Abstract:In laser-induced breakdown spectroscopy (LIBS), a focused laser pulse is used to ablate material from a surface and form a laser plasma that excites the vaporized material. Geometric factors, such as the distance between the sample and the focusing lens and the method of collecting the plasma light, can greatly influence the analytical results. To obtain the best quantitative results, one must consider this geometry. Here we report the results of an investigation of the effect of sampling geometry on LIBS measurements. Diagnostics include time-resolved spectroscopy and temporally and spectrally resolved imaging using an acousto-optic tunable filter (AOTF). Parameters investigated include the type of lens (cylindrical or spherical) used to focus the laser pulse onto the sample, the focal length of the lens (75 or 150 mm), the lens-to-sample distance (LTSD), the angle-of-incidence of the laser pulse onto the sample, and the method used to collect the plasma light (lens or fiber-optic bundle). From these studies, it was found that atomic emission intensities, plasma temperature, and mass of ablated material depend strongly on the LTSD for both types of lenses. For laser pulse energies above the breakdown threshold for air, these quantities exhibit symmetric behavior about an LTSD approximately equal to the back focal length for cylindrical lenses and asymmetric behavior for spherical lenses. For pulse energies below the air breakdown threshold, results obtained for both lenses display symmetric behavior. Detection limits and measurement precision for the elements Be, Cr, Cu, Mn, Pb, and Sr, determined with the use of 14 certified reference soils and stream sediments, were found to be independent of the lens used. Time-resolved images of the laser plasma show that at times >5 μs after plasma formation a cloud of emitting atoms extends significantly beyond the centrally located, visibly white, intense plasma core present at early times (<0.3 μs). It was determined that, by collecting light from the edges of the emitting cloud, one can record spectra using an ungated detector (no time resolution) that resemble closely the spectra obtained from a gated detector providing time-resolved detection. This result has implications in the development of less expensive LIBS detection systems.

Use of Dual-Pulse Laser-Induced Breakdown Spectroscopy for Characterization of the Laser Cleaning of A First Mirror Exposed in Hl-2a

Design, Fabrication and Characterization of Dispersive Mirrors for Ultrafast Lasers

Theoretical study on signal enhancement mechanism of coaxial DP-LIBS

In-situ analysis of laser-induced breakdown spectra for online monitoring of femtosecond laser machining of sapphire

Generation of High-Temperature and Low-Density Plasmas for Improved Spectral Resolutions in Laser-Induced Breakdown Spectroscopy

Nanosecond laser preheating effect on ablation morphology and plasma emission in collinear dual-pulse laser-induced breakdown spectroscopy

On the Improvement of Signal Repeatability in Laser-Induced Air Plasmas

Improvement of Spectral Intensity and Resolution with Fiber Laser for On-Stream Slurry Analysis in Laser-Induced Breakdown Spectroscopy

Laser damage thresholds of ITER mirror materials and first results on in situ laser cleaning of stainless steel mirrors

Characterization of multilayer coatings of aluminium, tungsten and molybdenum on steel substrate using laser-induced breakdown spectroscopy

Laser induced breakdown spectroscopy online monitoring of laser cleaning quality on carbon fiber reinforced plastic

Improving signal stability and analysis accuracy in laser-induced breakdown spectroscopy by multi-directional collection

Pretreatment with divided doses of steroids strongly decreases side effects of OKT3.

Effect of Sampling Geometry on Elemental Emissions in Laser-Induced Breakdown Spectroscopy

A review: experimental and applied research of double-pulse laser-induced breakdown spectroscopy

Utilization of Moderate Cylindrical Confinement for Precision Improvement of Laser-Induced Breakdown Spectroscopy Signal

Acoustic characteristics of laser-induced plasmas from the forming dynamics perspective

Temporal-resolved measurement using a dual light-collection for laser induced breakdown spectroscopy

Characterization of a Spatially Resolved Multi-Element Laser Ablation Ion Source

Flame-assisted plasma modulation to improve the raw signal quality for laser-induced breakdown spectroscopy

Diagnostics of tin droplet-based laser produced plasma by triple Langmuir probe