Abstract:With the development of lithography technology in China from deep UV to extreme UV,the detection accuracy of lithography objective lens surface shape below nano or even sub nano is required. The detection accuracy of the commercial Tyman- Green and Fizeau interferometers is limited by their own standard reference mirror shape accuracy,which has been unable to meet the development needs of the above- mentioned ultra-precision detection. The point diffraction interferometry uses the micro aperture diffraction to produce an almost ideal spherical wave as the reference wave,which gets rid of the limitation of the measurement accuracy of the standard reference mirror,and opens up an effective way for the ultrafine surface shape detection in the field of lithography. The point diffraction method was proposed in the early 19th century and developed rapidly abroad,and the United States and Japan have developed molding equipment for point diffraction interferometers. The research on point diffraction interferometer in China started late,especially in the field of small hole point diffraction interferometry. At present,the research is mostly in the laboratory stage. One of the most important reasons restricting the improvement of its accuracy and the development of forming equipment is its phase shift. The existing small hole point diffraction interferometers mostly use high-precision piezoelectric ceramic phase shifter to drive the measured part to move for many times,and collect multiple interference images for phase extraction. The realization of this kind of time-domain multi- step phase-shifting technology relies on the import of expensive PZT on the one hand,and on the other hand,the interference image is easily affected by environmental interference during the long- term acquisition of interference images,resulting in low actual detection accuracy,especially low repeatability accuracy. In order to solve the problem that the phase shift depends on the piezoelectric ceramic phase shifter in the small hole point diffraction interferometer and the measurement is affected,a super precision surface transient interference detection method based on small hole point diffraction is proposed,and the system feasibility is verified from two aspects of theoretical analysis and comparative experiment. Two orthogonal circularly polarized beams are obtained by constructing a small hole diffraction interferometry optical path with reflective structure. The checkerboard phase grating is used to split the light and the polarizer array is phase-shifted,and four interference images with different phase shifts are simultaneously obtained on the CCD. The shape information of the measured surface can be obtained directly by processing the four instantaneous interference images collected at a single time. The theoretical analysis results of the system polarization state based on Jones matrix theory show that when the polarization angles of the polarization array are 0 degrees,45 degrees,90 degrees and 135 degrees,the introduced phase shifts are 0, pi/2, pi and 3 pi/2 respectively,which meet the requirements of the four- step phase extraction algorithm. The system can realize the transient detection by splitting the light through the chessboard phase grating and phase shifting with the polarizer array; Compared with the Zygo interferometer,the experimental results show that the measurement results of the proposed system are close to those of the Zygo interferometer,and the repeatability and accuracy of PV are better than those of the Zygo interferometer lambda/200,the repeatability accuracy of RMS is better than lambda/ 1 600. The experimental results show that the system is feasible and has good stability. The proposed system takes into account the advantages of high precision of point diffraction and strong anti-interference ability of synchronous phase shift. The principle is simple and easy to implement. The research results are conducive to promoting the process of small hole point diffraction interferometry from experimental research to instrument development.

Two-shot Point-Diffraction Interferometer with an Unknown Phase Shift

Phase Detection from Two Phase-Shifting Interferograms

One-Shot In-Line Digital Holography Based Hilbert Phase-Shifting

Single-shot reflective shearing point diffraction interferometer for wavefront measurements.

One-Shot In-Line Digital Holography Based Two-Dimensional Hilbert Demodulation Technique

One-shot Rapid Deterministic Phase Imaging by Beam Splitting Phase Modulation

Dynamic Fizeau Interferometer Based on the Lateral Displacements of the Point Sources

Development of Point Diffraction Interferometer by a Dimension-Reduction-based Phase-Shifting Algorithm.

Improved phase-shifting method for pinhole point diffraction interferometer based on a precise driving of the substrate

Simultaneous phase-shifting dual-wavelength interferometry based on two-step demodulation algorithm.

A Phase Difference Measurement Method for Integrated Optical Interferometric Imagers

On-line Three-Dimensional Inspection Using Randomly Phase-Shifting Fringe Based on Least-Square Iteration

The Comparison Of Two Kinds Of Fiber Phase Shifting Point-Diffraction Interferometer

Phase Retrieval in Two-Shot Phase-Shifting Interferometry Based on Phase Shift Estimation in a Local Mask.

Two-frame advanced iterative self-tuning algorithm for accurate phase retrieval

Multi-wavelength Pinhole Point Diffraction Interferometry for Optics Metrology with Interferometric Intensity Based Phase Retrieval Method

Spatial phase-shifting polarization point-piffraction interferometer for wavefront measurement

A Simple Phase Retrieval Algorithm from a Single Shot Interferogram

Phase-shift extraction for phase-shifting interferometry by histogram of phase difference.

Transient Interferometry of Ultra Precision Surface Based on Small Hole Point Diffraction

Simultaneous Phase-Shifting Dual-Wavelength Interferometry Based on Independent Component Analysis