Innovative CAID module design of product shape

CQ Xue

2005-01-01

Abstract:In this paper, the method of shape assembly is introdued to conceptual design of product shape. Feature matrix of product shape assembly are proposed. At last author gives out the diagram.. of realizing CAID module.

What problem does this paper attempt to address?

The Model Design of CAID for Innovation of Product Figuration

薛澄岐

DOI: https://doi.org/10.3969/j.issn.1672-1616.2003.04.020

2003-01-01

Abstract:Based on the method of the modality assembly, it presents the feature matrix of modality assembly analysis for industrial conceptual design. The flow chart of the CAID module is illustrated.
Collaborative assembly design technology based on semantics in grid

Lei Chen,Xiuzi Ye,Wei Peng,Sanyuan Zhang

2006-01-01

WSEAS TRANSACTIONS ON COMPUTERS

Abstract:Through analyzing the statuses of collaborative CAD technology, collaborative assembly (CA) design technology based on semantics in grid is promoted in point of the characters of large assembly. Using feature semantics, product data exchange and part modification of large assembly are implemented. Assembly semantics is the abstract and generalization of assembly constraints among parts. Research on product design based on semantics can prominently enhance the straight forwardness and efficiency of assembly design. Meanwhile, Grid computing technology enables a collection of grid computers to gain super computation power, so it can fast carry out manipulation and modification of large assembly. In this paper we present a novel CA system supporting heterogeneous CAD - GridCA, which is integrated with semantics and grid computing technology. A case study is further given to illustrate the effectiveness of the system.
Bounded rationality modeling in CAID

Kan Wu,Fang Liu,Lu Chang-de,Yang Xi-hui

DOI: https://doi.org/10.1109/ICMSS.2010.5578341

2010-01-01

Abstract:Differences in the perceptions of the products modeling between the clients and the designers is common thing in product design. The bounded rationality gives reasonable explanation that because of user's the limited cognitive abilities and quantity of information they hold. In order to establish a multi-perception product modeling and design system, the user's bounded rationality must be taken into account. This paper proposes a product design method which based on the user bounded rationality. A network surveying based on multiperception image is firstly created to carry out.Then, essential elements to product modeling were recognized and sort out with qualitative analysis,as well as the corresponding relationship between the product design and a number of the multiperception factors obtained through the second investigating. Based on this, the product design knowledge repository can thereby be established,and feature model identified through studying the user's multi-perception image can help designer to improve the success rate of design proposals. © 2010 IEEE.
An Affordance-Based Product Shape Design Method

Song Hong,Yu Suihuai,Ye Lin,Zhao Minglei

DOI: https://doi.org/10.1109/icdma.2013.30

2013-01-01

Abstract:Product shape is the key information carrier in the communication between consumer and product. To investigate shape characteristics and user's function judgment to the product and meet the requirements for functionality and aesthetic of product shape, an affordance-based product shape design method is proposed. Based on the analysis on the relationship among functionality, component, shape and affordance, a hierarchical model of product shape design property is presented, an affordance-based product shape vaccine abstraction method is proposed, and the adaptive immune genetic algorithm is used to build innovative design. According to this method, a Computer-Aided Intelligent Product Design System (CAIPDS) was implemented as a prototype. By applying it to the design of the cup, the affordance and its corresponding vaccines are constructed, and the shape design could be generated and evaluated rapidly. The result of design is satisfying and the proposed affordance-based product shape design method was verified.
Complex CAD Surface Shape Design Using Semantic Features

Fengbei Cheng,Zhenyu Liu,Guifang Duan,Chan Qiu,Bing Yi,Jianrong Tan

DOI: https://doi.org/10.1007/s12206-014-0628-y

IF: 1.81

2014-01-01

Journal of Mechanical Science and Technology

Abstract:To a large extent, the success of the product shape design depends on whether the geometric modeling systems can satisfy more and more complicated design demands in the engineering field. This paper proposes a shape design method based on semantic features for complex CAD surface. By the proposed method, we can easily meet the complicated design requirements, since the semantic can effectively represent the design intent. We discussed three aspects in shape design using semantic features, which are semantic design demands of the target surface, geometric constraints in accordance with semantic features, and surface shape deformation under the geometric constraints, respectively. The basic semantic features of geometric models drive the deformation of the target surface shape by changing the related constraint, and the desirable features are added to the CAD surface shape. The examples of the car shape design are presented to verify the effectives of our method.
Research on General Assembly Modeling Supporting Product Lifecycle Engineering Design

