Abstract:Post‐treatment of RO membranes (laboratory and commercial scale) with aqueous solutions of N,N‐Dimethylformamide and glycerol enhances permeate flux while achieving controlled salt rejection, opening doors for broader applications in energy‐efficient desalination. Reverse osmosis (RO) effectively provides clean drinking water. Different RO membrane types are tailored to treat saline water feeds with varying characteristics. In the context of low brackish water feeds, the objective is to remove only a minimal excess of salinity through the membrane. Our study introduces a method of membrane post‐treatments capable of achieving controlled salt rejection while concurrently enhancing permeate flux, which is vital for achieving effective and energy‐efficient desalination of low brackish water. The post‐treatments were conducted on our in‐house‐developed membranes using aqueous solutions of N,N‐Dimethylformamide and glycerol for different drying times at the coupon level. The process was scaled up at the module level, allowing us to assess its potential for commercial application. At the coupon level, the permeate flux increased significantly from 3.7 ± 0.9 to 10.6 ± 0.2 L/m2·h·bar, while the salt rejection decreased from 95.6 ± 1% to 70.5 ± 1% when measured with a feed of 2,000 ppm NaCl concentration. At the module level, we observed a higher flux of 12.8 L/m2·h·bar, alongside a salt rejection of 55.5% with a similar feed. Varying post‐treatment parameters at the coupon level allowed us to attain the desired salt rejection and permeate flux values. Physical changes in both pristine and post‐treated membranes, including polymer swelling, were observed without chemical alterations, enhancing our understanding of the post‐treatment effect and its potential for broader commercial use. Practitioner Points Post‐treatment of RO membranes enhances flux. Physical structuring through polymer swelling was observed with the chemical structure unaltered. Post‐treatment of RO opens doors for broader energy‐efficient desalination application.

Reverse Osmosis Brine Treatment Using Direct Contact Membrane Distillation (DCMD): Effect of Membrane Characteristics on Desalination Performance and the Wetting Phenomenon

Membrane Distillation-Crystallization of Seawater Reverse Osmosis Brines

Preparation and Characterization of PVDF/nonwoven Fabric Flat-Sheet Composite Membranes for Desalination Through Direct Contact Membrane Distillation

Desalination of Brackish Groundwater by Direct Contact Membrane Distillation

Fouling Behavior of Calcium Phosphate in Direct Contact Membrane Distillation

Enhanced Anti-Wetted PVDF Membrane for Pulping RO Brine Treatment by Vacuum Membrane Distillation

Exergetic analysis of direct contact membrane distillation (DCMD) using PVDF hollow fiber membranes for the desalination brine treatment

Spatial variations of DCMD performance for desalination through countercurrent hollow fiber modules

Seawater desalination using PVDF-HFP membrane in DCMD process: assessment of operating condition by response surface method

Multi‐dimensional parametric study for enhancing Brackish Water Reverse Osmosis membrane performance suited for desalination of low salinity feeds

Desalination/concentration of reverse osmosis and electrodialysis brines with membrane distillation

Effect of Process Conditions of Interfacial Polymerization on Performance of Reverse Osmosis Composite Membrane

Evaluation of Anti‐wetting Nano‐fumed silica/PVDF Hollow Fiber Membrane by Central Composite Design Optimization Towards Efficient Desalination Performance via Membrane Distillation

Reliable and efficient membrane processes for clean and sustainable production of fresh water from saline waste

The Effect of Sharklet Patterns on Thermal Efficiency and Salt-Scaling Resistance of Poly (vinylidene fluoride) Membranes During Direct Contact Membrane Distillation

Built-up Superhydrophobic Composite Membrane with Carbon Nanotubes for Water Desalination

Effects of calcium carbonate nano-particles on the properties of PVDF/nonwoven fabric flat-sheet composite membranes for direct contact membrane distillation

Janus Hollow Fiber Membrane with a Mussel-Inspired Coating on the Lumen Surface for Direct Contact Membrane Distillation

Direct Contact Membrane Distillation Mechanism for High Concentration NaCl Solutions

2D CuBDC and IRMOF-1 as reverse osmosis membranes for seawater desalination: A molecular dynamics study

Integration of membrane distillation as volume reduction technology for in-land desalination brines management: Pre-treatments and scaling limitations