Abstract:A surface‐to‐bulk modification with Li2TiO3 coating and gradient Ti doping is demonstrated to solve the deterioration of LiCoO2 at high voltage. The synergetic modification enhances Li+ diffusion, facilitates the construction of high‐quality cathode/electrolyte interphase, reduces the phase transition from O3 to H1‐3 and Co3d/O2p band overlap, and restrains layer‐to‐spinel phase distortion, thus improving structural stability at 4.6 V. Elevating the charging cut‐off voltage is an effective strategy to increase the energy density of LiCoO2. However, unstable interfacial structures and unfavorable phase transitions in bulk are inevitably triggered during deep de‐lithiation at high voltage. Herein, an integrated surface‐to‐bulk Ti‐modification strategy is applied to LiCoO2, enabling uniform Li2TiO3 coating on the surface and gradient Ti‐doping toward the structural bulk. The resultant Ti‐modified LiCoO2 (T‐LCO) electrode can be stably cycled up to 4.6 V, providing a high‐rate capability of 137 mAh g−1 at 5C and a long‐life stability with 80.5% capacity retention after 400 cycles at 1C, far outperforming the unmodified LiCoO2 electrode with only 50.7% capacity retention. In situ X‐ray diffraction characterization and density functional theory calculation reveal that the synergistic modification of T‐LCO enhances Li+ diffusion, facilitates the construction of high‐quality cathode/electrolyte interphase, reduces the phase transition from O3 to H1‐3 and Co3d/O2p band overlap, and restrains layer‐to‐spinel phase distortion, thus improving structural stability at 4.6 V. This work presents a "two birds one step" strategy to enhance the cycling stability and achievable capacity of high‐voltage LiCoO2 for developing high energy density lithium‐ion batteries.

Surface Modification of Li-rich Layered Li(Li0.17Ni0.2Mn0.58Co0.05)O-2 Oxide with TiO2(B) as the Cathode for Lithium-ion Batteries

Surface Modification and Electrochemical Properties of Li-Rich Layered Cathode Materials for Lithium-Ion Batteries

Enhanced Electrochemical Performance of LiNi0.8Co0.15Al0.05O2 Cathode Material via Li2TiO3 Nanoparticles Coating

Investigation on performance of Li(Ni 0.5 Co 0.2 Mn 0.3 ) 1−x Ti x O 2 cathode materials for lithium-ion battery

Surface Coating with Li-Ti-O to Improve the Electrochemical Performance of Ni-rich Cathode Material

Enhancement of Electrochemical Performance of Li[Li0.2Mn0.54Ni0.13Co0.13]O2 by Surface Modification with Li4Ti5O12

Surface modification of Li-rich layered Li1.2Mn0.54Ni0.13Co0.13O2 oxide with Fe2O3 as cathode material for Li-ion batteries

Improving the Electrochemical Performance of Li-rich Li1.2Ni0.2Mn0.6O2 by Using Ni-Mn Oxide Surface Modification

Facile Synthesis and Enhanced Electrochemical Performances of Li2tio3-Coated Lithium-Rich Layered Li1.13ni0.30mn0.57o2 Cathode Materials for Lithium-Ion Batteries

Synthesis and Electrochemical Performance of Nano TiO2(B)-coated Li[Li0.2Mn0.54Co0.13Ni0.13]O-2 Cathode Materials for Lithium-Ion Batteries

Tuning the surface of LiNi0.8Co0.1Mn0.1O2 primary particle with lithium boron oxide toward stable cycling

Surface modification single crystal Li-rich Li1.2Mn0.54Ni0.13Co0.13O2 as high performance cathode materials for Li-ion batteries

Layered Cathode Material with Improved Cycle Performance and Capacity by Surface Anchoring of Tio2 Nanoparticles for Li-Ion Batteries

Research on LiNi_xMn_(2-x)O_4 Surface Modification of LiCoO_2 As Cathode Materials for Li-ion Batteries

Enhanced High-Potential and Elevated-Temperature Cycling Stability of Limn2o4 Cathode by Tio2 Modification for Li-Ion Battery

Enhanced Electrochemical Performance of Ti-doped Li1.2Mn0.54Co0.13Ni0.13O2 for Lithium-Ion Batteries

Enhanced Electrochemical Performance of Ti-Doping Li1.15Ni0.47Sb0.38O2 As Lithium-excess Cathode for Lithium-ion Batteries

Multifunctional Li2O-2B2O3 Coating for Enhancing High Voltage Electrochemical Performances and Thermal Stability of Layered Structured LiNi0.5Co0.2Mn0.3O2 Cathode Materials for Lithium Ion Batteries

Can surface modification be more effective to enhance the electrochemical performance of lithium rich materials?

TiO2 Coating of LiNi1/3Co1/3Mn1/3O2 Cathode Materials for Li-ion Batteries

Stabilizing 4.6 V LiCoO2 via Surface‐to‐Bulk Titanium Modification