Abstract:An open challenge for developing solar-driven Ta 3 N 5 -based photoanodes with the ability to induce low-bias photoelectrochemical (PEC) water splitting is that their deep-level defects originated from low-valent tantalum cations (Ta 3+ ) and nitrogen vacancies (V N ) seriously reduce the photovoltage and thus increase the bias for water splitting. Herein, we developed an effective topotactic transition synthesis route of producing few deep-level defects porous Ta 3 N 5 film from the precursor film of ammonium tantalum oxyfluoride compound ((NH 4 ) 2 Ta 2 O 3 F 6 ) pyramids on the Ta foil. The highly electronegative fluoride ions in (NH 4 ) 2 Ta 2 O 3 F 6 could weaken the Ta–O bonds and the accompanied porous structure facilitates reactant diffusion, which favors the complete nitridation. Consequently, the resulting porous Ta 3 N 5 film has very few deep-level defects, enabling an ultralow photocurrent onset potential at 0.2 V ( vs . RHE) and a short-circuit photocurrent density ( J sc ) of 3.28 mA cm −2 after decorating oxygen evolution reaction (OER) cocatalysts under AM 1.5 G irradiation. Moreover, the J sc can retain 85% of the initial value for a 5 h continuous stability test. By reducing the particle size of (NH 4 ) 2 Ta 2 O 3 F 6 pyramid precursor, the deep-level defects could be further lowered in the Ta 3 N 5 film, achieving the photoactivity for water oxidation at 0 V ( vs . RHE) after modifying the OER co-catalyst. Graphical (NH 4 ) 2 Ta 2 O 3 F 6 pyramid array films were rationally prepared for the synthesis of less defective Ta 3 N 5 films via the thermal nitridation induced topological transition for ultralow-bias photoelectrochemical water splitting. Download : Download high-res image (109KB) Download : Download full-size image

In Situ Hydrolysis Deposition of an Efficient Ta3N5 Microsphere Photoanode for Solar Water Splitting

Interface Engineering of Ta3N5 Thin Film Photoanode for Highly Efficient Photoelectrochemical Water Splitting

A Co-catalyst-Loaded Ta<sub>3</sub>N<sub>5</sub>Photoanode with a High Solar Photocurrent for Water Splitting upon Facile Removal of the Surface Layer

Ge-mediated modification in Ta3N5 photoelectrodes with enhanced charge transport for solar water splitting.

A co-catalyst-loaded Ta(3)N(5) photoanode with a high solar photocurrent for water splitting upon facile removal of the surface layer.

Charge Carrier Transfer in Ta3n5 Photoanodes Prepared by Different Methods for Solar Water Splitting

What Limits the Performance of Ta3N5 for Solar Water Splitting

LaCl3 Flux Mediated Ta3N5 Planar Photoanode for Solar Water Oxidation

Co3o4 Nanoparticles As Robust Water Oxidation Catalysts Towards Remarkably Enhanced Photostability Of A Ta3n5 Photoanode

Cathodic Shift of A Photo-Potential on A Ta3n5 Photoanode by Post-Heating A Tio2 Passivation Layer

High-Performance Ultrathin BiVO4 Photoanode on Textured Polydimethylsiloxane Substrates for Solar Water Splitting

Enhanced Water‐Splitting Performance of Perovskite SrTaO2N Photoanode Film Through Ameliorating Interparticle Charge Transport

A Ta 3 N 5 photoanode with few deep-level defects derived from topologic transition of ammonium tantalum oxyfluoride for ultralow-bias photoelectrochemical water splitting

Molten Salt-Assisted A-Axis-oriented Growth of Ta3N5 Nanorod Arrays with Enhanced Charge Transport for Efficient Photoelectrochemical Water Oxidation

Enhanced Spatial Charge Separation in a Niobium and Tantalum Nitride Core-Shell Photoanode: In Situ Interface Bonding for Efficient Solar Water Splitting

Nanostructured TaON/Ta3N5 As a Highly Efficient Type-Ii Heterojunction Photoanode for Photoelectrochemical Water Splitting

Synergy of porous structure and cation doping in Ta3N5 photoanode towards improved photoelectrochemical water oxidation

Ta-Doped Porous TiO2 Nanorod Arrays by Substrate-Assisted Synthesis: Efficient Photoelectrocatalysts for Water Oxidation

Band structure engineering and defect control of Ta3N5 for efficient photoelectrochemical water oxidation

Engineering band structure via dual atoms modification for the efficient photoanode

In Situ Preparation of a Ti3+ Self‐Doped TiO2 Film with Enhanced Activity As Photoanode by N2H4 Reduction