Vibration Response of Bi-layer Steel Beams with Different Interface Conditions

Shanshan Wang,Qingwen Ren,Pizhong Qiao

2014-01-01

Journal of Vibration Engineering & Technologies

Abstract:The layered composite beam structures have been increasingly used in the fields of aerospace, civil and mechanical engineering, especially in composite construction and reinforcement and strengthening of structures. The increased use of layered composite beam structures requires a better understanding of vibration response of these beams and effect of their interface connectivity conditions. Most of the existing studies only concentrate on vibration response of layered beams with fully connected interface (e.g., fully bonded or welded or fixed interface conditions), and there are very few studies focusing on the layered beams with limited or partial interface connectivity conditions. In this study, random vibration response of a bi-layer beam with different interface connectivity conditions is investigated. The bi-layer beam consists of two steel sub-beams which are usually welded together at their edges in practice. The different welded interface conditions of the layered beam are simulated by using the buckles to hold (connect) the two steel sub-beams at various locations. Four different cases of the interface connectivity conditions of the bi-layer beam in a cantilever configuration are experimentally investigated: (A) free interface; (B) the sub-beams are only connected at the middle part with one buckle; (C) the sub-beams are only connected at the top part with one buckle; and (D) the sub-beams are connected at both the middle and top parts with two buckles. The excitation force is introduced as random vibration with a band limited white noise. The experimental results show that two steel sub-beams with the free interface condition vibrate harmonically at low exciting level; but interface impact is induced between these two sub-beams at high exciting level. The vibration response is effectively altered by changing the interface connectivity conditions in the bi-layer beam. The experimental results also indicate that the nonlinear severity of dynamic response of the bi-layer beam changes with the interface connectivity conditions, and it becomes less pronounced when the interface is strongly restrained (e.g., in Case D). Moreover, the strain distribution of the bi-layer beam with different interface conditions is measured when the beam is in the state of the first order resonance, and the measured strain of the bi-layer beam becomes smaller and more uniform when the interface is strongly restrained (or connected). The experimental characterization of the vibration response of the bi-layer beam presented sheds light on better understanding the effect of the interface connectivity to the beam dynamic behavior and provides a potential approach for condition assessment of layered structures.