Abstract:Finite Element Method (FEM) and the Statistical Energy Analysis (SEA) are standard methods in the automotive industry for the prediction of vibrational and acoustical response of vehicles. The FE method, based on a deterministic description of the dynamics is typically used for structure-borne and air-borne problems and is usually limited to below 250 Hz. The method becomes prohibitively expensive in terms of computational costs with increasing frequency as more Degrees-of-Freedom (DOF) are required to correctly represent the dynamic response of the structure. Additionally, the dynamic response becomes sensitive to small perturbations in the model, thus defeating the purpose of a deterministic modeling method. SEA is a statistical method widely applied in automotive industry for air-borne problems at frequencies higher than 300 Hz. The method is highly efficient for the design and optimization of sound packages facing airborne sources, but it lacks accuracy when dealing with structure-borne sources in the mid frequency range. However, both methods are not capable of handling the so called "mid frequency problem", where both short and long wavelength components are present in the same system. A Hybrid method has been recently proposed that rigorously couples SEA and FEM. In this work, the HybridFE-SEA method has been used to create fast/efficient model of structure-borne noise in a fully trimmed vehicle from 200Hz to 1 kHz. This paper first describes simple guidelines used to partition the vehicle into stiff components described with FE and modally dense components described with SEA. It is also demonstrated how detailed local FE models can be used to improve SEA descriptions of car panels and couplings. After review of the Hybrid FE-SEA models of a full vehicle that were built, sample experimental validation results of interior Sound Pressure Levels and panel vibration are shown for both bare and fully trimmed vehicle configurations.

An Improved Hybrid FE-SEA Model Using Modal Analysis for the Mid-Frequency Vibro-Acoustic Problems

A hybrid CSRPIM/SEA method for the analysis of vibro-acoustic problems in mid-frequency range

Mid Frequency Structure-Borne Noise Modeling in a Trimmed Automotive Vehicle

Acoustic–structure modeling and analysis of an engineering machinery cab based on the hybrid method and experimental investigations

Mid-frequency vibration Analysis of Built-up Structures using WFE-SEA Method

Design and optimization of local acoustic response in mid-frequency vibro-acoustic systems

An Efficient Modeling Approach for Mid-frequency Trim Effects

A Hybrid Wave Propagation and Statistical Energy Analysis on the Mid-Frequency Vibration of Built-Up Plate Systems

Coupling and Optimization Analysis of Magnesium Bulkhead and Interior Sound Field Based on SEA

Modeling and Analysis for Sound Field of Rectangular Small Enclosure under the Excitation of Panel Loudspeaker by Using FEM

A New Quantitative Acoustic Emission Model for Damage Characterization of Composite Laminates Using Original Waveforms

Layout optimization of porous sound-absorbing material in mid-frequency vibro-acoustic systems

Structural modal identification and MCMC-based model updating by a Bayesian approach

A multi-scale model-order reduction strategy for vibration analysis of coupled structures with local inhomogeneities

Research on the insertion loss of sound package under structure-borne and airborne excitation in mid-frequency using Hybrid FE-SEA method

Sensitivity Analysis of Underwater Structural-Acoustic Problems Based on Coupled Finite Element Method/Fast Multipole Boundary Element Method with Non-Uniform Rational B-Splines

Finite element analysis of lateral field excited thickness shear mode film bulk acoustic resonator

Sound Insulation Numerical Calculation of an Automobile Magnesium Alloy Dash Based on FE-SEA Hybrid Method

Mid-frequency band IL of sound package under structure excitation

Numerical study of underwater acoustic radiation and propagation induced by structural vibration in ocean environments using FEM-BMSBM

Application of improved hybrid interface substructure cms method in the modal analysis of mistuned bladed disk assemblies