Abstract:Single-walled carbon nanohorns (SWCNHs) was utilized as an ion-to-electron transducer to fabricate all-solid-state ion-selective electrodes (ISE) for the first time. To evaluate the performance of developed SWCNHs-based calcium ISE, various electrochemical experiments were carried out. A Nernstian response (29.69 +/- 0.24 mV/decade, R-2 = 0.9996) was acquired across a broad linear range between 10(-6) and 10(-2) M, and the detection limit of 10(-6.1) M was achieved in the meantime. Additionally, water layer test and reversed chronopotentiometry were used to estimate the long-term and short-term stability of SWCNHs-based ISE, respectively, indicating SWCNHs is capable of enhancing potential stability on account of its hydrophobicity. Furthermore, a SWCNHs-based reference electrode (RE) was fabricated by directly coating a photo-polymerised reference membrane (RM) onto a SWCNHs modified electrode. Results demonstrated that the SWCNHs-based RE exhibited slight potential fluctuation for common ions with different charges over a wide concentration range of calibration. Based on these superior results, an integrated all-solid-state SWCNHs-based potentiometric sensing device combined SWCNHs-based ISE and SWCNHs-based RE was constructed for detecting calcium, which shows a Nernstian response with a slope of 27.14 mV/decade. This developed electrode in the aid of SWCNHs exhibits fast response as well as outstanding potential stability, making it extreme promising for routine sensing application.

Determination of Concentration of Serum Potassium Ion Using All-Solid-State Potassium Ion Selective Electrode Based on Two-Dimensional Manganese Dioxide Nanosheet

Disposable Blood Potassium Sensors Based on Screen-Printed Thick Film Electrodes

An all-solid-state ion-selective electrode for dopamine determination

A Miniature Potentiometric Sensor for Dopamine Determination in Vitro

All-solid-state Potentiometric Biosensors Based on Electropolymerized Poly(3,4-ethylenedioxythiophene) As Solid Contact for Acetylcholine Determination in Artificial Cerebrospinal Fluid

All-solid-state blood calcium sensors based on screen-printed poly(3,4-ethylenedioxythiophene) as the solid contact

Development of an all-solid-state potassium ion-selective electrode using grapheme as the solid-contact transducer

All-Solid-State Carbonate-Selective Electrode Based on Screen-Printed Carbon Paste Electrode

Development of an all-solid-state potassium ion-selective electrode using graphene as the solid-contact transducer

A Paper-Based Microfluidic Device for Real-Time Sweat Potassium Monitoring

A Nonflammable Electrolyte Enabled High Performance K0.5MnO2 Cathode for Low-Cost Potassium-Ion Batteries

Phase-dependent Ion-to-electron Transducing Efficiency of WS2 Nanosheets for an All-Solid-state Potentiometric Calcium Sensor.

Conductive Polymer Nanoparticles as Solid Contact in Ion-Selective Electrodes Sensitive to Potassium Ions

High-Performance Potassium-Selective Biosensor Platform Based on Resistive Coupling of a-IGZO Coplanar-Gate Thin-Film Transistor

Fabrication and Characterization of Potassium Ion-Selective Electrode Based on Porous Silicon

All-solid-state Potentiometric Sensor Using Single-Walled Carbon Nanohorns As Transducer

Determination of sodium and potassium ions in patients with SARS-Cov-2 disease by ion-selective electrodes based on polyelectrolyte complexes as a pseudo-liquid contact phase

A one‐step fluorescence sensor based on molybdenum disulfide nanosheets for the detection of potassium ions

Direct fluorescent measurement of blood potassium with polymeric optical sensors based on upconverting nanomaterials.

A multichannel electrochemical all-solid-state wearable potentiometric sensor for real-time sweat ion monitoring

Microfluidic aptasensor POC device for determination of whole blood potassium