Abstract:The ceramic core plays an important role in the preparation of aero-engine hollow blades, as it can directly determine the precision and pass rate of the cooling passage in the blade cavity. Sufficient high-temperature bending strength, high open porosity, and low sintering shrinkage are the main requirements for qualified ceramic cores. In order to prepare qualified ceramic cores with complex structures, in-situ mullite-reinforced Al2O3-based ceramic cores were successfully prepared using vat photopolymerization 3D printing technology. The in-situ synthesis of mullite was designed through thermodynamic analysis. The influence mechanisms of the sintering temperature and doping amount of fused silica on the open porosity, sintering shrinkage, and bending strength of the core were systematically investigated. With an increase in the sintering temperature and doping amount of fused silica, the porosity of the in situ mullite-reinforced ceramic core decreased. Sintering shrinkage increased with an increase in the sintering temperature and doping amount of fused silica. The cores containing 20 wt% fused silica showed the smallest sintering shrinkage. The bending strength increased with an increase in the sintering temperature and the doping amount of fused silica. A core doped with 20 wt% fused silica had the highest bending strength at 1773.15 K. Furthermore, 20 wt% fused silica doping, sintered at 1673.15 K, can be used to prepare in-situ mullite enhanced Al2O3-based cores with the best comprehensive properties. This core has a higher open porosity (40%), suitable bending strength of 25 MPa (at 1773.15 K), and lower sintering shrinkage in the Z direction. The significance of this study lies in the regulation of in-situ mullite generation and viscous flow in solid-liquid sintering by adjusting the doping amount of fused silica and the sintering process, and this opens up new pathways by the coordinated regulation of strength, open porosity, and sintering shrinkage of 3D printed ceramic cores.

Properties of in Situ Synthesized Alumina Ceramic Core Composites

Effect of Kyanite on Properties of Alumina-Based Ceramic Core Composites

Effect Of Silica Sol On The Properties Of Alumina-Based Duplex Ceramic Cores

THIS ARTICLE HAS BEEN RETRACTED Effect of Silica Sol on the Properties of Alumina‐Based Duplex Ceramic Cores

Alumina-Based Ceramic Core Nano-Composites For Investment Casting

Effect of Particle Size on Properties of Alumina-Based Ceramic Cores

Influence of Al2O3 Fiber on the Properties Al2O3-Based Ceramic Core

Effect of silica sol on the properties of alumina-based ceramic core composites

Preparation of Fly Ash-Based Porous Ceramic with Alumina as the Pore-Forming Agent

Preparation and properties of Al2O3/Al-2(1-0.2)Mg0.2Ti(1+0.2)O5 matrix ceramic composite

Effect of Al(OH)<sub>3</sub> Addition on the Properties of SiC/Al<sub>2</sub>O<sub>3</sub> Composite Porous Ceramics

Fabrication of Α-Alo(oh)·sio2 with Core-Shell Structures by Heterogeneous Nucleation-and-growth Processing

Effect of Al(OH) 3 on the Properties of Silica-based Ceramic Cores Prepared by Laser Powder Bed Fusion Combined with Vacuum Infiltration

Effect of Al(OH)3 addition on the properties of SiC/Al2O3 composite porous ceramics

Microstructure and mechanical properties of 3D-printed nano-silica reinforced alumina cores

Preparation and properties of alumina-carbon castables using SiC nanofiber coated graphite flake

Influence of Al2O3 content on mechanical properties of silica-based ceramic cores prepared by stereolithography

Direct ink writing additive manufacturing of porous alumina-based ceramic cores modified with nanosized MgO

Enhanced 3D printed Al2O3 core via in-situ mullite

In situ fabrication and microstructure of Al2O3 particles reinforced aluminum matrix composites

In-situ Y3Al5O12 enhances comprehensive properties of alumina-based ceramic cores by vat photopolymerization 3D printing