Abstract:Layered Ni-rich compound LiNi0.5Co0.2Mn0.3O2 has drawn considerable attention recently because high Ni content contributes to the improvement of specific capacity and the reduction of cost. However, it is a challenge to obtain the Ni-rich LiNi0.5Co0.2Mn0.3O2 cathode with both high rate performance and high tap density because the rate capability is often improved at the expense of volumetric energy density, which is mostly dependent on the tap density. In our work, an uniform Ni-rich LiNi0.5Co0.2Mn0.3O2 microsphere with an average diameter of ca. 5 mu m and tap density of 2.1 g.cm(-3) was successfully prepared using carbonate co-precipitation method, which can meet the commercial requirement for lithium-ion batteries (tap density >= 2.1 g.cm(-3), Lithium Nickel Cobalt Manganese Oxides from CETC International Co., Ltd). In this synthetic route, the 2 mol.L-1 mixture of NiSO4.6H(2)O, MnSO4.H2O and CoSO4.7H(2)O (Ni: Co: Mn=5: 2: 3, molar ratio) are the starting materials, 2 mol.L-1 Na2CO3 and 4 mol.L-1 NH3.H2O are the precipitant and chelating agent, respectively. In order to achieve high tap density, the stirring speed of continuous stirred tank reactor (CSTR) is as high as 1500 r/min, and the powder was preheated at 550 degrees C for 6 h and then calcined at 850 degrees C for 14 h in flowing oxygen. Powder X-ray diffraction (XRD) and transmission electron microscopy (TEM) results indicate that the microsphere LiNi0.5Co0.2Mn0.3O2 material has a well-ordered alpha-NaFeO2 structure with stable in-plane [root 3 x root 3]R30 degrees ordering in the transition-metal layers. Electrochemical results also confirm that this cathode has excellent cycling stability and high rate capability. Specifically, it exhibits a discharge capacity of 150 mAh.g(-1) between 2.7 and 4.3 V at 1C after 100 cycles, with outstanding capacity retention of 94.6%. At 30C rate, it can still deliver a high discharge capacity of 96 mAh.g(-1). Meanwhile, the energy storage capacity for this cathode is also encouraging. At 0.1C rate, the specific energy ( Es) is 687.83 Wh.kg(-1) ( volumetric energy density is 1444.45 Wh.L-1 ); at 30C rate, the specific energy (E-s) is 335.27 Wh.kg(-1) (volumetric energy density is 704.07 Wh.L-)(-1). These excellent features will make this microsphere LiNi0.5Co0.2Mn0.3O2 material as a potential positive electrode material for commercial high energy density lithium- ion batteries.

Synthesis and Electrochemical Properties of High Capacity Lini0.9co0.05mn0.025mg0.025o2 Cathode for Lithium Ion Batteries

Preparation and Electrochemical Properties of Li[Ni1/3Co1/3Mn1−x/3Zrx/3]O2 Cathode Materials for Li-ion Batteries

Synthesis and Electrochemical Characteristics of Li₁.₂(Ni₀.₂Mn₀.₆)ₓ(Co₀.₄Mn₀.₄)y(Ni₀.₄Mn₀.₄)₁₋ₓ₋yO₂ (0 ≤ X + Y ≤ 1) Cathode Materials for Lithium Ion Batteries

Synthesis and Characterization of Lini0.45co0.10mn0.45o2 Cathode for Lithium Ion Batteries

Synthesis, Characterization and Electrochemical Performance of Li[Li0.2Mn0.54Ni0.13Co0.13]O2cathode Materials for Lithium-Ion Batteries

Synthesis and electrochemical properties of Li[Li0.2Mn0.54 Ni0.13-Co0.13]O2 as cathode material for Li-ion batteries

Synthesis and Electrochemical Characteristics of Layered LiNi0.6Co0.2Mn0.2O2 Cathode Material for Lithium Ion Batteries

Synthesis and Characterization of LiNi_(1/3)Mn_(1/3)Co_(1/3)O_2 by High Temperature Solid-state Method

Synthesis and Electrochemical Properties of Li[Li0.2Ni0.2Mn0.6]O2 As High Capacity Cathode Material

Synthesis and Electrochemical Properties of LiCo0.9Ni0.05Mn0.05O2 Cathode Material with High Rate Capability for Lithium Ion Batteries

Synthetic Optimization and Electrochemical Properties of LiNi_(0.5)Mn_(0.5)O_2 Cathode Materials for Lithium-ion Batteries

Synthesis and electrochemical characterization of layered Li[Ni1/3Co1/3Mn1/3]O2 cathode material for Li-ion batteries

Synthesis and Characterization of LiNi 0.45 Co 0.10 Mn 0.45 O 2 Cathode for Lithium Ion Batteries

Preparation And Electrochemical Performance Of Na+ -Stabilized Layered Lini0.6 Co-0.2 Mn-0.2 O-2 Cathode Material For Lithium-Ion Batteries

Preparation and Electrochemical Performance of Li[Ni1/3co1/3mn1/3]O-2 Cathode Material for High-Rate Lithium-Ion Batteries

Synthesis and electrochemical characterization of layered Li[Ni_(1/3)Co_(1/3)Mn_(1/3)]O_2 cathode materialfor Li-ion batteries

Preparation And Electrochemical Performance Of High Rate Spherical Layered Lini (0.5) Co-0.2 Mn-0.3 O-2 Cathode Material For Lithium-Ion Batteries

Properties Characterization of LiNi_(1/3)Co_(1/3)Mn_(1/3)O_2 Cathode Materials for Li-ion Batteries

High capacity 0.5Li2MnO3·0.5LiNi 0.33Co0.33Mn0.33O2 cathode material via a fast co-precipitation method

Optimization of Synthesis Parameters for Uniform Sphere-Like Li1.2Mn0.54Ni0.13Co0.13O2 As High Performance Cathode Material for Lithium Ion Batteries

Synthesis and Characterization of Lini1/3co1/3mn1/3o2 As Cathode Materials for Li-Ion Batteries Via an Efficacious Sol-Gel Method