Abstract:Spinel LiMgxMn2-xO4 cathode materials were synthesised using a hydrothermal method, with the effects of doping Mg on the structure and electrochemical performance of LiMn2O4 subsequently investigated. It was found that no other hybrid phases existed in the LiMgxMn2-xO4 and that doped Mg cannot change the spinel lattice type of LiMn2O4. An appropriate Mg content was beneficial for improving the crystallinity and particle uniformity of the samples. The electrochemical performance of the LiMgxMn2−xO4 was assessed in the 2.9~4.3 V range, with the specific discharge capacity of the LiMn2O4 potentially reaching 139.9 mAh g−1 at 0.2 C, with a capacity retention rate of 63.76% after 100 cycles. Furthermore, the LiMn1.97Mg0.03O4 demonstrated an excellent cycling performance at both room temperature (25°C) and at a high temperature (55°C). At 25°C, the first specific discharge capacity was 124.3 mAh g−1 at 0.2 C, with a capacity retention rate of 94.29% after 100 cycles, while the specific discharge capacity can reach 94.8 mAh g−1 at 5 C and 74.0 mAh g−1 at 10 C. At 55°C, the initial specific discharge capacity was 125.6 mAh g−1 at 0.2 C, with a capacity retention rate of 85.43% after 100 cycles. The cyclic voltammogram curves and electrochemical impedance spectroscopy results indicated that, compared with the pristine LiMn2O4, the LiMn1.97Mg0.03O4 had a larger Li+-ion diffusion coefficient and smaller resistance during the charge–discharge process. Overall, the results indicated that Mg doping is beneficial in improving the electrochemical performance of spinel LiMn2O4.

Cr3+ and Ni2+ Co-doped Spinel Oxide Cathode with Improved Capacity and Voltage Stability in Thermal Battery for Geothermal Borehole

Development and Prospect of Oxide Cathode Materials for High Temperature Lithium Batteries

Inverse Spinel-Structured Mg2MnO4 Coating to Enable Superior Thermal Stability of LiNi0.83Co0.12Mn0.05O2 Cathodes for Lithium-Ion Batteries

Lithium Manganese Spinel Cathodes for Lithium‐Ion Batteries

Preparation of co doped spherical spinel LiMn {sub 2} O {sub 4} cathode materials for Li ion batteries

Synthesis and characterization of Li1.05Co0.3Ni0.35Mn0.3M0.05O2 (M=Ge,Sn)cathode materials for lithium ion battery

Improved Cycling Performance of Oxygen-Stoichiometric Spinel Li1+xAlyMn2−x−yO4+δ at Elevated Temperature

Enhanced Cycling Stability of Multi-Cations Doped Spinel Lithium Manganese Oxide for Rechargeable Lithium Batteries

Preparation and performance of Mg-doped spinel-structured LiMn2O4 cathode materials

Strengthening Reversibility at High Rate of Spinel LiMn2O4 by Aluminum and Copper Co-doping for Lithium Ion Battery

A long cycle-life high-voltage spinel lithium-ion battery electrode achieved by site-selective doping.

Effects of Al and Co doping on the structural stability and high temperature cycling performance of LiNi0.5Mn1.5O4 spinel cathode materials

Enhanced Cycling Performance of Spinel LiNi0.5Mn1.5O4 Cathodes through Mg-Mn Hetero-Valent Doping via Microwave Sol-Gel Method

Optimized Morphology and Tuning the Mn3+ Content of LiNi0.5Mn1.5O4 Cathode Material for Li-Ion Batteries

Structural, electrochemical and cycling properties of Nb5+ doped LiNi0.8Co0.1Mn0.1O2 cathode materials at different calcination temperatures for lithium-ion batteries

Zr-doping Stabilizes Spinel LiMn 2 O 4 As a Low Cost Long Cycle Life Cathode for Lithium Ion Batteries

Hydrothermal Synthesis and Electrochemical Performance of LiNi<sub>0.5</sub>Mn<sub>0.5</sub>O<sub>2</sub> as Lithium-Ion Battery Cathode

Electrochemical and ex situ XRD studies of a LiMn1.5Ni0.5O4 high-voltage cathode material

Enhanced Cyclability of LiNi0.6Co0.2Mn0.2O2 Cathodes by Integrating a Spinel Interphase in the Grain Boundary.

Doping Mg2+ to Improve the Li+ Diffusion Rate and Electrochemical Performance of Spinel LiMn2O4

Hydrothermal synthesis of Mg-doped LiMn2O4 spinel cathode materials with high cycling performance for lithium-ion batteries