Abstract:This paper is a continuation study of the residual compressive strength of composite laminates after impact under hygrothermal conditions. Two carbon fibre/epoxy plywood specimens with different lay-ups ([45/-45/0/0/45/0/0/0/90/-45/0]s and [45/-45/0/90/0 /0/0/0/90/0/-45/45]s) were investigated, The materials were subjected to 500 h, 1000 h and 2000 h of service time in a climatic chamber at a temperature of 60 °C and 100% relative humidity, followed by low-velocity post-impact compression using an energy level of 15 J. Experimental and numerical simulations are used to study the residual compressive strength and damage extension of the material. Using the ultrasonic C-scan technique, the internal damage of the specimens was scanned, and the damage evolution in impact and compression tests was analysed. Damage evolution in impact and compression tests was investigated using ultrasonic C-scanning to scan the internal damage of the specimens. The strain change maps of the specimens during compression are studied using the Digital Imaging (DIC) technique. Vumat subroutine coded in Fortran and used in commercial software (ABAQUS) for numerical simulation. To study the effect of damage extension of materials on post-impact and post-impact compression for different hygrothermal times. It was found that the residual compressive strength depended on factors such as the material's hygrothermal time and the initial defects in the plywood; that the 90° and ± 45° fibre orientations played a positive role in the material's hygrothermal; that the hygrothermal made the material's damage more catastrophic; and that the buckling of hygrothermal specimens was not only at the impact position, but was also reflected at the edges. In CAI testing, it was found that the hygrothermally treated specimens were damaged similarly to the desiccation treated specimens, but that compression resulted in a flexural position affected by hygrothermal, which determined the material CAI strength.

Qualitative Separation of the Effect of Voids on the Static Mechanical Properties of Hygrothermally Conditioned Carbon/epoxy Composites

Experimental research on hygrothermal properties of carbon fiber/epoxy resin composite under different hygrothermal conditions

Research on the Aging Effects of Adhesive and Composites on the Degradation Mechanism of Composite Adhesive Joints in Thermal-Humidity-Cycles for Automobiles

Effect of temperature and cyclic hygrothermal aging on the interlaminar shear strength of carbon fiber/bismaleimide (BMI) composite

Critical Void Content for Thermoset Composite Laminates

Chemical, mechanical and morphological investigation on the hygrothermal aging mechanism of a toughened epoxy

Hygrothermal mechanical properties of domestic carbon fiber/bismaleimide resin composites for aviation application

Study on Properties of Composite Laminate with A Hole in the Hygrothermal Environment

Tensile And Compress Property Of Composite Laminate In Hygrothermal Environment

Moisture Absorption/Desorption Effects on Flexural Property of Glass-Fiber-Reinforced Polyester Laminates: Three-Point Bending Test and Coupled Hygro-Mechanical Finite Element Analysis

Effect Mechanism and Simulation of Voids on Hygrothermal Performances of Composites

Hygrothermal aging mechanism of carbon fiber/epoxy resin composites based on quantitative characterization of interface structure

Hygrothermal Behavior of Carbon Fiber Fabric Reinforced Vinylester Resin Composite Structures

Analysis of Residual Post-Impact Compressive Strength of Composite Laminates Under Hygrothermal Conditions

Experimental and numerical investigation on compression after impact behavior of hygrothermal aged CFRP laminates

The Effect of Cyclic Hygrothermal Environment on Interlaminar Shear Strength (ilss) of Ccf300/Bmi Composite

Longitudinal tensile analysis of carbon fiber/epoxy composites under the coupling effect of high and low temperature cycle-humidity-bending load

Influence of Cyclic Hygrothermal-Thermal Aging on the Interfacial Property of Carbon Fiber Reinforced Bismaleimide Resin Matrix Composite

Effect of Temperature and Humidity Coupling on the Ageing Failure of Carbon Fiber Composite/Titanium Bonded Joints

Moisture absorption process of epoxy resin and mechanical properties of its fiber composites

The effects of temperature and hygrothermal aging on the properties of CF/PA6 composite and its compression failure mechanisms