Abstract:Hot forming is the advanced technology that integrates traditional heat treatment and cold stamping. The ultra high strength component with the tensile strength 1600 MPa can be manufactured by hot forming. The principle of hot forming,one-step method and multi-step method technology,the key manufacturing technology in hot forming process are introduced.The evolutions of microstructure and mechanical property of the material are analyzed before hot forming,in hot forming and after hot forming.The material model of austenitic phase at high temperature with dependence on temperature and strain rate and its application method in hot forming are presented.The formability of the material in hot forming is studied.The influence of hardness ability value on formability is investigated and the optimized temperature range is presented.The anisotropy of the rolling direction is analyzed and the experimental results indicate the anisotropy of crystal lattice disappear in hot forming.The constitutive relations of the material are descripted in hot forming,especially the thermal-mechanical-transformation coupled relationship.The multi-phase mixed relationship is introduced to analyze the effective thermo-mechanical parameters and mechanical properties of multi phases during the hot forming.By defining the concepts,the phase-transformation volume stress and phase-transformation plastic stress are expressed to explain the mechanism of thermal-mechanical-transformation coupled relations.Then the numerical simulation of hot forming is introduced,especially the dynamic explicit algorithm,the static explicit algorithm and the numerical simulation of the temperature field based on the independently developed commercial CAE software for sheet metal forming,named KMAS(King-Mesh Analysis System).The phase transformation latent heat is introduced into the analysis of temperature field during the hot forming process. Based on the analysis of the crash problem for car body,the functional design methods of hot-forming parts used in the vehicle body design are presented.Finally prospective developments of hot forming are suggested.

Ductile Failure Analysis of High Strength Steel in Hot Forming Based on Micromechanical Damage Model

A Thermal Forming Limit Prediction Method Considering Material Damage for 22mnb5 Sheet

Parameter Calibration of GTN Damage Model and Formability Analysis of 22mnb5 in Hot Forming Process

Investigation of Mesoscopic Damage Evolution Mechanism of High Strength Steel in Hot Stamping Process

Effect of Material Damage on Thermal Forming Limit Prediction for Hot Stamping

Microstructure and Damage Based Constitutive Modelling of Hot Deformation of Titanium Alloys

Forming Limit Stress Diagram Prediction of Pure Titanium Sheet Based on GTN Model

DUCTILE DAMAGE ANALYSIS FOR FRACTURE IN SHEET METAL FORMING BASED ON GTN MESOSCOPIC DAMAGE MODEL

The finite element analysis of ductile damage during hot stamping of 22MnB5 steel

Prediction of Forming Limit of Dual-Phase 500 Steel Sheets Using the GTN Ductile Damage Model in an Innovative Hydraulic Bulging Test

On the Thermal Forming Limit Diagram (TFLD) with GTN Mesoscopic Damage Model for AA7075 Aluminum Alloy: Numerical and Experimental Investigation

DEVELOPMENT OF HOT FORMING TECHNOLOGY FOR ULTRA HIGH STRENGTH STEEL AND ITS MECHANICAL PROBLEM

Temperature Dependence of Meso Constitutive Parameters for Advanced High-Strength Steel

The GTN damage model based on Hill’48 anisotropic yield criterion and its application in sheet metal forming

Unified thermomechanical model of Ti-6Al-4V titanium alloy considering microstructure evolution and damage fracture under different stress state

Damage-coupled constitutive model of 22MnB5 steel in hot deformation

On the numerical implementation of a shear modified GTN damage model and its application to small punch test

A Damage-Coupled Unified Viscoplastic Constitutive Model for Prediction of Forming Limits of 22mnb5 at High Temperatures

A Combined Experimental and Numerical Study on the Plastic Damage in Microalloyed Q345 Steels

Behavior and modeling of flow softening and ductile damage evolution in hot forming of TA15 alloy sheets

Parameter Calibration for a Shear Modified GTN Model and Its Application to Forming Limit Prediction