seen that the fiber surface had the best rivet surface morphology when the fiber surface coated with 5 wt% PEN-t-Ph (m(5 wt%)-AF). At the same time, the interfacial adhesion between m(5 wt%)-AF and the resin matrix showed the best peel strength of 1.594 kN/m. Based on these results, modified fiber resin composite laminates (m(5 wt%)-AF/ PEN-t-Ph) were fabricated. The results indicated that the laminates had good interfacial compatibility and the interlaminar shear strength (ILSS) of modified aramid fiber laminates was 112.58 MPa, which is increased by 21.4% than that of original fiber composite laminates. In addition, the flexural strength of m-AF/PEN-t-Ph laminates was 324 MPa, increased by 10% compared to AF/PEN-t-Ph. The results of DMA showed that the energy storage modulus of the m-AF/PEN-t-Ph laminate was greatly improved compared with that of AF/PEN-t-Ph laminate, which was increased by 60% under the initial condition of 100 C. To sum up, through surface treatment, the mechanical properties of fiber-reinforced composite laminates had been greatly improved, making them have great application prospects in bulletproof and other fields.

Surface modification mechanism of aramid fiber by AACH nanowire recasting and its enhanced modification of TPU

Enhancement of Para-Aramid Fibers by Depositing Poly-P-paraphenylene Terephthalamide Oligomer Modified Multi-Walled Carbon Nanotubes

Surface modification of aramid fiber by crystalline polyarylene ether nitrile sizing for improving interfacial adhesion with polyarylene ether nitrile

A Novel Surface Modification of Carbon Fiber for High-Performance Thermoplastic Polyurethane Composites

Surface Modification of Aramid Fibers by Amino Functionalized Silane Grafting to Improve Interfacial Property of Aramid Fibers Reinforced Composite

Improvement of the Mechanical Properties by Surface Modification of ZnCl2 and Polydopamine in Aramid Fiber Composites

Non-destructive modification of aramid fiber by building nanoscale-coating solution to enhance the interfacial adhesion properties of the fiber-reinforced composites

Fire safety improvement of para-aramid fiber in thermoplastic polyurethane elastomer

Influence of Polyamide Acid Coating Reaction on the Properties of Aramid Fibre

Surface Modification of Carbon Fibers by Grafting PEEK-NH2 for Improving Interfacial Adhesion with Polyetheretherketone

Improving the Mechanical and Surface Properties of Aramid Fiber by Grafting with 1,4-Dichlorobutane under Supercritical Carbon Dioxide

Effects of aramid nanofibers on the mechanical properties of epoxy resin and improved adhesion with aramid fiber

Enhanced interfacial adhesion of aramid fiber reinforced rubber composites through bio‐inspired surface modification and aramid nanofiber coating

Surface Modification of Aramid Fibers by Catechol/Polyamine Codeposition Followed by Silane Grafting for Enhanced Interfacial Adhesion to Rubber Matrix

Preparation of highly active aramid fiber and effect on the interface property of aramid/epoxy composites

Chemical modification of carbon fiber with diethylenetriaminepentaacetic acid/halloysite nanotube as a multifunctional interfacial reinforcement for silicone resin composites

Highly efficient mussel-like inspired modification of aramid fibers by UV-accelerated catechol/polyamine deposition followed chemical grafting for high-performance polymer composites

Surface modification of nylon 66 fiber and its reinforcement of coordination crosslinked acrylic rubber

Influence of Supercritical Carbon Dioxide-Assisted Polyamide Acid Modification of Aramid Fibers on the Properties of Aramid Fiber-Reinforced Styrene Butadiene Rubber

Foaming behavior of polyamide 1212 elastomers/polyurethane composites with improved melt strength and interfacial compatibility via chain extension

Surface modification of carbon fiber as a protective strategy against thermal degradation