YI Jian-jun,LI Cheng-gang,HU Di-qing,DONG Jin-xiang

DOI: https://doi.org/10.3321/j.issn:1002-8331.2007.13.029

2007-01-01

Abstract:The essence of product assembly modeling is how to express the external and internal relations of assembly unit.Analyzing geometric modeling information of assembly unit,matching and connecting information and the constraint law of design,this paper puts forward a kind of general assembly modeling.This method is based on hiberarchy information of assembly unit,which is related to topological connecting information of assembly unit.It is designed to supporting product of lifecycle engineering design(LCED).There are the following advantages of this method:(1)Its modeling corresponds to the conceptual modeling of designer in data structure,which is easy for the designer to understand;(2)supporting the top-down design and the whole process of product LCED.
Visual Design Structure Matrix Method for Product Design Modules Identification

WANG Wen-dan,QIN Xian-sheng,YAN Xiu-tian,BAI Jing

DOI: https://doi.org/10.3969/j.issn.1006-5911.2007.12.009

2007-01-01

Computer Integrated Manufacturing Systems

Abstract:To identify modules for modularized design process,a visual Design Structure Matrix(DSM) method was proposed.Based on analysis of basic characteristics of modules,the concept of module intensity and its computation rules were introduced.And a DSM was utilized to model the interactions among all components of a given product.Then,a serial of values of module intensity for all potential modules were generated by imposing modules intensity on the new DSM optimized by genetic algorithm.As a result,the process of module identification could be visualized by coloring in the optimized-DSM with different transparency according to the values of module intensity,and a basis was generated to provide more choices and understanding for module identification under different design requirements.Finally,effectiveness and applicability of this approach were validated by its application in identifying the modules of CNC coiling machine.
Modeling of Product Family Configuration Driven by Axiomatic Intent

FENG Yi-xiong,ZHENG Shuang-yang

DOI: https://doi.org/10.3785/j.issn.1008-973x.2009.01.002

2009-01-01

Abstract:The creative design intent of mass customization was analyzed using axiomatic design aiming at the disadvantage of product design expression.The knowledges of product conceptual development process were classified as four clusters,namely,the design realm,the flection mapping,the independence axiom and the information axiom.The product family configuration model driven by axiomatic intent was established by using the intent express and information mapping technology.Then the integrity problems of interaction axioms among designers in product development process were solved.The realm mapping relation of product design intents and design parameters was expressed by the model,which provided the tool for designer to rapidly make the correct choice from many complex design schemes.The application in the elevator development shows that the method can faster respond customer requirements and achieve good economic benefits.
A product module identification approach based on axiomatic design and design structure matrix.

Qiang Cheng,Guojun Zhang,Peihua Gu,Xinyu Shao

DOI: https://doi.org/10.1177/1063293X12453350

2012-01-01

Abstract:In terms of creating customized products rapidly, modularity is deemed to be an effective developmental strategy for handling product variety and intricacy. In order to develop reasonable modular product architecture with physically detachable modules, a new systematic and structured approach for product modularization based on axiomatic design and design structure matrix is proposed. The product is decomposed hierarchically into its functional, physical, and process domains using axiomatic design method. After transformation from design matrix to design structure matrix, the pertinence design structure matrices of design parameters describing function, structure, and manufacturing process are constructed. Besides, a manufacturing process similarity matrix of design parameters is established. Finally, a genetic algorithm combined with the minimal description length is employed to realize the modularization optimization after integration of the above matrices. To illustrate the effectiveness of the proposed methodology, an indoor air conditioner unit is presented as a demonstrative example.
Structure analyzing of CAID information system on web based collaborating design

Xiao-bo HUANG,Shui-huai YU

DOI: https://doi.org/10.3969/j.issn.1001-3997.2005.09.063

2005-01-01

Abstract:As science and technology developed quickly, in industrial design fi eld, every designer has to handle with a bound of information and data when desi gn even a single product, for the inconstant market and design individuation pre vailed, it′s hard for an individual designer to master so much of knowledge in so many fields, so a web based ID calibrating information system is needed, for the sharing and enriching of design resources, and aid the design process as wel l, so it′s easy for the designer to learn and grasp the newest market and manuf acturing information, and related industrial standards also, which may contribut e a great deal for designing suitable, economic and elegant products.
A Feature-Based, Parametric Modeling System For Cad/Capp/Cam Integrated System

