Abstract:A new dual-bandpass 180° hybrid coupler, based on four properly designed shorted-stub loaded stepped-impedance resonators, is proposed in this paper. In order to construct the collaboratively designed coupler/filter, the resonators are coupled magnetically and electrically with each other through three shorted stubs and an open coupled line, respectively. According to the approach of filter synthesis and the derived design equations, the characteristic admittances and electrical lengths of the resonators and coupling sections are determined to achieve the desired resonant frequencies, external Q factors, and internal coupling coefficients for dual passbands. A design procedure is provided. The design flexibilities for ratios of central frequencies and achievable bandwidths are explored. The component shows both filtering and power dividing functions within two specific passbands, whose good performances are demonstrated by the simulated and measured results. The two second-order passbands of a fabricated prototype are located at 2.42 and 5.84 GHz, with 4.6% and 5.2% bandwidths, respectively. The insertion losses are 1.0 and 1.4 dB over 3-dB power division. The isolations are better than 23.5 and 32.8 dB. In both the in-phase and out-of-phase responses, the in-band amplitude and phase imbalances are always within -1.6-0.6 dB and -6.5°-9.5°, respectively.

Synthesis and Design of Filtering Antenna Based on J/K Inverters and lambda/4 Resonators

Synthesis and Design of Filtering Antenna Based on J/k Inverters and Ŀ/4 Resonators

Design of a high-selectivity quad-band bandpass filter based on λ/4 resonators with alternative J/K inverters

Collaborative Design of a New Dual-Bandpass 180 Hybrid Coupler

An Efficient Dual‐band Filter‐antenna Design Based on Simplified Integration Methodology

Synthesis and Design of Filtering Antenna With Flexible Passband and Radiation Null Based on Parallel Scheme

Design of a Wideband Parallel-Coupled Filtering Antenna Based on Dual-Frequency Matching Condition

Synthesis of wide-band bandpass filters with quarter-wavelength resonators

A High-Selectivity Filtering Antenna Based on Dual-Post Coaxial Resonators

Bandpass Filter Prototype Inspired Filtering Patch Antenna/Array

A Wideband Filtering Antenna Excited by Independent Triple-Mode Resonator

Co-design of Low Profile Single-Fed Circularly Polarized Filtering Antenna with High Out-of-band Rejection

Two-Port Dual-Band Filtering Network and Its Application on Filtering Antennas

Compact Low-Profile Wideband Filtering Antenna Without Additional Filtering Structure

Low-Profile Dual-Band Filtering Antenna with a Shared SIW Cavity

A Compact High-Selectivity Wideband Filtering Antenna With Multipath Coupling Structure

Design of a Multilayer Structure Microwave Filtering Antenna

Design of dual-band filtering patch antenna based on SIR multimode resonator

Design of K-Band SIW H-Plane Horn Antenna with Filtering Response

Co-designed Ring-Type Filtering Patch Antenna with Dual-mode Microstrip Ring Resonator

Co‐design of a Filtering Antenna Based on Multilayer Structure