Abstract:The results of studies on thermodynamics of martensitic transformation in Fe-C and Fe-X-C alloys lead the Ms temperature in structural steels to be predicted. Establishing thermodynamics of martensitic transformation in Cu- and Fe-Mn-Si based alloys built the basis of composition and processing design for Cu- and Fe- based shape memory alloys. The thermodynamic approach for calculation of Ms in ZrO2 containing ceramics and corrected formula expressing the effect of parent grain size on Ms were suggested. The revised kinetics equation of a thermal martensitic transformation shows that alloying element varying the diffusion coefficient of carbon in low-carbon steels would affect the amount of the retained austenite and it will be beneficial for the exploitation of steels with microstructure of lath martensite. Research on the isothermal kinetics of the retained austenite→martensite in GCrl5 ball bearing (AISI 52 100) steel indicates that the dimensional stability (as comparison to specimen treated by traditioinal quenching and tempering) increases 34％ in specimen treated by an isothermal holding in order to form a few percent of isothermal martensite from the retained austenite after quenching and followed by normal tempering and the contact fatigue life is not reduced. Studies of characteristics of martensitic transformations and their reverse transformations in Ni-Ti, Cu-Zn-Al, Fe-Mn-Si based alloys and ZrO2 containing ceramics reveal the factors affecting the shape memory effect (SME) and indicate the way to improve the SME as well as the exploitation of these materials. Thermodynamics study of bainitic transformation, observation of the growth ledge, studies on the effect of parent strengthening on transformations and the results of internal friction measurements all display that the bainite formation is controlled by diffusion. Addition of alloying elements hindering the diffusion of Zn and Al in Cu-Zn-Al may improve the SME and its service life. There exists the hainitic transformatioin in CeO2-ZrO2 and it relates to the appearance of brittleness in ZrO2 containing ceramics. Research on the ordering of β phase in Cu-Zn is significant for the application of alloy with ordered phase. The presentation of the criterion of spinodal decomposition in ternary alloys may be valuable for the development of alloys exhibiting high damping capacity or high strength by means of spinodal decomposition. Group theory is successfully utilized in crystallography of phase transformation. The required condition for the appearance of crystallography reversibility derived from group theory is the formation of single variant martensite. It seems effective that the soliton is introduced in the nucleation and growth model in phase transformation.

Phase Transformations Induced by Mechanical Alloying in Binary Systems

Mechanism of Amorphous Phase Synthesized by Mechanical Alloying

Study on Phase Transformation and Thermodynamic and Kinetic of Al-Pb Powder During Mechanical Alloying

Studies on thermodynamic and kinetic and phase evolution of W-Ni-Fe powder during mechanical alloying

Calorimetric Evidence for Polymorphous Constraints on Metastable Zr-Al Phase Formation by Mechanical Alloying

Amorphization in the AlC System by Mechanical Alloying

Formation of Crystalline and Amorphous Solid Solutions of W–Ni–Fe Powder During Mechanical Alloying

Mechanical Alloying of the Immiscible Cu-60wt%Cr Alloy: Phase Transitions, Microstructure, and Thermodynamic Characteristics

Amorphization of Zr–Al Solid Solutions under Mechanical Alloying at Different Temperatures

Amorphization Of Zr-Al Under Mechanical Alloying At Different Temperatures: A Re-Entrant Melting Phenomenon

Phase Transformation in Al/Zn Multilayers during Mechanical Alloying

Formation of nanocrystalline and amorphous phase of Al-Pb-Si-Sn-Cu powder during mechanical alloying

Mechanical Alloying of Immiscible Metallic Systems: Process, Microstructure, and Mechanism

Mechanical Alloying as a Way to Produce Metastable Single-Phase High-Entropy Alloys beyond the Stability Criteria

Investigation on mechanical alloying assisted by external fields

Structural Transformations in Medium- and High-Entropy Alloy Systems in Course of High-Energy Ball Milling

Mechanical milling/alloying of intermetallics

Modifying Transformation Pathways in High Entropy Alloys or Complex Concentrated Alloys Via Thermo-Mechanical Processing

Studies on Phase Transformations and Their Applications in Materials Engineering

Metastable alloys synthesised by ion mixing and thermodynamic and kinetic modelling

Phase-transition assisted mechanical behavior of TiZrHfTa x high-entropy alloys