Abstract:A series of NiMo/gamma-Al2O3 hydrodesulfurization (HDS) catalysts with different metal-support interactions were first prepared by a conventional impregnation method through changing the calcination temperature. The physicochemical properties of nickel species and molybdenum species in the oxidic and sulfidic catalysts were characterized by X-ray fluorescence spectroscopy, X-ray diffraction, N-2 adsorption-desorption, ultraviolet-visible spectroscopy, Raman spectroscopy, H-2 temperature-programmed reduction, X-ray photoelectron spectroscopy, and high resolution transmission electron microscopy. It was found both the interaction between nickel and gamma-alumina (Ni-Al2O3 interaction) and the interaction between molybdenum and gamma-alumina (Mo-Al2O3 interaction) gradually increase with increasing calcination temperature. However, the calcination temperature has a weak influence in the sulfidation degree of molybdenum species but a huge effect on the decoration degree of Ni species on edges of MoS2 nanoslabs. The decoration degree of Ni species visibly declines with increasing calcination temperature, but the sulfidation degree of molybdenum stays nearly parallel at the same time, indicating that Ni rather than Mo is more sensitive to the calcination temperature. In addition, the MoS2 morphology could be impacted by the availability of surface nickel atoms. These results suggest that the Ni-Al2O3 interaction imposes a more dominant influence on the HDS catalysts. Then the HDS performance was evaluated using dibenzothiophene as the model reactant, and through correlating the catalyst structures with the activity, an original suggestion about the effects of the Ni-Al2O3 interaction on HDS performance was given: the Ni-Al2O3 interaction not only enhances the availability of surface nickel atoms to form more NiMo-S active sites, but also improves the microstructures of MoS2, i.e., shorter nanoslabs and higher stacking layers, which together enhance the apparent activity and intrinsic activity of Ni-Mo catalysts. The present work reveals that finely adjusting Ni-Al2O3 interaction is an effective strategy for improving the performance of hydrodesulfurization catalysts. (C) 2020 Elsevier Inc. All rights reserved.

Molecular Simulation Study on Intrinsic Order of Interaction Between Single Slab of Active Phase and Al-Si Support in Hds Catalysts

Effect of Direct Synthesis Al–SBA-15 Supports on the Morphology and Catalytic Activity of the NiMoS Phase in HDS of DBT

Effect of support texture properties on Ni-Fe/γ-Al_2O_3 catalyst structure and catalytic performance for CO methanation

Regulating the Microenvironments and the D-Band Center of Hierarchical Nimos/Ts-1 Catalyst by Zro2 to Enhance the Hydrodesulfurization Performance of Dibenzothiophene

MAS NMR, TPR, and TEM Studies of the Interaction of NiMo with Alumina and Silica–alumina Supports

New Insight into the Support Effect on HDS Catalysts: Evidence for the Role of Mo-support Interaction on the MoS2 Slab Morphology

Olefin Metathesis over Heterogeneous Catalysts: Interfacial Interaction Between Mo Species and a Hβ−Al2O3 Composite Support

The Role of Alumina in the Supported Mo/HBeta–Al2O3 Catalyst for Olefin Metathesis: A High-Resolution Solid-State NMR and Electron Microscopy Study

Effect of Si/Al Ratio of Mesoporous Support on the Structure Evolution and Catalytic Performance of the Cu/Al-HMS Catalyst

Structural optimization of 3D printed SiC scaffold with gradient pore size distribution as catalyst support for methanol steam reforming

Effects of the Support Brønsted Acidity on the Hydrodesulfurization and Hydrodenitrogention Activity of Sulfided NiMo/Al 2 O 3 Catalysts

Influence of Active Phase Structure of CoMo/Al2O3 Catalyst on the Selectivity of Hydrodesulfurization and Hydrodearomatization

Research on Si–Al Based Catalysts Prepared by Complete Liquid-Phase Method for DME Synthesis in a Slurry Reactor

Complete Liquid Phase Preparation and Characterization of CuZnAlSi Catalysts for DME Synthesis in Slurry Reactor

Active phase morphology engineering of NiMo/Al 2 O 3 through La introduction for boosting hydrodesulfurization of 4,6-DMDBT

A study on the origin of the active sites of HDN catalysts using alumina-supported MoS3 nanoparticles as a precursor

Co-Based Catalysts Supported on Silica and Carbon Materials: Effect of Support Property on Cobalt Species and Fischer–Tropsch Synthesis Performance

The Significant Role of the Atomic Surface Structure of Support in Strong Metal-Support Interaction

XPS Characterization of Carbon Nanotube Supported CoMo Hydrodesulfurization Catalysts

Control of metal-support interaction in magnetic MoS2 catalyst to enhance hydrodesulfurization performance

Effects of Ni–Al2O3 Interaction on NiMo/Al2O3 Hydrodesulfurization Catalysts