Abstract:The technique of micro-pillar compression testing is quickly becoming a new paradigm for small-scale mechanical testing (1). In particular, micro-pillar compression testing is an effective technique for examining size effects at small length scales and investigating materials that are difficult to make in bulk quantities. Through quantitative in situ nano-compression tests in a transmission electron microscope (TEM) we can directly correlate the dynamic deformation mechanisms in submicron pillars with simultaneous measurement of the imposed stresses. This talk will demonstrate this capability through the in situ compression of focused ion beam (FIB) machined metallic pillars with diameters between 150 and 400 nanometers. In pure, single crystal Ni pillars, the phenomenon of source-limited deformation is evident where plasticity is derived from single or very few active slip systems(2). In a second example we have systematically investigated two AA6063 alloys with identical compositions, one as-extruded and the other heat-treated to increase the solute concentrations in the matrix. In the annealed AA6063 pillars, the deformation is more complicated and cross-slip can result in a three-dimensional dislocation network that leads to a rotation of the pillar structure under compression. We also found that the annealed sample exhibited a higher yield stress and greater deformability as compared to the as-extruded sample, similar to data from bulk mechanical tests of the same alloys. Furthermore, our dynamic observations and comparison of the two alloys demonstrate that the dislocation plasticity behavior is quite different for the two samples. Our results will show that the nanoscale plasticity behavior seen during in situ deformation relates directly to the bulk ductility of these alloys. All of these results will be shown in relation to the size effects seen in ex situ pillar compression tests where a direct relationship between the yield stress and the diameter of pillar structures has been observed.

Plastic Deformation of Submicron-Sized Crystals Studied by In-Situ Kikuchi Diffraction and Dislocation Imaging

In-Situ Tem Compression of Submicron-Sized Single Crystal Copper Pillars

Microstructure evolution of compressed micropillars investigated by in situ HR-EBSD analysis and dislocation density simulations

High Strain Gradient Plasticity Associated with Wedge Indentation into Face-Centered Cubic Single Crystals: Geometrically Necessary Dislocation Densities

A Micropillar Compression Simulation by A Multiscale Plastic Model Based on 3-D Discrete Dislocation Dynamics

A fundamental understanding of how dislocation densities affect strain hardening behavior in copper single crystalline micropillars

Numerical Study of the Size-Dependent Deformation Morphology in Micropillar Compressions by a Dislocation-Based Crystal Plasticity Model

Analysis of Stress and Deformation States in Wedge Indented Face-Centered Cubic Single Crystals

A Dislocation-Based Crystal Plasticity Model for Single-Crystal Micropillars Based on Strain Burst with Stochastic Characteristics

Surface-controlled dislocation multiplication in metal micropillars

Crystalline Plasticity On Copper (001), (110), And (111) Surfaces During Nanoindentation

In Situ TEM Investigation of the Mechanical Behavior of Micronanoscaled Metal Pillars

Probing microplasticity in small scale FCC crystals via Dynamic Mechanical Analysis

Stacking Fault and Plastic Deformation Mechanism in Nano‐twinned Cu Pillar under Ultrahigh Stress

Transition from Homogeneous-Like to Shear-Band Deformation in Nanolayered Crystalline Cu/amorphous Cu–Zr Micropillars: Intrinsic Vs. Extrinsic Size Effect

Anisotropic Size-Dependent Plasticity in Face-Centered Cubic Micropillars under Torsion

In Situ High Resolution Transmission Electron Microscopy Investigation of Deformation Mechanism in Sub-10-nm Au Crystals

Emergence of external size effects in the bulk-scale polycrystal to small-scale single-crystal transition: A maximum in the strength and strain-rate sensitivity of multicrystalline Cu micropillars

A continuum model for intermittent deformation of single crystal micropillars

Nanoscale compression testing inside a TEM

Micropillar compression of single crystal tungsten carbide, part 2: Lattice rotation axis to identify deformation slip mechanisms