Abstract:To study the mid-frequency acoustic–structure in the cab of construction machinery vehicle, a prediction model was established based on the FE–SEA hybrid method. Model parameters, such as the modal density, the internal loss factor and the coupling loss factor of each subsystem, were calculated by the theoretical methods. The sound pressure excitation and vibration excitation of the model obtained through the real vehicle experimental tests and the mid-frequency vibration characteristics of the cab in the frequency range of 100–800 Hz under composite excitation were studied. In order to verify the accuracy of the hybrid model, the full FE acoustic–structure coupling model of the cab was also established, and the modal calculation of the cab was carried out. In the end, the two methods were verified by the real sound pressure test in the cab. The results show that the hybrid model has a great deviation from the experimental results in the low-frequency region of 20–80 Hz, and the calculation accuracy is lower than that of the FE model. The prediction accuracy starts to rise when frequency is higher than 80 Hz; especially in the mid-frequency region of 100–800 Hz, the hybrid model accuracy reaches the highest with results basically consistent with the experiment. In addition, in the high-frequency range, higher than 800 Hz, the prediction results also agree well with the experimental ones. It should be pointed out that the hybrid model cannot accurately capture the peak value of the response in the noise prediction, but it can guarantee the accuracy, improve the calculation efficiency and improve the prediction accuracy in the mid-frequency region.

IMPROVEMENT OF PREDICTION ACCURACY OF COMPLICATED STRUCTURE ACOUSTIC RADIATION IN MID-FREQUENCY RANGE UNDER MULTIPLE-EXCITATION CONDITION

Analysis and Experimental Validation of the Middle-Frequency Vibro-Acoustic Coupling Property for Aircraft Structural Model Based on the Wave Coupling Hybrid Fe-Sea Method

Method for estimating internal loss factor of plate&shell structure based on acoustic excitation

A novel hybrid ES-FE-SEA for mid-frequency prediction of Transmission losses in complex acoustic systems

Numerical simulation and experimental researches on the vibration–acoustic coupled property of an aircraft model under strong reverberation noise

A Computational Method for Acoustic Interaction with Large Complicated Underwater Structures Based on the Physical Mechanism of Structural Acoustics

Aircraft Structure’s Response Prediction Analysis and Experimental Study in High-strength Broadband Noise Environments

FEM/ACA-BEM COUPLING FOR STRUCTURAL- ACOUSTIC DESIGN SENSITIVITY ANALYSIS

Hybrid Finite Element/Wave-based Method for Acoustic Prediction

A Novel Hybrid FS‐FEM/SEA for the Analysis of Vibro‐acoustic Problems

A Hybrid Boundary Element-Statistical Energy Analysis for the Mid-Frequency Vibration of Vibro-Acoustic Systems

Acoustic–structure modeling and analysis of an engineering machinery cab based on the hybrid method and experimental investigations

Investigation of Structural Response and Noise Reduction of an Acoustical Enclosure Using Sea Method

Interior noise prediction of a sound cavity based on hybrid FE-SEA method

Reduction of Hybrid FE-SEA Model for the Mid-Frequency Vibration of Vibro-Acoustic Systems Using Dynamic Condensation Approach

An Improved Hybrid FE-SEA Model Using Modal Analysis for the Mid-Frequency Vibro-Acoustic Problems

Acoustic Absorption Of Locally Resonant Structures Using Simplified Finite Element Method

Study on FE-SEA Modeling and Acoustic Performance of Heavy Duty Commercial Vehicle Based on Experimental Statistical Energy Parameters

Low-Frequency Acoustic-Structure Analysis Using Coupled FEM-BEM Method

Coupling and Optimization Analysis of Magnesium Bulkhead and Interior Sound Field Based on SEA

Structural-acoustic Optimization Based on Fast Multipole Boundary Element Method Sensitivity Analysis of a Coupled Acoustic Fluid-Structure System