Abstract:In order to investigate the half-soaking galvanic accelerated corrosion and natural corrosion comparatively, an improved electrochemical model was established. Taking the diffusion of ions, potential distribution and polarization into consideration, the difference between two corrosion methods were essentially revealed. By changing the boundary conditions of the model, Finite Element Method (FEM) was applied to simulate corrosion potential distribution, ions concentration and current density both on the steel–concrete interface and within concrete. In natural corrosion, macrocell corrosion was coupled with microcell corrosion, and the anodic and cathodic current densities were self-balanced. To model the real corrosion under natural environment, the cathodic to anodic area ratio (Ac/Aa) of macrocell was assumed to be changing with the development of corrosion. In galvanic accelerated corrosion, the influence of external ions concentration on current density was considered, which eventually affected the distribution of rust layer of steel rebar. The simulation results agree well with the test data collected from literatures. A further discussion indicates that impressed current density significantly affects the time ratio of natural corrosion to galvanic accelerated corrosion, while the NaCl solution concentration shows no clear influence on time ratio. The bearing capacities of the corroded steel rebar under half-soaking method (HSM) and natural corrosion will show no clear difference, but the HSM method is not very appropriate for studying the corrosion cracking process of reinforced concrete.

Comparison of AC Corrosion of X80 Steel in Real Soil, Soil Extract Solution, and Simulated Solution

X80 Steel Corrosion Induced by Alternating Current in Water-Saturated Acidic Soil

Corrosion Behavior of X80 Steel in Different Simulated Soil Solution

Galvanic Effect and Alternating Current Corrosion of Steel in Acidic Red Soil

Cathodic Reactions Involved in the Corrosion of X80 Steel in Acidic Soil Simulated Solution

Influence of alternating current on corrosion behavior of X100 steel in Golmud soil simulated solution with different pH

Research on the corrosion behaviour of X80 steel in simulative soil solution

Corrosion Behaviors of X80 Pipeline Steel in Different Simulated Alkaline Soil Solution

A Comparison Study on the Natural and Half-Soaking Galvanic Accelerated Corrosion of Reinforced Concrete Based on an Improved Electrochemical Model

Analysis of the Long-Term Corrosion Behavior of X80 Pipeline Steel in Acidic Red Soil Using Electrical Resistance Test Technique

Relationship Between Dissolved Oxygen and Corrosion Characterization of X80 Steel in Acidic Soil Simulated Solution

Corrosion Behavior of X80 Pipeline Steel in Alkaline Sand Soil with Saturated Water

Soil Environmental Factors on the Corrosive Effects of Carbon Steel Grounding Materials

Comparison of Synergistic Effect of Counterions on Corrosion Inhibition of Mild Steel in Acid Solution: Electrochemical, Gravimetric and Thermodynamic Studies

Study on Electrochemical Corrosion Characteristics of X80 Pipeline Steel in Simulated Medium of Southeastern Acid Soil

A comparative study on the corrosion behavior of Q235 steel in saturated acidic red and yellow soils

Comparative Study on the Corrosion Behaviours of High-Silicon Chromium Iron and Q235 Steel in a Soil Solution

Effect of Alternating Current on Passive Film and Corrosion Behavior of Pipeline Steel with Different Microstructures in Carbonate/Bicarbonate Solution

Study on the Corrosion Characteristics of Grounding Materials in Acid Red Soil

Electrochemcial Corrosion Behavior of X80 Pipeline Steel in Yan'an Soil with Saturated Water

Effect of SRB and Applied Potential on Stress Corrosion Behavior of X80 Steel in High-pH Soil Simulated Solution