Abstract:Purpose This paper aims to present the design development and measurement of two aerodynamic slotted X-bands back-to-back planer substrate-integrated rectangular waveguide (SIRWG/SIW) to Microstrip (MS) line transition for satellite and RADAR applications. It facilitates the realization of nonplanar (waveguide-based) circuits into planar form for easy integration with other planar (microstrip) devices, circuits and systems. This paper describes the design of a SIW to microstrip transition. The transition is broadband covering the frequency range of 8–12 GHz. The design and interconnection of microwave components like filters, power dividers, resonators, satellite dishes, sensors, transmitters and transponders are further aided by these transitions. A common planar interconnect is designed with better reflection coefficient/return loss (RL) (S 11 /S 22 ≤ 10 dB), transmission coefficient/insertion loss (IL) (S 12 /S 21 : 0–3.0 dB) and ultra-wideband bandwidth on low profile FR-4 substrate for X-band and Ku-band functioning to interconnect modern era MIC/MMIC circuits, components and devices. Design/methodology/approach Two series of metal via (6 via/row) have been used so that all surface current and electric field vectors are confined within the metallic via-wall in SIW length. Introduced aerodynamic slots in tapered portions achieve excellent impedance matching and tapered junctions with SIW are mitered for fine tuning to achieve minimum reflections and improved transmissions at X-band center frequency. Findings Using this method, the measured IL and RLs are found in concord with simulated results in full X-band (8.22–12.4 GHz). RLC T-equivalent and p-equivalent electrical circuits of the proposed design are presented at the end. Practical implications The measurement of the prototype has been carried out by an available low-cost X-band microwave bench and with a Keysight E4416A power meter in the microwave laboratory. Originality/value The transition is fabricated on FR-4 substrate with compact size 14 mm × 21.35 mm × 1.6 mm and hence economical with IL lie within limits 0.6–1 dB and RL is lower than −10 dB in bandwidth 7.05–17.10 GHz. Because of such outstanding fractional bandwidth (FBW: 100.5%), the transition could also be useful for Ku-band with IL close to 1.6 dB.

MILLIMETED WAVE WAVEGUIDE-TO-MICROSTRIP TRANSITION DESIGN

Simulation of waveguide-to-microstrip antipodal finline transition in V-band

Ka Band Transition Between Rectangular Waveguide and Substrate Integrated Waveguide

Improved circuit model for coplanar-waveguide to microstrip-line transition on silicon substrate

A Novel Millimeter-Wave Rectangular Waveguide-Microstrip Transition Based on the Principle of Magnetic Field Coupling

A Simple-Layout Antipodal Finline for Mm-Wave Applications

Novel Ka-Band Waveguide——Microstrip Transition Structure

Millimeter-Wave Waveguide-to-Microstrip Transition With a Built-In DC/IF Return Path

Waveguide-to-planar circuit transition for millimetre-wave detectors

Design of microstrip bandpass filter with enhanced stopband rejection based on coupled-mode theory

Waveguide-Based Meniscus Thin Lens For Broadband Mm-Wave Power Combining Applications

A Broadband Low-Loss SICL to Ridge Waveguide Transition for Millimeter-Wave Applications

Robust Microstrip to Empty Substrate-Integrated Waveguide Transition Using Tapered Artificial Dielectric Slab Matrix

Aerodynamic slotted SIW-to-MS line transition using mitered end taper for satellite and RADAR communications

A Tunable Microstrip-to-Waveguide Transition for Emergency Satellite Communication Systems

Design of a Novel Broadband Microstrip Line-Suspended Microstrip Line Transition Circuit

Novel Wideband Transition Between Coplanar Waveguide and Microstrip Line

Wideband Waveguide to Microstrip Probe Transition with LTCC Technology

Integrated microstrip and rectangular waveguide in planar form

Design of SIW Filter Transition Structure Based on Quarter-Wavelength Impedance Matching

Design of Tri-Band Antenna for WiMAX