Abstract:Abstract: Concrete is widely considered for its strength to withstand heavy loads and that‟s why this matrix is used for construction purposes. The growth in population has placed an enormous need for more and more infrastructure and it keeps growing. The outcome of this demand is the increase in production of cement. Massive amount of waste materials and byproducts are produced by manufacturing enterprises such as silica fumes, wood ash, and mineral slag and so on. As a result, waste management has become a huge problem for our environment. There are several minerals in wood ash, which can be extracted for further use. A big ingradient calcium carbonate, which is 25% or even 45% (depending on feedstock and burining condition). Less than 10 percent is potash and less than 1 percent is phosphate; there are some elements of iron, manganese, zinc, copper and some metal parts. These numbers however, vary as combustion temperature is an important element for the determination of wood ash. Many of these are in the form of oxides, mainly. If we mix the ashes to water the insoluble silica and calcium carbonate will settle to bottom and sodim salt and soluble potassium will dissolve. Sugarcane is commonly used to produce sugar and ethanol. After sugar juice is extracted from sugarcane, sugarcane bagasse is produced, which is about 50% of the sugarcane level. Bagasse is widely used as a fuel in combining steam production and power generation. In this process, sugarcane ash (SCBA) remains the last waste in the sugar production chain.. However, SCBA is generally disposed of in landfills in India The experimental investigations are carried out for compressive strength, split and flexural strength for curing period of 7, 14 and 28 days. The experimental results show that the for a combined replacement percentage of 8&8%, which includes 8% SCBA and 8% WOOD ASH with addition of aramid fiber 1.2% the values of compressive strength, flexural strength and split tensile strength were higher when compared to other replacement percentages The result shows that concrete workability is fine and within limits after replacing cement with SCBA, WOOD ASH with addition of aramid fiber. However, workability gets reduced at higher replacement of materials. The strength parameters such as compressive strength, flexural strength, and split tensile strength also increase and show an optimum value at 8&8% cement replacement and 1.2% Addition of aramid fibers respectively.

Physicochemical Study of Bagasse and Bagasse Ash from the Sugar Industries of NWFP, Pakistan and Its Recycling in Cement Manufacturing

Physico-chemical Study of Bagasse and Bagasse Ash from the Sugar Industries of NWFP Pakistan and Remediation of Environmental Problems Caused by Refused Bagasse Ash

Recycling of Bagasse Ash in Cement Manufacturing and its Impact on Clinker Potential and Environmental Pollution

Raw Mix Designing and Clinkerization of High Strength Portland Cement with Bagasse Ash and Its Impact on Clinker Moduli and Fuel Consumption

Use of Bagasse Ash in Concrete and Its Impact on the Strength and Chloride Resistivity

Short-term analysis on the combined use of sugarcane bagasse ash and rice husk ash as supplementary cementitious material in concrete production

Sugarcane bagasse ash as supplementary cementitious material in concrete- a review

Potential of sugarcane bagasse ash as supplementary cementitious material and comparison with currently used rice husk ash

To Study the Partial Replacement of Cement with Sugarcane Bagasse and Wood Ash with Addition of Aramid Fiber

Sugar cane bagasse ash as a partial substitute of Portland cement: Effect on mechanical properties and emission of carbon dioxide

Characterization of sugarcane bagasse ash as a potential supplementary cementitious material: Comparison with coal combustion fly ash

Improving Engineering Characteristics of Expansive Soils Using Industry Waste As a Sustainable Application for Reuse of Bagasse Ash

Valorization of Sugarcane Bagasse Ash as an Alternative SCM: Effect of Particle Size, Temperature-Crossover Effect Mitigation & Cost Analysis

Slag and Bagasse Ash: Potential Binders for Sustainable Rigid Pavement

Sugarcane bagasse ash as supplementary cementitious material in cement composites: strength, durability, and microstructural analysis

Physicomechanical, Wettability, Corrosion, Thermal, and Microstructural Morphology Characteristics of Carbonized and Uncarbonized Bagasse Ash Waste-Reinforced Al-0.45Mg-0.35Fe-0.25Si-Based Composites: Fabrications and Characterizations

Study of physical and mechanical behavior of artificial lightweight aggregate made of Pakistani clays

Exploration of solid waste materials for sustainable manufacturing of cementitious composites

Valorization of bottom ash in concrete: serviceability, microstructural and sustainability characterization

Sustainability and mechanical property assessment of concrete incorporating eggshell powder and silica fume as binary and ternary cementitious materials

Development of sustainable alkali activated composite incorporated with sugarcane bagasse ash and polyvinyl alcohol fibers