Abstract:Three-dimensional (3D) printing is a fabrication method that enables creation of structures from digital models. Among the different structures fabricated by 3D printing methods, helical microstructures attracted the attention of the researchers due to their potential in different fields such as MEMS, lab-on-a-chip systems, microelectronics and telecommunications. Here we review different types of 3D printing methods capable of fabricating 3D freeform helical microstructures. The techniques including two more common microfabrication methods (i.e., focused ion beam chemical vapour deposition and microstereolithography) and also five methods based on computer-controlled robotic direct deposition of ink filament (i.e., fused deposition modeling, meniscus-confined electrodeposition, conformal printing on a rotating mandrel, UV-assisted and solvent-cast 3D printings) and their advantages and disadvantages regarding their utilization for the fabrication of helical microstructures are discussed. Focused ion beam chemical vapour deposition and microstereolithography techniques enable the fabrication of very precise shapes with a resolution down to ∼100 nm. However, these techniques may have material constraints (e.g., low viscosity) and/or may need special process conditions (e.g., vacuum chamber) and expensive equipment. The five other techniques based on robotic extrusion of materials through a nozzle are relatively cost-effective, however show lower resolution and less precise features. The popular fused deposition modeling method offers a wide variety of printable materials but the helical microstructures manufactured featured a less precise geometry compared to the other printing methods discussed in this review. The UV-assisted and the solvent-cast 3D printing methods both demonstrated high performance for the printing of 3D freeform structures such as the helix shape. However, the compatible materials used in these methods were limited to UV-curable polymers and polylactic acid (PLA), respectively. Meniscus-confined electrodeposition is a flexible, low cost technique that is capable of fabricating 3D structures both in nano- and microscales including freeform helical microstructures (down to few microns) under room conditions using metals. However, the metals suitable for this technique are limited to those that can be electrochemically deposited with the use of an electrolyte solution. The highest precision on the helix geometry was achieved using the conformal printing on a rotating mandrel. This method offers the lowest shape deformation after printing but requires more tools (e.g., mandrel, motor) and the printed structure must be separated from the mandrel. Helical microstructures made of multifunctional materials (e.g., carbon nanotube nanocomposites, metallic coated polymer template) were used in different technological applications such as strain/load sensors, cell separators and micro-antennas. These innovative 3D microsystems exploiting the unique helix shape demonstrated their potential for better performance and more compact microsystems.

Helices in Micro-World: Materials, Properties, and Applications

Graphene Helicoid: Distinct Properties Promote Application of Graphene Related Materials in Thermal Management

Bioinspired Helical Microfibers from Microfluidics

Three-dimensional printing of freeform helical microstructures: a review

A review of helical carbon materials structure, synthesis and applications

High-Throughput and Controllable Fabrication of Helical Microfibers by Hydrodynamically Focusing Flow.

A review of advanced helical fibers: formation mechanism, preparation, properties, and applications

Hydrophobic or hydrophilic microhelices: Crafting surfaces with electrospun magnetic polystyrene fiber and an innovative top‐down technique

Facile Fabrication of Helical Microfluidic Channel Based on Rope Coiling Effect

Carbon Micro/Nano Machining toward Miniaturized Device: Structural Engineering, Large-Scale Fabrication, and Performance Optimization

Rapid Microfabrication of Helical Structures for Industrial Applications

Flexible 3-D Helix Fabrication by In-Situ SEM Micromanipulation System

Scalable fabrication of carbon-based MEMS/NEMS and their applications: a review

Bioinspired Microfibers with Embedded Perfusable Helical Channels

Anisotropic Rolling and Controlled Chirality of Nanocrystalline Diamond Nanomembranes toward Biomimetic Helical Frameworks.

Geometry Design, Principles and Assembly of Micromotors

High-throughput Microfabrication of Axially Tunable Helices

A rolled-up-based fabrication method of 3D helical microrobots

Rolled‐up Nanotechnology: Materials Issue and Geometry Capability

Conical Hollow Microhelices with Superior Swimming Capabilities for Targeted Cargo Delivery.

Recent Progress in the Preparation Technologies for Micro Metal Coils