Abstract:Applications of aluminum matrix composite (AMC) engineering components are being quickly developed and their numbers are increasing, but difficulties still exist in the direct fabrication of large AMC components. Joining thick composite plates without drawbacks has become an effective and alternative route, and friction stir welding (FSW) is the most promising and efficient technique, which should be selected first. In this work, 120-mm ultra-thick plates of 16 vol pct SiCp/2014Al composites were successfully joined by double-sided FSW. Microstructural characterization and mechanical properties of the composite joint along the transverse and thickness directions are investigated, respectively. Along the transverse direction changing from the base material (BM) to the heat-affected zone (HAZ) to the nugget zone (NZ), SiC particles are broken, blunted and uniformly distributed, and the aluminum grains are refined. The coarse precipitates are dissolved and then re-precipitated. Vickers microhardness of the composite joint gradually increases, and the peak values appear in the NZ. For the composite joint, the tensile strength is close to that of the BM showing a joint efficiency of 97 pct. Along the thickness direction varying from the top surface to middle section of the composite joint, the SiC particle size has no significant differences in the NZ, the aluminum grain size gradually decreases, and the precipitate size has some differences. Vickers microhardness of the composite joint decreases with increasing thickness in the NZ and HAZ, and no clear differences exist in the BM; tensile properties of the composite joint present few differences with varying thickness, and tensile failures usually occur in the BM. A good understanding and guide can be provided for joining ultra-thick plates of metal matrix composites by FSW in industrial applications.

Liquid-Phase-Impacting Diffusion Welding Mechanism and Microstructure of Welded Joint of Al Matrix Composite Sicp/101a

Diffusion welding SiCp/ZL101 with Ni interlayer

Study on diffusion welding SiCp/ZL101 with Cu interlayer

Liquid Phase Diffusion Bonding for SiC Particles Reinforced Aluminum Matrix Composites Using Pure Copper Inter-Layer

Microstructure Evolution, Interface and Mechanical Properties of SiCp/2A14 Joint During Laser Keyhole Welding

Influence of Ti-Al-Si-Mg on Microstructures and Mechanical Properties of Plasma Arc In-Suit Welded Joint of SiC_p/Al MMCs

Microstructure Features of In-situ SiCp/6061Al in Plasma Arc Welding by New Reinforced Phase

Interface structure and formation mechanism of vacuum-free vibration liquid phase diffusion-bonded joints of SiCp/ZL101A composites

Plasma arc welding of SiCp/Al MMCs based on in-situ weld-alloying

Effect of Ti–Si–Mg-Al Wire on Microstructure and Mechanical Properties of Plasma Arc In-Situ Welded Joint of SiCp/Al Composites

Diffusion Welding Process of Submicron Aluminium Matrix Composite Al2O3p/6061 Al

Study on Welding Process and Microstructure of Laser Welding High Volume Fraction SiC_p/2024Al Matrix Composite with Ti-6Al-4V Filler

<i>In situ</i> study on fracture behaviors of SiC/2A14Al composite joint: Co-construction of microstructure and mechanical properties via laser welding

In-situ formation Ti-Al-C compounds reinforced SiCp/2A14 Al joint: Microstructure evolution and mechanical properties

Interfacial Microstructure and Mechanical Properties of the Al/Ti Joint by Magnetic Pulse Welding

Laser Beam Oscillation Welded SiCp/2xx Al Alloy: Microstructure, Phase Interface and Mechanical Properties

Characterization of Si–Cu–C–Al quaternary interface of SiC/2A14 joint via counterintuitive laser butt welding

Microstructural Characterization and Mechanical Properties of 120-mm Ultra-thick SiCp/Al Composite Plates Joined by Double-Sided Friction Stir Welding

Microstructure and mechanical properties of SiCp/Al joints by electron beam welding

Approach to In-Situ Producing Reinforcing Phase Within an Active-Transient Liquid Phase Bond Seam for Aluminum Matrix Composite

Electron Beam Welding of Sicp/Al Composite to Ti-6al-4v