Hl Li,Jh Han,Jx Dong,Y Wang

1994-01-01

Abstract:To shorter product development time, this paper proposed an approach to developing feature based parametric product modeling systems which are suitable for integrated engineering design in CIMS environment. The architecture of ZD-MCADII and the characteristics of its each module are introduced in detail. ZD-MCADII's product data is managed by an object-oriented database management system OSCAR, and the product model is built according to the standard STEP. For the product design is established on a unified product model, all product data are globally associated in ZD-MCADII. ZD-MCADII provides various design features to facilitate the product design, and supports the integrity of CAD, CAPP and CAM.
Study On Computed Aided Product Decorative Design And Its Evaluation Method

Xihui Yang,Kan Wu,Fang Wang,Changde Lu

DOI: https://doi.org/10.1109/CAIDCD.2008.4730665

2008-01-01

Abstract:Computer Aided product decorative design is one of the significant branches of CAID. The way of expression in the former cases was limited by many conditions, which resulted in prolonged design cycle and low efficiency. This paper started with the aim of satisfying the demands of clients, offered a solution and procedure for solving complicated, multi-solution cases, for problems including prolonged design cycle, modification of cases, evaluation and decision-making with the purpose of obtaining the decorative design scheme which will satisfy the clients to the highest degree. Meanwhile the paper set the target of evaluation of Computer Aided Product Decorative Design and illustrated the eventual satisfactory evaluation result with examples of certain products.
Development of Integrated Design Software for Injection Machine Mould Board

刘文耀,应济

2010-01-01

Abstract:The parametric model and the parametric drive mechanism of the mould board were established.The data share mechanism and calling mechanism between CAD and CAE programs were also discussed and implemented.An integrated design software-HTFXS1.0,based on the UG and ANSYS,was developed in the environment of VC++.Finally the module of parameterized CAD and the CAE programs were integrated,which was appiled to real mould board of HTF530 injection machine.
Toward Effective Mechanical Design Reuse: CAD Model Retrieval Based on General and Partial Shapes

Min Li,Y. F. Zhang,J. Y. H. Fuh,Z. M. Qiu

DOI: https://doi.org/10.1115/1.4000253

2009-01-01

Journal of Mechanical Design

Abstract:In product design, a large proportion of three-dimensional (3D) computer-aided design (CAD) models can be reused to facilitate future product development due to their similarities in function and shape. This paper presents a novel method that incorporates modeling knowledge into CAD model similarity assessment to improve the effectiveness of reuse-oriented retrieval. First, knowledge extraction is performed on archived feature-based CAD models to construct feature dependency directed acyclic graph (FDAG). Second, based on the FDAG subgraph decomposition, two useful component partitioning approaches are developed to extract simplified essential shapes and meaningful subparts from CAD models. Third, the extracted shapes and their FDAG subgraphs are indexed. Finally, the indexed shapes that are similar to user-sketched queries are retrieved to reuse, and FDAG information of the retrieved shapes is provided as redesign suggestions. Experimental results suggest that the incorporation of modeling knowledge greatly facilitates CAD model retrieval and reuse. Algorithm evaluations also show the presented method outperforms other 3D retrieval methods. [DOI: 10.1115/1.4000253]
Automatic Assembly of Products Based on CATIA V5 Secondary Development

李维学,王仲奇,康永刚,殷俊清

DOI: https://doi.org/10.3969/j.issn.1000-4998.2010.01.014

2010-01-01

Abstract:The automatic assembly of products features manual work saving and efficiency improvement in digital modeling. The method of CATIA V5 secondary development is presented.The CATIA assembly document is opened with the aid of CAA and the existing component is added into the assembly to establish the constraints and implement the function of automatic assembly of products.The method of establishing the constraints with the help of coordinate axis system coincidence is put forward and verified by the automatic assembly of panels with an automatic drilling and riveting machine.
The Description of Product Model Based on Assembly Information

xiang yanping,zhang shensheng,bu fenglin

1996-01-01

Abstract:In this peper, the concept of assembly model has been given according to the analysis ofCAD-systems and new requisition for CAD. The authors also give detail description about the data structure of assembly, and experess the asse model by an example.
Product information modeling for capturing design intent for computer-aided intelligent assembly modeling

DOI: https://doi.org/10.1051/jnwpu/20224040892

2022-09-30

Xibei Gongye Daxue Xuebao/Journal of Northwestern Polytechnical University

Abstract:Authors: , and . Xibei Gongye Daxue Xuebao/Journal of Northwestern Polytechnical University Vol. 40 , page 892 Published online: 30/09/2022 Keywords: 设计意图 ; 交互特征偶 ; 产品信息模型 ; 智能装配建模 ; 计算机辅助设计 ; design intent ; interaction feature pair ; product information model ; intelligent assembly modeling ; computer-aided design.
An Integrated Disassembly Constraint Generation Approach for Product Design Evaluation

