Abstract:Inconel 718 (IN718) nickel-based superalloy is widely used in aerospace and nuclear applications owing to its excellent comprehensive mechanical properties, oxidation resistance, and hot corrosion resistance. However, the elemental segregation caused by heterogeneous solidification during casting has great influence on the mechanical properties. Therefore, accurately characterizing the segregation behavior is necessary. Traditional quantitative characterization of elemental segregation uses various sampling methods, in which only macroscopic segregation results are obtained. In this study, micro-beam X-ray fluorescence (μ-XRF) is used for the quantitative characterization of element micro-segregation in IN718 superalloy. The concentration distributions of Cr, Fe, Mo, Nb, and Ti in IN718 alloy are determined with optimized testing parameters, and the degree of elemental segregation in different regions of the analytical area is calculated. It is found that the segregation degree of Nb and Ti in the testing area is larger than other alloying elements. The correlation between the microstructure distribution and the segregation degree of Nb and Ti has been studied using scanning electron microscopy (SEM) combined with energy-dispersive spectrometry (EDS). There is severe segregation of Nb and Ti in areas where Nb-containing precipitates are accumulated. The distribution of abnormal signals of Nb with a high fluorescence intensity has a close relationship with the area of precipitates-enriched Nb.

Phase Transformation and Liquid Density Redistribution During Solidification of Ni-based Superalloy Inconel 718

Density Determination and Simulation of Inconel 718 Alloy at Normal and Metastable Liquid States

Microstructural Characterization and Phase Separation Sequences During Solidification of Ni3Al-Based Superalloy

Effects of Solidification Rate on Segregation and Fluid Flow Tendency in Mushy Zone of Directionally Solidified Superalloy Inconel 718

Phase Field Simulation of Monotectic Transformation for Liquid Ni-Cu-Pb Alloys

Solute Redistribution and Rayleigh Number in the Mushy Zone During Directional Solidification of Inconel 718

Microstructures and Nb-Rich Precipitation Behaviors of Inconel 718 Superalloy under Sub-rapid Solidification Process

Solidification and Segregation Behaviors of Superalloy IN718 at a Slow Cooling Rate

Effects of Remelting Temperature on the Segregation and Rayleigh Number in the Mushy Zone of Directionally Solidified Superalloy Inconel 718

Liquid Phase Separation and Rapid Dendritic Growth of Highly Undercooled Ternary Fe62.5cu27.5sn10 Alloy

Liquid Phase Separation and Subsequent Dendritic Solidification of Ternaryfe35cu35si30alloy

EFFECTS OF SUPERHEAT ON THE MICROSEGREGATION AND FLUID FLOW TENDENCY DURING DIRECTIONAL SOLIDIFICATION OF SUPERALLOY In718

Solute Redistribution During Phase Separation of Ternary Fe–Cu–Si Alloy

Investigation of Solidification and Segregation Characteristics of Cast Ni-Base Superalloy K417G

Liquid Channel Segregation and Morphology and Their Relation with Hot Cracking Susceptibility During Columnar Growth in Binary Alloys

Solute Redistribution Profiles During Rapid Solidification of Undercooled Ternary Co-Cu-Pb Alloy

Solidification Characteristics and Segregation Behavior of a Ni-Fe-Cr Based Alloy

Supersolidus liquid phase sintering of Inconel 718 powder alloy

Phase Field Simulation of Alloying Element Segregation During Solidification of DD5 Nickel-Base Single Crystal Superalloy

Microsegregation behavior of Inconel 718 superalloy prepared by electron beam smelting layered solidification technology

Quantitative Characterization of Elemental Segregation in Inconel 718 Superalloy by Micro-Beam X-ray Fluorescence Spectroscopy and Its Correlation Study