Abstract:In search for new technology to preserve global warming caused by fossil fuel, solar energy driven devices have been high in demand. For instance, photovoltaics (PV) are a promising technology that can produce high power conversion efficiency (PCE). In addition, photoelectrochemical (PEC) water splitting, a promising artificial photosynthesis method, is a potential alternative technique to generate renewable fuel. PEC devices can generate renewable energy sources such as hydrogen, which can alleviate CO 2 emission from fossil fuels. However, most readily employed PEC devices require external bias to function as a hydrogen producer. Thus, utilizing PV active layer as a photo absorber, PEC system is a suitable approach to the breakthrough of efficient hydrogen production. In the past decade of PV technology advances, organic-inorganic lead halide perovskite (LHP) can be arguably the most progressive research because of its tunable bandgap, fast charge separation, broad light absorption spectra, low cost, facile fabrication, and high efficiency. These advantageous properties led LHPs to be used as an active layer of water splitting devices. However, LHP-based PECs have flaws to be addressed to be viable material for PEC. LHP are known for their fragile nature from exposure to water. Hence, LHP-based PECs are commonly protected with metal foil encapsulation while covering the edges with epoxy resins. However, the metal foil provides poor contact with the LHP leading to poor charge transfer for water splitting. To solve this problem, we applied carbon conductive powder (CCP) as the interlayer to successfully facilitate charge transfer. With the proposed device modeling, monolithic PEC device that is capable of generating hydrogen in presence of low external applied bias is fabricated. Nonetheless, single monolithic PEC devices still need external applied bias to function as water splitting device which seek for further research. Therefore, adding another photoelectrode will eliminate the necessity of external bias resulting in an only solar powered water splitting device. Herein, we report unassisted solar to hydrogen conversion by using inverted and planar type LHP solar cells as photocathode and photoanode, respectively. With the integration of catalyst, 3D Ni.NiFe and NiPCoP, LHP-based PEC with exceptional performance was attained. We demonstrated unbiased PEC water splitting using a coupled LHP-based photoelectrode under alkaline conditions. Each LHP-based photoelectrode exhibited a outstanding performance of 22.42 mA cm -2 at 1.23 V RHE and 21.96 mA cm -2 at 0 V RHE for the photoanode and photocathode, respectively. Thus, we achieved solar to hydrogen (STH) of 10.64% and unassisted photo-current density of 8.65 mA/cm 2 . In addition, unbiased catalytic reactivity over 20 h retaining about 60% of photo-current density was attained.

Double Perovskite Cobaltites Integrated in a Monolithic and Noble Metal-Free Photoelectrochemical Device for Efficient Water Splitting

Nanoparticle Superlattices As Efficient Bifunctional Electrocatalysts for Water Splitting.

Monolithic Photoelectrochemical Device for 19% Direct Water Splitting

Integrating Low‐Cost Earth‐Abundant Co‐Catalysts with Encapsulated Perovskite Solar Cells for Efficient and Stable Overall Solar Water Splitting

Highly efficient overall water splitting driven by all-inorganic perovskite solar cells and promoted by bifunctional bimetallic phosphide nanowire arrays

A highly integrated, stand-alone photoelectrochemical device for large-scale solar hydrogen production

Coupled Lead Halide Perovskite Photoelectrode for Unbiased Photoelectrochemical Water Splitting

Ultrastable low-bias water splitting photoanodes via photocorrosion inhibition and in situ catalyst regeneration

Solar-Driven Water Splitting at 13.8% Solar-to-Hydrogen Efficiency by an Earth-Abundant Electrolyzer

Enhanced photoelectrochemical performance of ZnO/NiFe-layered double hydroxide for water splitting: Experimental and photo-assisted density functional theory calculations

Unassisted Photoelectrochemical Cell with Multimediator Modulation for Solar Water Splitting Exceeding 4% Solar-to-Hydrogen Efficiency

Cuco Hybrid Oxides As Bifunctional Electrocatalyst for Efficient Water Splitting

Recent Progress in Photoelectrochemical Water Splitting for Solar Hydrogen Production

Transition metals-based electrocatalysts on super-flat substrate for perovskite photovoltaic hydrogen production with 13.75% solar to hydrogen efficiency

Interface Engineered Co, Ni, Fe, Cu Oxide Hybrids with Biphasic Structures for Water Splitting with Enhanced Activity

An Iron Oxide -Copper Bismuth Oxide Photoelectrochemical Cell for Spontaneous Water Splitting

Engineering Single-Atomic Ni-N 4 -O Sites on Semiconductor Photoanodes for High-Performance Photoelectrochemical Water Splitting

Hydrothermal-Dependent Oxygen Vacancy-Rich NiFe Layered Double Hydroxide/BiVO4 Photoanodes for Stable Solar Water Splitting

A semiconductor-electrocatalyst nano interface constructed for successive photoelectrochemical water oxidation

Electrocatalytic water splitting over perovskite oxide catalysts

Cobalt Phosphate-Modified (GaN) 1– x (ZnO) x /GaN Branched Nanowire Array Photoanodes for Enhanced Photoelectrochemical Performance