Abstract:In many circumstances, the conventional ultrasonic liquid-level detection presents the unreliable estimations due to the dynamically changed liquid level. In addition, there are circumstances where the level change involves not only the fluctuation but also the rise or fall of liquid level. To improve the measuring accuracy of liquid level using the ultrasonic method in dynamically changed level case, an attractive ultrasonic method, named the liquid-level detection based on the multiple-input multiple-output ultrasonic transducer array, is proposed in this paper. This method is different from the early ultrasonic liquid-level detections, including those that utilize transducer array. Based on the virtual element technology, the method employs the multitransducer array to achieve the reduction of system complexity and cost, and then applies the synthetic aperture technology to realize rapid samples of liquid level. Besides, one adaptive searching scheme of focused position in beamforming of synthetic aperture in each scanning direction is optimized to get the high precise samples of liquid level. The proposed method is verified by simulation and a real system, and compared with the conventional single-channel approach. We still proposed a simulation method of ultrasonic echo signal from liquid level based on the boundary-layer theory and the ultrasonic scattering theory. The simulated and actual measurement results demonstrate that the proposed method is obviously superior to the conventional approach. Meanwhile, the factors influencing on the proposed method are investigated by simulation also. The investigations reveal that the focus position in beamforming, the SNR of echo signal, and the wave size of liquid level have impact on the suggested method. However, it is indicated that the good performance of the proposed method remains, provided that the focus in beamforming is properly set in every scanning direction and the noise of echo signal is effectively controlled.

Liquid-level measurement based on out-of-plane energy of Lamb waves

MmLiquid: Liquid Identification Using Mmwave.

Measurement of Particle Materials and Liquid Level

A Novel Ultrasonic Method for Liquid Level Measurement Based on the Balance of Echo Energy.

Ultrasonic liquid level detection method based on the variation of reflected energy on the inner wall of a container

Study of a novel surface acoustic wave liquid detection system

An Accurate Detection for Dynamic Liquid Level Based on MIMO Ultrasonic Transducer Array.

Liquid Level Measurement Model Outside of Closed Containers Based on Continuous Sound Wave Amplitude

An ultrasonic level measuring technique based on radiation dissipation and its industrial application

Intelligent Liquid Surface Measuring System Based on Laser Ranging

Acoustic Resonance-Based Method for Long Distance Liquid Level Detection

Liquid Level Sensing Based on Laser Differential Confocal Detectors

Highly Sensitive Liquid-Level Sensing Based on Microwave Frequency Domain Reflectometry and Interferometry

A Liquid Level Positioning System For Non-Metal Containers Based on Localized Spoof Surface Plasmon

Power-type Liquid-Level Sensor for High Refractive Index Liquid Based on Long-Period Fiber Grating

A thin-core fiber modal interferometer for liquid-level sensing

Impedance analysis for lateral field excited acoustic wave sensors

Experimental Study on Dispersion Effects of F (1,1) Wave Mode on Thin Waveguide When Embedded with Fluid

Implementation and Characterization of Liquid-Level Sensor Based on a Long-Period Fiber Grating Mach–Zehnder Interferometer

High-Resolution Ultrasonic Lamb Waves Dispersion Measurement and Plate Thickness Evaluation

The excitation and detection of Lamb waves in a droplet-loaded plate using air-coupled ultrasonic transducers