Abstract:Boundary coordination is necessary for a shaking‐table substructure test (STST), which includes transferring forces and displacements between the tested and numerical substructures. Unlike other real‐time hybrid tests (RTHTs), the physical substructure is mounted on a shaking table and excited by the inertial force, which naturally requires a force control for boundary coordination. However, the natural velocity feedback in hydraulic actuators and high‐frequency noise in the force feedback signals makes it difficult to achieve force control. To solve these difficulties, in this study, a multi‐degree‐of‐freedom (MDOF) boundary‐coordinating device (BCD) is developed to simultaneously implement the boundary shear force and bending moment by the inertial force generated from shaking masses that are uniaxially driven by electromagnetic actuators. An STST framework was developed based on the BCD. The bottom two stories of a four‐story steel moment frame were selected as the physical substructure. A hydraulic shaking table was employed for ground excitation, and the BCD was used as the boundary coordinator for the numerical substructure, that is, the top two stories of the frame. To trace high‐frequency force signals, an enhanced three‐variable control (ETVC) method is proposed. Furthermore, an error‐response negative‐feedback compensation (ENC) method was developed to reduce the adverse effects of loading errors. Several rounds of STST tests demonstrated that the boundary commands were effectively traced by the BCD, so that the STST framework could consistently reproduce the seismic behavior of engineering structures.

Determination of the Dynamic Characteristics of a Multi-Point Excitation System Using Electrodynamic Shakers and Control of their Exciting Force

Control Strategy for Multi-Exciter Random Vibration Test

Design and Implementation of Vibration Test Control System of Multi-Exciter Synchronization

Application of force limited control in vibration test

Study on Excitation Force Characteristics in a Coupled Shaker-Structure System Considering Structure Modes Coupling

Study on Control Method and System of Multi-Shaker Random Vibration Test

Influence of flexible structure vibration on the excitation forces delivered by multiple electrodynamic shakers

Robust control of exciting force for vibration control system with multi-exciters

Electromechanical Coupling Dynamic Modeling and Analysis of Vertical Electrodynamic Shaker Considering Low Frequency Lateral Vibration

Shaking table tests of electromagnetic mass damper system for control of structural seismic response

Performance extension of shaking table‐based real‐time dynamic hybrid testing through full state control via simulation

Modeling and Vibration Decoupling Control of Multi-Axial Shaking Table

Control Strategies and Experimental Verifications of the Electromagnetic Mass Damper System for Structural Vibration Control

Synchronous Tracking Control Strategy of Dual-Actuator Excited Shaking Table

Highly dynamic force control for experimental vibration analysis with an electrodynamic shaker

Tracking Control Of An Electro-Hydraulic Shaking Table System Using A Combined Feedforward Inverse Model And Adaptive Inverse Control For Real-Time Testing

Shaking‐table substructure test using a MDOF boundary‐coordinating device

Evaluation of Control Accuracy for a Boundary-Coordinating Device in a Real-Time Hybrid Test

A Two-Loop Control Method for Shaking Table Tests Combining Model Reference Adaptive Control and Three-Variable Control

Control Structure Interaction of Electromagnetic Mass Damper System for Structural Vibration Control

Modeling and Testing for Electromagnetic Mass Damper and Structure Coupled System