Abstract:The cross-shaped stiffened concrete-filled steel tubular stub column is constructed by incorporating steel reinforcement ribs into the traditional cross-shaped design, which helps delay the buckling of the steel tube and enhances its restraining effect on the concrete. However, existing standards and research proposed design methods for estimating the post-fire bearing capacity of steel reinforced concrete stub columns are primarily applicable to the ordinary steel tubes with conventional thickness and sections. Therefore, it is necessary to investigate the axial compressive properties of high-strength concrete stub columns with irregular thin-walled steel tubes after exposure to fire, which can contribute to their potential future application. Effects of various experimental parameters, such as heating time, width-thickness ratio, and longitudinal spacing of stiffeners were investigated. In total one specimen subjected to ambient temperature and eight cross-shaped stiffened concrete-filled steel tubular stub columns subjected to fire conditions were prepared for measuring temperature-time curves of specimens during ISO-834 standard fire, load-displacement curves, load-transverse, and longitudinal strain curves of specimens under axial compression loading. The failure modes of the specimens were recorded, and the influence of each parameter on the post-fire mechanical properties of the specimens was analyzed based on the experimental results. ABAQUS software was utilized to develop a model for post-fire analysis, which was validated by comparing it with experimental data. After validation, the model was used to analyze the underlying mechanism, and a comprehensive parametric study of members was conducted. Based on the results of the parametric study and the model developed for calculating bearing capacity of the cross-shaped stiffened concrete-filled steel tube stub column at ambient temperature, a simplified equation accounting for the effects of elevated temperature was proposed to predict the residual bearing capacity of the cross-shaped stiffened concrete-filled steel tube stub column after fire exposure. The average error between the simplified formula and the finite element simulation results is 0.925, and the mean square error is 0.085.

Postfire Performance of Prestressed Concrete Hollow-Core Floor Systems with Edge Beams

Effects of sustained axial load and cooling phase on post-fire behaviour of reinforced concrete stub columns

Effects of preload and cooling phase on post-fire behaviour of concrete-filled steel tubular stub columns

Effects of sustained axial load and cooling phase on post-fire behaviour of concrete-filled steel tubular stub columns

Mechanical Properties of Full-Scale Prestressed Concrete Beams with Thin Slab after Exposure to Actual Fire

Experimental Study on the Structural Performance of Reinforced Truss Concrete Composite Slabs during and after Fire

Experimental Analysis of Anti-Fire Capacity of Simply Supported Prestressed Concrete Slabs

Fire Behaviour of Continuous Reinforced Concrete Slabs in a Full-Scale Multi-Storey Steel-Framed Building

Behavior of Cross-Shaped Stiffened Concrete-Filled Steel Tubular Stub Columns after Fire Exposure

Flexural Performance of Fire Damaged and Rehabilitated Two Span Reinforced Concrete Slabs and Beams

A Fire Test on Continuous Reinforced Concrete Slabs in a Full-Scale Multi-Story Steel-Framed Building

Experiment and Analysis on Mechanical Properties of Reinforced Concrete Beam after Fire

Experimental Investigation of Precast Composite Slabs Subjected to Natural Fires

Experimental Investigation on Thermal and Mechanical Behaviour of Composite Floors Exposed to Standard Fire

Experimental studies and theoretical analysis of the residual properties of the fire-damaged beam-slab assemblies

Experimental research on the bearing capacity of reinforced concrete continuous slab after fire

Residual Shear Capacity of Reinforced Concrete Beams after Fire Exposure

Behaviours of Unbonded Prestressed Continuous Concrete Slabs with Middle Span and Edge Span Subjected to Fire In-Order

Experiment and Analysis on the Mechanical Behaviour of PC Simply-Supported Slabs Subjected to Fire

Experiment and analysis on fire resistance of two-span unbonded prestressed concrete continuous slabs

Study on Detection, Evaluation and Reinforcement Technology on Fire Damaged PC Hollow Beam