Abstract:In this paper, the effectiveness of using newly proposed novel external sub-structures (precast bolt-connected steel-plate reinforced concrete buckling-restrained-brace-frame, PBSPC BRBF) for reducing the collapse as well as post-earthquake demolition risks of old reinforced concrete frames within 20 km near-fault regions is investigated. Two old reinforced concrete frames representing typical school or hospital buildings in western China are selected and retrofitted via PBSPC BRBF. Elaborated numerical simulation models of the retrofitted frames are developed and, two sets of ground motions including 121 near-fault pulse-like ground motions and 40 non-pulse-like ground motions are selected for incremental dynamic analysis (IDA) of the frame models. Effects of the period of velocity pulse on collapse and demolition capacity of the frames are studied. Near-fault probabilistic seismic hazard analysis is conducted for four sites near a representative active fault and, combining with the IDA results, parameterized seismic collapse and demolition fragility surfaces of the frames are calculated. With the fragility surfaces, effects of site to fault distance on failure probabilities of the frames are discussed. Meanwhile, collapse and demolition risks of the frames under two hazard levels, namely design basic earthquake and maximum considered earthquake, are investigated. Results indicate that the median collapse and demolition capacity of the 6-story unretrofitted frame will decrease from 1.03 and 0.97 g to 0.91 and 0.87 g, respectively, when the site to fault distance decrease from 20 km to 5 km. The PBSPC BRBF can effectively increase the collapse and demolition capacity of the old frames. The 6-story frame at 10 km site can get 120.4% and 116.7% increased collapse and demolition capacity after retrofitting. The retrofitted frames can meet the collapse performance requirements and repairable performance requirements at sites larger than 10 km and 5 km, respectively. Research results in this study can provide basis for the seismic designing and decision making for retrofitting of old frames in near-fault regions.

Research on the Seismic Retrofitting Performance of RC Frames Using SC-PBSPC BRBF Substructures

Probabilistic Seismic Performance Assessment of RC Frames Retrofitted with External SC-PBSPC BRBF Sub-structures

Experimental and theoretical investigations of the existing reinforced concrete frames retrofitted with the novel external SC-PBSPC BRBF sub-structures

Seismic performance upgrade of RC frame buildings using precast bolt-connected steel-plate reinforced concrete frame-braces

Seismic performance improvement of existing RCFs using external PT-PBSPC frame sub-structures: Experimental verification and numerical investigation

Pushover-based probabilistic seismic capacity assessment of RCFs retrofitted with PBSPC BRBF sub-structures

Experimental and Numerical Study of Outside Strengthening with Precast Bolt-Connected Steel Plate–Reinforced Concrete Frame-Brace

Experimental research on seismic performance of BRB concrete frames

Experimental Study on Seismic Upgrading of RC Frames Using Innovative Brace System with Two-Stage Characteristic

Seismic Fragility Evaluation of SCCB-Enhanced RC Frame Structures

Self-centering Cable Brace with Friction Devices for Enhancing Seismic Performance of RC Frame Structures

A stochastic CSM-based displacement-oriented design strategy for the novel precast SRC-UHPC composite braced-frame in the externally attached seismic retrofitting

Seismic Performance Evaluation of Buckling-Restrained Braced RC Frames Considering Stiffness and Strength Requirements and Low-Cycle Fatigue Behaviors

Experimental Performance Of A Full-Scale Spatial Rc Frame With Buckling-Restrained Braces Subjected To Bidirectional Loading

Comparative Seismic Performance Assessment of Reinforced Concrete Frame Structures with and Without Structural Enhancements Using the FEMA P-58 Methodology

Research on the Seismic Behavior of RC Frame Structure Strengthened with Externally Attached Rocking SRC Sub- frame

Experimental study on seismic behavior of assembly CFST composite frames with bucking restrained braces

Seismic Collapse and Reparability Performance of Reinforced Concrete Frames Retrofitted with External PBSPC BRBF Sub-Frame in Near-Fault Regions

Seismic performance evaluation of a self-centering precast reinforced concrete frame structure

Innovative Self-Centering Tension-Only Braces for Enhanced Seismic Resilience in Frame Structures: an Experimental and Numerical Analysis

Cyclic test and finite element analysis of a steel double K-braced frame with laterally-restrained plates for RC building retrofit