JingRong Li,QingHui Wang,Ping Huang

DOI: https://doi.org/10.1080/0951192x.2011.646310

IF: 4.1

2012-01-01

International Journal of Computer Integrated Manufacturing

Abstract:Computer-aided design (CAD) has been a de facto industry standard approach for common product design. Analysing the manufacturing factors of the product at its design stage can greatly reduce its cost at the later stages of product life cycle. This article presents an integrated approach of disassembly constraint generation, based on which an object-oriented prototype is designed and developed. The approach is implemented as an embedded application on commercial CAD software platform so as to provide a tight and seamless integration to CAD process. It utilises the CAD model information directly and allows designers to evaluate the on-going design for its disassembly properties. Moreover, since the modules and objects are well encapsulated, it is possible for further disassembly planning applications to build on top of or integrate to it. The case study on a widely used shaft assembly demonstrated the effectiveness of the integrated approach.
Computer-aided Conceptual Design System for Product Innovation

陆亮,孙守迁,黄琦,熊云飞

DOI: https://doi.org/10.3969/j.issn.1006-5911.2003.z1.010

2003-01-01

Abstract:A product information model is a key issue in the product design. The classic geometric features of product are expanded to component features (CF), which include geometric, engineering and semantic features. These features are recombined to general, layout, shape, and ergonomic features in succession. Based on triples, conditional constraint sets and multi-valued dependence diagrams, the component feature model (CFM) are used in building product information model. The techniques for product layout design and ergonomics in design are proposed. A design case based on our prototype system (PCDSC) is presented.
A Method for Representing Assembly Case of Complex Product Based on Disassembly Tree

Yuan Li,Gang Chen,Kaifu Zhang,Haicheng Yang

DOI: https://doi.org/10.3969/j.issn.1000-2758.2005.04.020

2005-01-01

Xibei Gongye Daxue Xuebao/Journal of Northwestern Polytechnical University

Abstract:Some knowledge or experience in the process of product assembly is very useful for the assembly process of following products. Case-based design (CBD) can achieve the knowledge or experience reusing, and case representation and storage is crucial for CBD. We presents a method for representing assembly case of complex product based on disassembly tree. The method includes two key steps. Firstly, assembly structure and assembly planning scheme are represented based on disassembly tree. In the disassembly tree, the node represents assembly-cell, such as assembly, sub-assembly, or part, and the line between two nodes represents the filiation between two assembly-cells. Then, assembly case representation is achieved. Secondly, storage of assembly case based on adjacency-matrix is presented. The adjacency-matrix includes an one-dimensional array and a two-dimensional array. The one-dimensional array is used to save the sequence and name of the nodes of disassembly tree, and the two-dimensional array is used to save the relationship between two nodes. Storage of assembly case based on adjacency-matrix has four characteristics. Finally, an example is given to prove that the above method is valid and effective.

Innovative CAID module design of product shape

The Model Design of CAID for Innovation of Product Figuration

Collaborative assembly design technology based on semantics in grid

Bounded rationality modeling in CAID

An Affordance-Based Product Shape Design Method

Complex CAD Surface Shape Design Using Semantic Features

Research on General Assembly Modeling Supporting Product Lifecycle Engineering Design

Visual Design Structure Matrix Method for Product Design Modules Identification

Modeling of Product Family Configuration Driven by Axiomatic Intent

A product module identification approach based on axiomatic design and design structure matrix.

Structure analyzing of CAID information system on web based collaborating design

A Feature-Based, Parametric Modeling System For Cad/Capp/Cam Integrated System

Study On Computed Aided Product Decorative Design And Its Evaluation Method

Development of Integrated Design Software for Injection Machine Mould Board

Toward Effective Mechanical Design Reuse: CAD Model Retrieval Based on General and Partial Shapes

Automatic Assembly of Products Based on CATIA V5 Secondary Development

The Description of Product Model Based on Assembly Information

Product information modeling for capturing design intent for computer-aided intelligent assembly modeling

An Integrated Disassembly Constraint Generation Approach for Product Design Evaluation

Computer-aided Conceptual Design System for Product Innovation

A Method for Representing Assembly Case of Complex Product Based on Disassembly Tree