Abstract:Multi-pass conventional spinning is the preferable forming technology for the forming of thin-walled conical part with curved surface (TCPCS) in aerospace field. In multi-pass conventional spinning, the design of roller path is a critical problem due to its sensitive effect on the deformation mode and forming defect during spinning process. However, at present, the roller path is still mainly designed based on experience and trial and error, which seriously restricts the high-performance spinning of TCPCS. In this work, a new quantitative method based on circumferential strain distribution was developed for the roller path design in multi-pass conventional spinning of TCPCS. In this method, the total required circumferential strain for the forming of final TCPCS by conventional spinning was firstly determined. Then, the spinning passes number was obtained through dividing the total required circumferential strain by the ultimate circumferential strain producing the spinning instability. As for the roller path profile in each pass, it is divided into two sections and determined, respectively, i.e., the attaching mandrel section and the preforming section. The attaching mandrel section presents the same profile of mandrel. The profile of preforming section is determined point by point by distributing the rest of circumferential strain to produce the final TCPCS. The point-by-point distributed circumferential strain is half of the the total required circumferential strain in the initial stage until it reaches the half of the ultimate circumferential strain, and then, it will keep the half of the ultimate circumferential strain to the end. The proposed new method of roller path design was validated by finite element simulation, where well spinning stability, wall thickness distribution and roundness were obtained. This method provides a quantitative, high-efficient and universal way for the roller path design in conventional spinning of TCPCS.

A Numerical Study of Multi-Pass Design Based on Bezier Curve in Conventional Spinning of Spherical Components

A Parametric Toolpath Design in Muti-Pass Asymmetric Spinning

A Method Based on Circumferential Strain Distribution for Roller Path Design in Conventional Spinning of Thin-Walled Conical Part with Curved Surface

Parametric Roller Path Design in Multi-Pass Conventional Spinning of Curvilinear Generatrix Parts

Numerical Simulation Study on Multi-Pass Non-Axisymmetric Spinning of Cylindrical Parts with Oblique Flange

Forming dependence on spin roller paths for thin-walled complex components from 2195 Al-Li alloy TWBs

A Numerical Study of the Effects of Roller Paths on Dimensional Precision in Die-Less Spinning of Sheet Metal

Effects of Backward Path Parameters on Formability in Conventional Spinning of Aluminum Hemispherical Parts

Numerical Investigation of Effects of Deformation Allocation on Multi-Pass Conventional Spinning Process of Curvilinear Generatrix Parts

A Study of Multi-Pass Scheduling Methods for Die-Less Spinning

Dynamic Optimization of Die-Less Spinning Process Through Autonomous Modeling of Time-Varying Forming Law

A Quasi-Dynamic Model for High-Speed Ball Spinning

The Analytical Model of Ball-Spinning Force for Processing an Annular Groove on the Inner Wall of a Steel Tube

FEA of Power Spinning of Complicated Thin-Walled Shell Based on Orthogonal Optimization

Wall Thickness Variation During Multi-Pass Spinning of Large Complicated Shell

Design of the involute trace of multi-pass conventional spinning and application in numerical simulation

Numerical Simulation Research on A New Spinning Process: Double-Roller Clamping Spinning Process

Multi-pass Spinning of Thin-Walled Tubular Part with Longitudinal Inner Ribs

Numerical Simulation and Experimental Investigation of Spinning of Hollow Part with Triangular Arc Section

Numerical Simulation of Stagger Spinning of Cylindrical Part with Cross Inner Ribs

Acceleration of sheet metal spinning simulation by multi-mesh method