Abstract:In search for new technology to preserve global warming caused by fossil fuel, solar energy driven devices have been high in demand. For instance, photovoltaics (PV) are a promising technology that can produce high power conversion efficiency (PCE). In addition, photoelectrochemical (PEC) water splitting, a promising artificial photosynthesis method, is a potential alternative technique to generate renewable fuel. PEC devices can generate renewable energy sources such as hydrogen, which can alleviate CO 2 emission from fossil fuels. However, most readily employed PEC devices require external bias to function as a hydrogen producer. Thus, utilizing PV active layer as a photo absorber, PEC system is a suitable approach to the breakthrough of efficient hydrogen production. In the past decade of PV technology advances, organic-inorganic lead halide perovskite (LHP) can be arguably the most progressive research because of its tunable bandgap, fast charge separation, broad light absorption spectra, low cost, facile fabrication, and high efficiency. These advantageous properties led LHPs to be used as an active layer of water splitting devices. However, LHP-based PECs have flaws to be addressed to be viable material for PEC. LHP are known for their fragile nature from exposure to water. Hence, LHP-based PECs are commonly protected with metal foil encapsulation while covering the edges with epoxy resins. However, the metal foil provides poor contact with the LHP leading to poor charge transfer for water splitting. To solve this problem, we applied carbon conductive powder (CCP) as the interlayer to successfully facilitate charge transfer. With the proposed device modeling, monolithic PEC device that is capable of generating hydrogen in presence of low external applied bias is fabricated. Nonetheless, single monolithic PEC devices still need external applied bias to function as water splitting device which seek for further research. Therefore, adding another photoelectrode will eliminate the necessity of external bias resulting in an only solar powered water splitting device. Herein, we report unassisted solar to hydrogen conversion by using inverted and planar type LHP solar cells as photocathode and photoanode, respectively. With the integration of catalyst, 3D Ni.NiFe and NiPCoP, LHP-based PEC with exceptional performance was attained. We demonstrated unbiased PEC water splitting using a coupled LHP-based photoelectrode under alkaline conditions. Each LHP-based photoelectrode exhibited a outstanding performance of 22.42 mA cm -2 at 1.23 V RHE and 21.96 mA cm -2 at 0 V RHE for the photoanode and photocathode, respectively. Thus, we achieved solar to hydrogen (STH) of 10.64% and unassisted photo-current density of 8.65 mA/cm 2 . In addition, unbiased catalytic reactivity over 20 h retaining about 60% of photo-current density was attained.

Noble-Metal-Free Perovskite–BiVO4 Tandem Device with Simple Preparation Method for Unassisted Solar Water Splitting

BiVO4 photoelectrodes for unbiased solar water splitting devices enabled by electrodepositing of Cu2O simultaneously as photoanode and photocathode

Efficient Solar-Driven Water Splitting by Nanocone BiVO4-perovskite Tandem Cells.

Integration of Inverse Nanocone Array Based Bismuth Vanadate Photoanodes and Bandgap-Tunable Perovskite Solar Cells for Efficient Self-Powered Solar Water Splitting

Double Perovskite Cobaltites Integrated in a Monolithic and Noble Metal-Free Photoelectrochemical Device for Efficient Water Splitting

A Low-Cost Photoelectrochemical Tandem Cell for Highly-Stable and Efficient Solar Water Splitting

High-Performance Ultrathin BiVO4 Photoanode on Textured Polydimethylsiloxane Substrates for Solar Water Splitting

A Tandem Water Splitting Cell Based on Nanoporous BiVO4 Photoanode Cocatalyzed by Ultrasmall Cobalt Borate Sandwiched with Conformal TiO2 Layers

Bias‐Free Solar Water Splitting by Tetragonal Zircon BiVO4 Nanocrystal Photocathode and Monoclinic Scheelite BiVO4 Nanoporous Photoanode

Metal Oxide-Based Tandem Cells for Self-Biased Photoelectrochemical Water Splitting

New BiVO4 Dual Photoanodes with Enriched Oxygen Vacancies for Efficient Solar-Driven Water Splitting

Unassisted Photoelectrochemical Cell with Multimediator Modulation for Solar Water Splitting Exceeding 4% Solar-to-Hydrogen Efficiency

Transition metals-based electrocatalysts on super-flat substrate for perovskite photovoltaic hydrogen production with 13.75% solar to hydrogen efficiency

Integrating Low‐Cost Earth‐Abundant Co‐Catalysts with Encapsulated Perovskite Solar Cells for Efficient and Stable Overall Solar Water Splitting

Bias‐Free Solar Water Splitting by Tetragonal Zircon BiVO 4 Nanocrystal Photocathode and Monoclinic Scheelite BiVO 4 Nanoporous Photoanode

Efficient Solar-Driven Water Splitting Enabled by Perovskite Photovoltaics and a Halogen-Modulated Metal-Organic Framework Electrocatalyst

Coupled Lead Halide Perovskite Photoelectrode for Unbiased Photoelectrochemical Water Splitting

Nonfullerene Bulk Heterojunction‐Based Photocathodes for Highly Efficient Solar Hydrogen Production in Acidic and Neutral Solutions

Simultaneous Photoelectrocatalytic Water Oxidation and Oxygen Reduction for Solar Electricity Production in Alkaline Solution.

Boosting Unassisted Alkaline Solar Water Splitting Using Silicon Photocathode with TiO 2 Nanorods Decorated by Edge‐Rich MoS 2 Nanoplates

An integrated n-Si/BiVO4 photoelectrode with an interfacial bi-layer for unassisted solar water splitting