Abstract:<p class="a-plus-plus">The pulse profiles of the Crab pulsar (as well as some other pulsars) vary with time. They can lead to a major source of intrinsic timing noise, which lacks a detailed physical model. The phase separation Δ between the first left peak (P1) and the second right peak (P2) is a key parameter that shows the variations of pulse profiles for the Crab pulsar. It was found that the evolution of A has a tendency with increasing rates of 0.82° ± 0.25°, 0.80° ± 0.54°, and 0.77° ± 0.28° per century for the 2–6, 6–15, and 15–60 keV bands, respectively. Furthermore, the flux ratios (P2/P1) of X-ray pulse profiles in the three bands were calculated, and the derived flux ratios were consistent with the radio and X-ray measurements of the <em class="a-plus-plus">Insight</em>-HXMT. In addition to discovering the physical origin of the pulse changes, the high-SNR X-ray pulse profiles were simulated in the annular gap model, and two model parameters (e.g., the maximum emission heights of the two peaks) were observed to slightly affect the variations of peak separation. We fitted the long-term variations of emission heights of the two peaks and discovered that the emission heights showed increasing tendencies with time. Variations of these emission heights induced a characteristic period derivative, and a complete formula for both the magnetic dipole radiation and wind-particle-induced variations of the moment of inertia was used for the pulsar's spin-down to obtain the variation rate ά of the magnetic inclination angle, which was −1.60° per century. Intrinsic timing noise is observed to be mainly induced by the variations of pulse profiles, which might correlate with a characteristic spin period derivative arising from the fluctuations of the emission regions. This work will lay a foundation for understanding the origin of intrinsic timing noise and making high-precision timing models in the future.</p>

An Inverse Compton Scattering (ics) Model of Pulsar Emission - Ii. Frequency Behavior of Pulse Profiles

An Inverse Compton Scattering Model for Radio Pulsars 1)

An inverse Compton scattering (ICS) model of pulsar emission

CONSTRAINT ON THE PARAMETERS OF THE INVERSE COMPTON SCATTERING MODEL FOR RADIO PULSARS

Pulse profile simulations for PSR 1237+25 and PSR 1933+16

Frequency Evolution Behavior of Pulse Profile of PSR B1737+13 with the Inverse Compton Scattering Model

Investigating the Multifrequency Pulse Profiles of PSRs B0329+54 and B1642–03 in an Inverse Compton Scattering Model

To Constrain the Parameter Space of the ICS Model

More Emission Cones: Multi-frequency Simulation of the Pulse Profiles of PSR J0437-4715

Polarization Properties of Radio Pulsars in the Inverse Compton Scattering(ICS) Model

Coherent Inverse Compton Scattering Responsible for Pulsar Polarized and Unpolarized Emission

Radio and Gamma-Ray Emissions from Pulsars: Possible Observational Tests

Psr B2111+46: A Test of the Inverse Compton Scattering Model of Radio Emission

A Joint model for radio and gamma-ray emission from pulsars

To Explain Crab Pulsar Emission by Ics Model

Investigation of individual pulse emission behaviours from pulsar J1741$-$0840

Long-term variations of X-ray pulse profiles for the Crab pulsar: data analysis and modeling

Model Spectra of Rotation Powered Pulsars in the INTEGRAL Range

A Study on the X-Ray Pulse Profile and Spectrum of the Crab Pulsar Using NICER and Insight-HXMT's Observations

MODELING MULTI-WAVELENGTH PULSE PROFILES OF THE MILLISECOND PULSAR PSR B1821–24

Investigation of Individual Pulse Emission Behaviors from Pulsar J1741–0840