Abstract:The paper considers the method of computer simulation of the stress-strain state of the drive drum shell in the NASTRAN integrated environment. Due to the complexity of determining stresses and deformations in the drum sections by the analytical method, it is proposed to solve this important problem using the numerical finite-element method. At the preliminary stage of computer modeling, a mechanical design scheme was developed, including a variable pressure that changes depending on the angle of rotation of the drum, the deterministic relations describing the variable force factors are based on the Euler ratio. It is also proposed to take into account the pressure from the variable friction force, which depends on the changing coefficient of adhesion of the belt to the drum. As a result of the computer calculation, the equivalent Mises stresses of 65 MPa were determined, the safety factor was 4.2 and the components of the tangential stresses were determined using the stress tensor marker, the shear stress reached the level τ=16 MPa for fabric tape and τ=3.14 MPa for rubber tape. According to the results of the calculation, the dependence of the tangential stresses on the angle of rotation of the drum was constructed. A diagram of the change in the component of tangential stresses along the forming shell of the drum was constructed. Analysis of stress-strain state allowed us to determine the factor of safety of the drum shell. Based on the analysis of equivalent stresses, it is proposed to further calculate the durability of the drum using the method of long-term fatigue. The computer calculation of shear stresses in the component allows choosing the rational parameters of the lining, based on such indicators as peel strength and break, as well as determining the angle 61° of the slab lining required to improve the reliability and traction ability of the pipeline

THE DYNAMIC ANALYSIS OF BELT CONVEYOR DRIVING DRUM BASED ON FINITE ELEMENT MODEL

The Design of Dynamic Balancing Machine Based on Finite Element Analysis

Modeling and Simulation Technology of Complex Mechanical Systems

Structural Dynamics of Corn Threshing Drum Based on Computer Simulation Technology

Dynamic characteristic analysis and startup optimization design of an intermediate drive belt conveyor with non-uniform load

Dynamics Analysis Of A Rigid Rotor System With Drum On Supports

An electromechanical coupling model for an inclined drum washing machine vibration system based on Euler-Lagrange theory

Dynamic modeling and analysis for a drive axle gear transmission system

Finite Element Modeling and Dynamic Analysis of Rotating Disc and Drum Connected by Bolted Joints

Dynamic Behaviour of a Conveyor Belt Considering Non-Uniform Bulk Material Distribution for Speed Control

Development of a technique for computer simulation of the stress state of the drive drum shell of a belt conveyor to optimize its design parameters

Non-Linear Analysis Of Elastic Quality For Belt Drives

Experimental Investigation and Analysis on Dynamic Strain of Leading Trailing Shoe Drum Brake

Conveyor belt structure of belt dryer: Analysis and optimization

Dynamics of Drive Axle System with Effects of Input Torque

Dynamics modeling and simulation of steel cord conveyor belt based on dynamic elastic modulus

A discrete analysis of metal-v belt drive

Investigation of The Dynamic Deflection of Conveyor Belts Via Simulation Modelling Methods on Idler Factor

Dynamic analysis of top-loader washing machine with unbalance mass during dehydration and its validation

Belt Conveyor Dynamic Characteristics and Influential Factors

Multilevel finite element modeling and coupling vibration analysis of the drum in blade–disk–drum assembly