Macroscopic effects of rock slopes before and after grouting of joint planes

Hang Lin,Ping Cao,Jiang-Teng Li,Xue-liang Jiang

DOI: https://doi.org/10.1201/9780203885284-c102

2008-01-01

Abstract:Studies on slope reinforcement methods are important for geotechnical engineering. All of the reinforcement methods can be divided into two groups, the passive reinforcement methods and the active reinforcement method. Grouting is an active reinforcement method. It is to inject a cement grout mixture into the rock mass to reduce the permeability of the rock mass and improve the mechanical properties of the rock mass itself. In order to find differences of parameters between the rock mass before and after grouting, the comparative experiments of direct shear were done that indicates that the shear strength and shear stiffness of rock samples are improved greatly after grouting. However, no the whole slope must be grouted. The effective grouting areas (EGA) can be defined by relative calculations. The three dimensional explicit finite difference code, FLAC(3D), was adopted to study the differences of mechanical properties of the rock mass before and after grouting. Comparative analysis shows that stress field and displacement field of the rock mass become more symmetrical and continuous after grouting. The tensile stress area reduces and the displacement bifurcation near joint planes vanishes, both are good to the stability of slope.