Abstract:Porous carbon materials with developed porosity, high surface area and good thermal- and chemical-resistance are advantageous for gas adsorption and separation. However, most carbon adsorbents are in powder form which exhibit high pressure drop when deployed in practical separation bed. While monolithic carbons have largely addressed the pulverization problem and preserved kinetics and usually suffer from abrasion during multiple adsorption-desorption cycles. Herein, we proposed the designed synthesis of mechanically robust carbon monoliths with hierarchical pores, solid nitrogen-containing framework. The synthesis started with the polymerization of resorcinol and formaldehyde under weakly acidic conditions generated from cyanuric acid, and then an appropriate amount of hexamethylenetetramine (HMTA) was added as a crosslinker to prompt the formation of three dimensional frameworks. After carbonization process, the as-obtained porous carbon monoliths have a high radial compressive strength of 886 N/cm as well as a BET specific surface area of up to 683 m(2)/g. At approximately 1 bar, the CO2 equilibrium capacities of the monoliths are in the range of 3.1-4.0 mmol/g at 273 K and of 2.3-3.0 mmol/g at 298 K, exhibiting high selectivity for the capture of CO2 over N-2 from a stream which consists of 16.7% (v%) CO2 in N-2. Meanwhile, they undergo a facile CO2 release in an argon stream at 298 K, indicating a good regeneration capacity. After cycle testing, sieving and regeneration, the adsorbent has no mass loss, compared to that of its fresh counterpart. (C) 2019 Science Press and Dalian Institute of Chemical Physics, Chinese Academy of Sciences. Published by Elsevier B.V. and Science Press. All rights reserved.

Synthesis of Sulfur Doped Porous Carbon at Room Temperature for CO2 Adsorption

Biomass-derived Sulfur-Doped Porous Carbon for CO 2 and CH 4 Selective Adsorption

Synthesis and characterization of polyphenylene sulfide resin-derived S-doped porous carbons for efficient CO 2 capture

Effect of Porosity Parameters and Surface Chemistry on Carbon Dioxide Adsorption in Sulfur-Doped Porous Carbons

Facile Synthesis of MOF-5-derived Porous Carbon with Adjustable Pore Size for CO2 Capture

One-pot synthesis of self S-doped porous carbon for efficient CO2 adsorption

Resorcinol–formaldehyde Resin-Based Porous Carbon Spheres with High CO2 Capture Capacities

Structurally Designed Synthesis of Mechanically Stable Poly(benzoxazine-co-resol)-Based Porous Carbon Monoliths and Their Application As High-Performance CO2 Capture Sorbents

Synthesis of Porous Carbons Derived from Metal-Organic Coordination Polymers and Their Adsorption Performance for Carbon Dioxide

Sulfur-Doped porous carbon Adsorbent: A promising solution for effective and selective CO 2 capture

Self-Activating Approach for Synthesis of 2,6-Naphthalene Disulfonate Acid Disodium Salt-Derived Porous Carbon and CO 2 Capture Performance

Highly Efficient CO2 Adsorption by Nitrogen-Doped Porous Carbons Synthesized with Low-Temperature Sodium Amide Activation

Nitrogen/Oxygen Co-Doped Porous Carbon Derived from Biomass for Low-Pressure CO2 Capture

Preparation of sulfur-doped microporous carbons for the storage of hydrogen and carbon dioxide

N, S, O Co-Doped Porous Carbons Derived from Bio-Based Polybenzoxazine for Efficient CO2 Capture

A facile approach to the preparation of S-doped porous carbons for CO 2 adsorption

Probing The Role Of O-Containing Groups In Co2 Adsorption Of N-Doped Porous Activated Carbon

Benzimidazole Precursor-Derived N-Doping Porous Carbon with High-Efficiency Co2 Selective Adsorption: Insight from Experimental and Theoretical Study

Chitosan Derived Nitrogen-Doped Microporous Carbons for High Performance CO2 Capture

Synthesis of mechanically robust porous carbon monoliths for CO<sub>2</sub> adsorption and separation

N,S-containing polycondensate-derived porous carbon materials for superior CO<sub>2</sub> adsorption and supercapacitor