Abstract:Electrospray ionization (ESI) mass spectrometry can be divided into three steps: Nebulization of a sample solution into electrically charged droplets, liberation of ions from droplets, and transportation of ions from the atmospheric pressure ionization source region into the vacuum and mass analyzer of the mass spectrometer. A sample solution is fed through a capillary tube and a high electric field at the tip of the tube pulls positive charge towards the liquid front. When electrostatic repulsion becomes stronger than the surface tension, a small electrically charged droplet leaves the surface and travels through the surrounding gas to the counter-electrode. Under the majority of experimental liquid chromatography–mass spectrometry and capillary electrophoresis–mass spectrometry conditions, positive charge on droplets is generated by the removal of negative charge via electrochemical discharge of negative ions against the metal wall of the spray capillary. When the ESI source is set up for the detection of negative ions, all power supplies are at reversed polarity. Removal of positive ions inside the tip of the spray capillary provides droplets depleted of positive charge. The supply of negative charge to the solution may also take place; electrons released from the spray capillary can be captured by sample molecules having a high electron affinity. Droplet size decreases and charge density at the droplet surface increases after droplet disintegration and solvent evaporation. When the electric field at the surface of a droplet has become sufficiently high, ions are emitted from the droplet surface into the surrounding gas and are sampled by the mass analyzer. Sample ion intensity is dependent on ion structure and is affected by solvent composition and presence of additives. ESI behaves as a concentration sensitive detector for chromatography. When the sample concentration is increased above 10 μM, the sample ion signal saturates, which can be explained by the assumption that the surface of ion-emitting droplets is full at 10 μM. Sample ion abundance over a wide m/z range is further affected by inherently mass-dependent efficiencies of ion transportation, ion separation and ion detection.

Development and Application of Modification of Desolvation Process in Electrospray Ionization

Alleviation of Electrochemical Oxidation for Peptides and Proteins in Electrospray Ionization: Obtaining More Accurate Mass Spectra with Induced High Voltage

Facile Improvement of Negative Ion Mode Electrospray Ionization Using Capillary Vibrating Sharp-Edge Spray Ionization

Gentle Protein Ionization Assisted by High-Velocity Gas Flow

Sensitive ionization of non-volatile analytes using protein solutions as spray liquid in desorption electrospray ionization mass spectrometry.

Suppression of Protein Structural Perturbations in Native Electrospray Ionization During the Final Evaporation Stages Revealed by Molecular Dynamics Simulations

Unfolding of Proteins Monitored by Electrospray Ionization Mass Spectrometry:a Comparison of Different Condition

Analytical Properties of Electrospray Ionization Mass Spectrometry with Solid Substrates and Nonpolar Solvents

Molecular Dynamics Simulations of Native Protein Charging in Electrosprayed Droplets with Experimentally Relevant Compositions

Enhanced Desorption Electrospray Ionization Mass Spectrometry via Synchronizing Ion Generation and Ion Injection

Principle and Progress of Electrospray Ion Source

Rapid Desalting During Electrospray Ionization Mass Spectrometry for Investigating Protein-Ligand Interactions in the Presence of Concentrated Salts

Conformational Effects in Protein Electrospray-Ionization Mass Spectrometry.

On the Mechanism of Extractive Electrospray Ionization.

Electrochemical Aspects of Electrospray and Laser Desorption/Ionization for Mass Spectrometry

A Simplified Electrospray Ionization Source Based On Electrostatic Field Induction For Mass Spectrometric Analysis Of Droplet Samples

Recent Advances In Supercharging Of Proteins During Electrospray Ionization

On an aerodynamic mechanism to enhance ion transmission and sensitivity of FAIMS for nano-electrospray ionization-mass spectrometry

Mechanistic aspects of electrospray ionization

Alleviation of ion suppression effect in sonic spray ionization with induced alternating current voltage.

Practical implications of some recent studies in electrospray ionization fundamentals