Abstract:Frequency selective surface (FSS) has extensively been investigated over the past decades. The most famous applications of FSS are used for antennas radome and controlling radar cross section (RCS). FSS radome could reflect the signal out of the band so that the RCS could be reduced by shaping. However, with the development of radar detection technology, the scattering out of the band becomes non-negligible. In order to improve the problem, the FSS rasorber was proposed. It is the combination of the absorber and the radome. In this paper, a wideband transmission FSS rasorber is designed, acting as a stealthy radome to reduce the scattering out of band of the antenna system. The rasorber consists of an absorption layer (LayerA) and a transmission layer (LayerT). The LayerA, which use a resistor-loaded in Jerusalem cross element with non-touching centre, provides stable losses out of band and minimizes losses in the band. The LayerT use as the ground plane of an absorber based on the absorption layer within the total reflection band and providing a transmission window in the band. In order to obtain a wideband transmission, two series chokes are inserted in each leg in the LayerA and the LayerT adopts a second-order resonator. Moreover, the elements are packed densely owing to a skewed grid in the LayerA and the miniaturized non-resonant element in the LayerT. Superdense arrays cause a more stable performance of the rasorber, especially the delay of grating lobes onset. The composite structure is thoroughly analyzed by means of the full-wave numerical simulation. The simulation shows that the -1 dB transmission window is 5.7 ~ 6.7 GHz, and the -10dB reflection band is 2.2 ~ 5.1 GHz. The design would be widely used in broadband antenna system.

Realization of A Low Radar Cross Section Antenna Based on Band-Notched Absorber

Wideband Low RCS Antenna Based on Hybrid Absorptive-Diffusive Frequency Selective Reflector

Design of a Broadband Absorber Based on Antenna Reciprocity

Design of a Tunable Low-Frequency and Broadband Radar Absorber Based on Active Frequency Selective Surface

A Wideband Transmission Frequency Selective Surface Rasorber

A Low-RCS and Wideband Circularly Polarized Array Antenna Co-Designed With a High-Performance AMC-FSS Radome

A Wideband Transmission Frequency Selective Surface Rasorber with Low Insertion Loss

Tapered Resistive Sheets Loading to the FSS Absorber for the Wide-Angle Monostatic RCS Reduction Applications

Design of a Wideband Absorption Frequency Selective Rasorber Based on Double Lossy Layers

An Absorptive/ Transmissive Frequency Selective Surface Based Low-RCS Microstrip Antenna Array

An Integrated Antenna Array With Broadband, Low-RCS, and High-Gain Characteristics

A Thin and Broadband Tunable Radar Absorber Using Active Frequency Selective Surface

Novel Low-RCS Circularly Polarized Antenna Arrays via Frequency-Selective Absorber

Ultrabroadband Double-Sided and Dual-Tuned Active Absorber for UHF Band

RCS Reduction of Patch Array Antenna Using Anisotropic Resistive Metasurface

Low-profile shared-aperture metasurface array antenna with ultra-wideband radar cross section reduction and circularly polarization

Wideband low-RCS and gain-enhanced antenna using frequency selective absorber based on patterned graphene

Low-RCS Holographic Antenna with Enhanced Gain Based on Frequency-Selective Absorber

Ultra-wideband RCS reduction based on reflection cancellation and tunable absorption

In-Band RCS Reduction of Circularly Polarized Microstrip Antenna Array Based on a Novel Feed Network

A broadband reconfigurable rasorber radome based on AFSR for RCS reduction