Abstract:An elastoplastic solution with higher-order terms for cracks in materials exhibiting pressure-sensitive yielding and plastic volumetric deformation is presented in this paper. Two-term expansions of the plane strain and plane stress solutions for a crack in a homogeneous material are obtained. It is shown that a variable-separable solution form under plane strain conditions exists only for weakly pressure-sensitive materials and the limit values of the pressure-sensitivity factor depend on the strain-hardening exponent. The second-order plane strain terms have to be solved as an eigenvalue problem and the elastic terms enter the second-order solutions only when the material has substantial strain-hardening. It follows that the second stress amplitude factor must be determined by the applied load. The values of the second exponents in the stress expansion are slightly larger than zero for most hardening materials and behave as an increasing function of the pressure-sensitivity factor. The finite element computations confirm that the second-order terms under plane strain conditions will increase dominance of the asymptotic solution remarkably. The plane stress analysis shows that the amplitudes of both leading-order and second-order solution are determined by the J-integral for most pressure-sensitive dilatant materials. The variable-separable asymptotic solution exists for all available values of the pressure-sensitivity factor. Because of rapid changes in leading-order terms of the stress component 295-1 at ϑ≥160° the second-order solution will not significantly improve the prediction of the asymptotic solution in the whole tip field. Numerical results based on the incremental theory of plasticity show that the asymptotic solution characterizes the near-tip fields. Finite strains dominate in the region 295-2 under plane strain conditions. The two-parameter boundary layer formulation with different T-stresses predicts that the higher-order terms are only weakly dependent on the distance to the crack tip and vary significantly with ϑ in the forward sector.

ELASTIC-PLASTIC FRACTURE-ANALYSIS OF FINITE BODIES .1. DESCRIPTION OF THE STRESS-FIELD

Elastic-plastic fracture analysis of finite bodies—I. Description of the stress field

Elastic-plastic Fracture Analysis of Finite Bodies—ii. Conditions of Fracture Initiation

Optical Analysis of HRR Field

Plane Stress Elastic-Plastic Fracture Criteria and Constraint Intensity in Crack Tip Regions

The Finite Analysis of Deformation and Stress Triaxiality of a Mixed I + II Mode Elastic-Plastic Crack Tip

Stresses, deformations and porosities in standard fracture specimens

Finite Deformation of a Blunt Crack Represented by a Parabolic Cavity in a Harmonic Solid

Fracture Analysis of Cracked Equilateral Triangular Hole with Surface Elasticity Effect Under Antiplane Shear

A finite-element discretization of some boundary value problems for nonlinear strain-limiting elastic bodies

ASYMPTOTIC ELASTIC STRESS FIELD NEAR A BLUNT CRACK TIP IN AN ANISOTROPIC MATERIAL

Speed-Dependent Tip Fields of A Moving Crack in A Hyperelastic Material

A Crack with Surface Elasticity in Finite Plane Elastostatics

Stress Field Near the Crack Tip in Nonlocal Anisotropic Elasticity

Stress, deformation and damage fields near the tip of a crack in a damaged nonlinear material

Elastoplastic Crack Analysis for Pressure-Sensitive Dilatant Materials ? Part I: Higher-order Solutions and Two-Parameter Characterization

Semi-analytical expressions to describe stress fields near the tip of Mode-I crack under plane-strain conditions

A novel fracture criterion for elastic‐brittle cracked body under compression and shear conditions

Analysis of a Finite Element Model of 2-D Elastic-Plastic Crack

Damage Analysis for an Elastic-Plastic Body in Cylindrical Contact with a Rigid Plane

Stress and strain fields near cracks in solids with stress state-dependent elastic properties under conditions of anti-plane shear